Danh mục các Tiêu chuẩn ASTM.

Giới thiệu Tiêu chuẩn ASTM.

Liên hệ với TechDoc để được hỗ trợ:

Tiêu chuẩn Hoa kỳ ASTM mới ban hành

ASTM A426/A426M - Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service has been revised to A426/A426M-18 developed by Committee A01.18, ASTM BOS Volume 01.02.

ASTM B179 - Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes has been revised to B179-18 developed by Committee B07.01, ASTM BOS Volume 02.02.

ASTM B392 - Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire has been reinstated as B392-18 developed by Committee B10.03, ASTM BOS Volume 02.04.

ASTM B393 - Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate has been reinstated as B393-18 developed by Committee B10.03, ASTM BOS Volume 02.04.

ASTM B394 - Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes has been reinstated as B394-18 developed by Committee B10.03, ASTM BOS Volume 02.04.

ASTM D1743 - Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases has been reapproved, available as D1743-13(2018) developed by Committee D02.G0.06, ASTM BOS Volume 05.01.

ASTM D2420 - Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method) has been reapproved, available as D2420-13(2018) developed by Committee D02.H0, ASTM BOS Volume 05.01.

ASTM D4052 - Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter has been revised to D4052-18 developed by Committee D02.04.0D, ASTM BOS Volume 05.02.

ASTM D4164 - Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers has been reapproved, available as D4164-13(2018) developed by Committee D32.02, ASTM BOS Volume 05.06.

ASTM D4180 - Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers has been reapproved, available as D4180-13(2018) developed by Committee D32.02, ASTM BOS Volume 05.06.

ASTM D5154/D5154M - Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test has been revised to D5154/D5154M-18 developed by Committee D32.04, ASTM BOS Volume 05.06.

ASTM D5463 - Standard Guide for Use of Test Kits to Measure Inorganic Constituents in Water has been revised to D5463-18 developed by Committee D19.05, ASTM BOS Volume 11.01.

ASTM D5534 - Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids has been reapproved, available as D5534-94(2018) developed by Committee D02.N0, ASTM BOS Volume 05.02.

ASTM D5907 - Standard Test Methods for Filterable Matter (Total Dissolved Solids) and Nonfilterable Matter (Total Suspended Solids) in Water has been revised to D5907-18 developed by Committee D19.05, ASTM BOS Volume 11.01.

ASTM D6581 - Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography has been revised to D6581-18 developed by Committee D19.05, ASTM BOS Volume 11.01.

ASTM D6850 - Standard Guide for QC of Screening Methods in Water has been revised to D6850-18 developed by Committee D19.05, ASTM BOS Volume 11.02.

ASTM D7527 - Standard Test Method for Measurement of Antioxidant Content in Lubricating Greases by Linear Sweep Voltammetry has been reapproved, available as D7527-10(2018) developed by Committee D02.G0.07, ASTM BOS Volume 05.04.

ASTM D7647 - Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinctionhas been reapproved, available as D7647-10(2018) developed by Committee D02.96.05, ASTM BOS Volume 05.04.

ASTM D7876 - Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants has been reapproved, available as D7876-13(2018) developed by Committee D02.03, ASTM BOS Volume 05.05.

ASTM D873 - Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method) has been reapproved, available as D873-12(2018) developed by Committee D02.14, ASTM BOS Volume 05.01.

ASTM D874 - Standard Test Method for Sulfated Ash from Lubricating Oils and Additives has been reapproved, available as D874-13a(2018) developed by Committee D02.03, ASTM BOS Volume 05.01.

ASTM E1732 - Standard Terminology Relating to Forensic Science has been revised to E1732-18 developed by Committee E30.92, ASTM BOS Volume 14.02.

ASTM E2505 - Standard Practice for Industrial Rope Accesshas been editorially changed, available as E2505-07(2014)e1 developed by Committee E06.55, ASTM BOS Volume 04.12.

ASTM E2586 - Standard Practice for Calculating and Using Basic Statistics has been revised to E2586-18 developed by Committee E11.10, ASTM BOS Volume 14.05.

ASTM E2634 - Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems has been revised to E2634-18 developed by Committee E06.21, ASTM BOS Volume 04.12.

ASTM F3318 - Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam is a new standard, now available. F3318-18 developed by Committee F42.05, ASTM BOS Volume 10.04. 

Liên hệ với TechDoc để được hỗ trợ:

Dự thảo Tiêu chuẩn Hoa Kỳ đang xây dựng

ASTM WK63730 - Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines is a work item revision to existing standard E2309/E2309M-16

ASTM WK63731 -Test Method for Standard Test Method for Determination of the Hexavalent Chromium Fraction in Plastic Materials by High Resolution Wavelength Dispersive X-Ray Fluorescence Spectroscopy

ASTM WK63732 - Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035) is a work item revision to existing standard F961-14

ASTM WK63733 - Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy Surgical Fixation Wire (UNS R30605) is a work item revision to existing standard F1091-12

ASTM WK63734 -Specification for Copper-Clad Steel Electrical Conductor for Tracer Wire Applications

ASTM WK63740 - Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials is a work item revision to existing standard E139-11

ASTM WK63742 - Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay is a work item revision to existing standard D7626-10

ASTM WK63743 - Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcementis a work item revision to existing standard A706/A706M-16

ASTM WK63745 - Standard Consumer Safety Performance Specification for Playground Equipment for Public Useis a work item revision to existing standard F1487-17

ASTM WK63746 - Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method is a work item revision to existing standard D4208-13

ASTM WK63747 - Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes is a work item revision to existing standard A213/A213M-18

ASTM WK63748 - Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes is a work item revision to existing standard A312/A312M-17

ASTM WK63749 - Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber is a work item revision to existing standard D245-06(2011)

ASTM WK63750 - Standard Practice for Establishing Clear Wood Strength Values is a work item revision to existing standard D2555-17a

ASTM WK63751 -Test Method for the Compressive Properties of Hydrogel Materials under Confined and Unconfined Compression

ASTM WK63753 - Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials is a work item revision to existing standard D6095-12

ASTM WK63754 - Standard Terminology Relating to Hydraulic Cement is a work item revision to existing standard C219-14a

ASTM WK63755 - Standard Index of Specifications for Ductile-Iron Pressure Pipe is a work item revision to existing standard A377-03(2014)

ASTM WK63756 - Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids is a work item revision to existing standard A674-10(2014)

ASTM WK63757 - Standard Specification for Ductile Iron Culvert Pipe is a work item revision to existing standard A716-08(2014)

ASTM WK63758 - Standard Specification for Ductile Iron Gravity Sewer Pipe is a work item revision to existing standard A746-09(2014)

ASTM WK63759 - Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings is a work item revision to existing standard C564-14 

Liên hệ với TechDoc để được hỗ trợ: