Tra cứu tất cả các loại tiêu chuẩn.

Tiêu chuẩn Hoa Kỳ ASTM mới ban hành

ASTM A434/A434M - Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered has been revised to A434/A434M-18 developed by Committee A01.15, ASTM BOS Volume 01.05.

ASTM C915 - Standard Specification for Precast Reinforced Concrete Crib Wall Members has been reapproved, available as C915-79(2018) developed by Committee C27.20, ASTM BOS Volume 04.05.

ASTM D1065 - Standard Test Method for Unsaponifiable Matter in Pine Chemicals, Including Rosin, Tall Oil, and Related Products has been revised (with title change) to D1065-18 developed by Committee D01.34, ASTM BOS Volume 06.03.

ASTM D2402 - Standard Test Method for Water Retention of Textile Fibers (Centrifuge Procedure) has been reapproved, available as D2402-07(2018) developed by Committee D13.58, ASTM BOS Volume 07.01.

ASTM D2412 - Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading has been reapproved, available as D2412-11(2018) developed by Committee F17.40, ASTM BOS Volume 08.04.

ASTM D2497 - Standard Tolerances for Manufactured Organic-Base Filament Single Yarns has been reapproved, available as D2497-07(2018) developed by Committee D13.58, ASTM BOS Volume 07.01.

ASTM D2644 - Standard Tolerances for Yarns Spun on the Woolen System has been reapproved, available as D2644-12(2018) developed by Committee D13.58, ASTM BOS Volume 07.01.

ASTM D2645 - Standard Tolerances for Yarns Spun on the Cotton or Worsted Systems has been reapproved, available as D2645-07(2018) developed by Committee D13.58, ASTM BOS Volume 07.01.

ASTM D2653 - Standard Test Method for Tensile Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines) has been reapproved, available as D2653-07(2018) developed by Committee D13.58, ASTM BOS Volume 07.01.

ASTM D430 - Standard Test Methods for Rubber Deterioration—Dynamic Fatigue has been reapproved, available as D430-06(2018) developed by Committee D11.15, ASTM BOS Volume 09.01.

ASTM D4471 - Standard Test Method for Pyridine Bases in Cresylic Acid by Direct Titration has been revised to D4471-18 developed by Committee D16.02, ASTM BOS Volume 06.04.

ASTM D5602/D5602M - Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimenshas been revised to D5602/D5602M-18 developed by Committee D08.20, ASTM BOS Volume 04.04.

ASTM D5635/D5635M - Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimenshas been revised to D5635/D5635M-18 developed by Committee D08.20, ASTM BOS Volume 04.04.

ASTM D5807 - Standard Practice for Evaluating the Overpressurization Characteristics of Inflatable Restraint Cushions has been revised to D5807-18 developed by Committee D13.20, ASTM BOS Volume 07.02.

ASTM D6084/D6084M - Standard Test Method for Elastic Recovery of Asphalt Materials by Ductilometer has been revised to D6084/D6084M-18 developed by Committee D04.44, ASTM BOS Volume 04.03.

ASTM D7099 - Standard Terminology Relating to Frozen Soil and Rock has been reapproved, available as D7099-04(2018) developed by Committee D18.19, ASTM BOS Volume 04.09.

ASTM D8181 - Standard Specification for Microemulsion Blendstock for Preparing Microemulsion Test Fuel Oilsis a new standard, now available. D8181-18 developed by Committee D02.E0, ASTM BOS Volume 05.05.

ASTM E3022 - Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing has been revised to E3022-18 developed by Committee E07.03, ASTM BOS Volume 03.04.

ASTM F1250 - Standard Specification for Stationary Upright and Recumbent Exercise Bicycles and Upper and Total Body Ergometers has been revised (with title change) to F1250-18 developed by Committee F08.30, ASTM BOS Volume 15.07.

ASTM F2433 - Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness has been reapproved, available as F2433-05(2018) developed by Committee F17.40, ASTM BOS Volume 08.04.

ASTM F2951 - Standard Consumer Safety Specification for Baby Monitors has been revised to F2951-18 developed by Committee F15.68, ASTM BOS Volume 15.11.

ASTM F2987 - Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Heap Leach Aeration Applications has been reapproved, available as F2987-12(2018) developed by Committee F17.26, ASTM BOS Volume 08.04.

ASTM ISO/ASTM52910 - Additive manufacturing — Design — Requirements, guidelines and recommendationsEditorial Review Board change F3154-18 developed by Committee F42.04, ASTM BOS Volume 10.04.

Liên hệ với TechDoc để được hỗ trợ:

Dự thảo Tiêu chuẩn Hoa Kỳ ASTM đang xây dựng

ASTM WK64542 - Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) is a work item revision to existing standard D5191-15

ASTM WK64545 - Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) is a work item revision to existing standard D5191-15

ASTM WK64546 - Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene from Heavy Fuel Oils as Separability Number by an Optical Device is a work item revision to existing standard D7827-12(2017)

ASTM WK64548 - Standard Specification for Reinforced Concrete Low-Head Pressure Pipe is a work item revision to existing standard C361-16

ASTM WK64549 - Standard Specification for Protective Headgear Used in Martial Arts is a work item revision to existing standard F2397-09(2015)

ASTM WK64550 - Standard Test Method for Measurement of Resilient Floor Plank by Dial Gage is a work item revision to existing standard F2421-05(2011)

ASTM WK64551 - Standard Specification for Rubber Contraceptives (Male Condoms) is a work item revision to existing standard D3492-16

ASTM WK64552 - Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method is a work item revision to existing standard C231/C231M-17a

ASTM WK64553 - Standard Guide for Visual Inspection of Electrical Protective Rubber Products is a work item revision to existing standard F1236-16

ASTM WK64554 - Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase Separation; Optical Detection) is a work item revision to existing standard D7157-12(2018)

ASTM WK64555 -Test Method for Determination of the Carbon Tetrafluoride (Tetrafluoromethane) Activity of Activated Carbon (Trace Capacity Number Gas Phase or TCNG)

ASTM WK64556 - Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas ASTM Chromatography and Chemiluminescence Detection is a work item revision to existing standard D7807-12

ASTM WK64557 -Test Method for Determination of the Asphaltene Solvency Properties of Bitumen, Crude Oil, Condensate and/or Related Products for the Purpose of Calculating Stability, Compatibility for Blending, Fouling and Processibility (Manual Microscopy Method)

ASTM WK64558 -Guide for Evaluating Water Miscible Metalworking Fluid Foaming Tendency

ASTM WK64559 - Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure is a work item revision to existing standard C1618-13

ASTM WK64560 - Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure (Metric) is a work item revision to existing standard C1618M-13

ASTM WK64561 - Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method is a work item revision to existing standard C1214-13

ASTM WK64562 - Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric) is a work item revision to existing standard C1214M-13

ASTM WK64563 - Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement is a work item revision to existing standard A884/A884M-14

ASTM WK64565 - Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars is a work item revision to existing standard A934/A934M-16

ASTM WK64566 - Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars is a work item revision to existing standard A934/A934M-16

ASTM WK64567 - Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines is a work item revision to existing standard C969-17

ASTM WK64568 - Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric) is a work item revision to existing standard C969M-17

ASTM WK64569 - Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile is a work item revision to existing standard C497-18a

ASTM WK64570 - Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials is a work item revision to existing standard E662-17a

ASTM WK64571 - Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile is a work item revision to existing standard C497-18a

ASTM WK64572 - Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile (Metric) is a work item revision to existing standard C497M-18

ASTM WK64573 - Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile (Metric) is a work item revision to existing standard C497M-18

ASTM WK64574 - Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete is a work item revision to existing standard C311/C311M-17

ASTM WK64575 - Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete is a work item revision to existing standard C311/C311M-17

ASTM WK64576 - Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete is a work item revision to existing standard C311/C311M-17

ASTM WK64577 - Standard Specification for Microemulsion Blendstock for Preparing Microemulsion Test Fuel Oilsis a work item revision to existing standard D8181-18

Liên hệ với TechDoc để được hỗ trợ: