Tra cứu tất cả các loại tiêu chuẩn.

ASTM A781/A781M - Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use has been revised to A781/A781M-18a developed by Committee A01.18, ASTM BOS Volume 01.02.

ASTM A866 - Standard Specification for Medium Carbon Anti-Friction Bearing Steel has been revised to A866-18 developed by Committee A01.28, ASTM BOS Volume 01.05.

ASTM A929/A929M - Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe has been revised to A929/A929M-18 developed by Committee A05.17, ASTM BOS Volume 01.06.

ASTM A957/A957M - Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use has been revised to A957/A957M-18 developed by Committee A01.18, ASTM BOS Volume 01.02.

ASTM A985/A985M - Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts has been revised to A985/A985M-18 developed by Committee A01.18, ASTM BOS Volume 01.02.

ASTM C1802 - Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures has been revised to C1802-18 developed by Committee C27.10, ASTM BOS Volume 04.05.

ASTM D2172/D2172M - Standard Test Methods for Quantitative Extraction of Asphalt Binder from Asphalt Mixtures has been editorially changed, available as D2172/D2172M-17e1 developed by Committee D04.25, ASTM BOS Volume 04.03.

ASTM D2700 - Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel has been revised to D2700-18 developed by Committee D02.01, ASTM BOS Volume 05.05.

ASTM D3712 - Standard Test Method of Analysis of Oil-Soluble Sulfonates by Liquid Chromatography has been revised (with title change) to D3712-18 developed by Committee D02.04.0C, ASTM BOS Volume 05.02.

ASTM D4273 - Standard Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols has been revised to D4273-18 developed by Committee D20.22, ASTM BOS Volume 08.02.

ASTM D4391 - Standard Terminology Relating to The Burning Behavior of Textiles has been revised to D4391-18 developed by Committee D13.92, ASTM BOS Volume 07.01.

ASTM D4754 - Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell has been revised to D4754-18 developed by Committee D20.70, ASTM BOS Volume 08.03.

ASTM D4870 - Standard Test Method for Determination of Total Sediment in Residual Fuels has been revised to D4870-18 developed by Committee D02.14, ASTM BOS Volume 05.02.

ASTM D4875 - Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols has been revised to D4875-18 developed by Committee D20.22, ASTM BOS Volume 08.02.

ASTM D5305 - Standard Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor has been revised to D5305-18 developed by Committee D02.H0, ASTM BOS Volume 05.02.

ASTM D6951/D6951M - Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications has been revised to D6951/D6951M-18 developed by Committee E17.41, ASTM BOS Volume 04.03.

ASTM D7430 - Standard Practice for Mechanical Sampling of Coal has been revised to D7430-18a developed by Committee D05.23, ASTM BOS Volume 05.06.

ASTM D787 - Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds has been revised to D787-18 developed by Committee D20.15, ASTM BOS Volume 08.01.

ASTM D8196 - Standard Practice for Determination of Water Activity (aw) in Cannabis Flower is a new standard, now available. D8196-18 developed by Committee D37.04, ASTM BOS Volume 15.10.

ASTM D8197 - Standard Specification for Maintaining Acceptable Water Activity (aw) Range (0.55 to 0.65) for Dry Cannabis Flower is a new standard, now available. D8197-18 developed by Committee D37.04, ASTM BOS Volume 15.10.

ASTM E2180 - Standard Test Method for Determining the Activity of Incorporated Antimicrobial Agent(s) In Polymeric or Hydrophobic Materials has been revised to E2180-18 developed by Committee E35.15, ASTM BOS Volume 11.08.

ASTM E2271/E2271M - Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Multifamily Dwellings has been revised (with title change) to E2271/E2271M-18 developed by Committee E06.23, ASTM BOS Volume 04.12.

ASTM E3092 - Standard Practice for Evaluating Efficacy of Vaporous Decontaminants on Materials Contaminated with Bacillus Spores and Contained Within 0.2µm Filter-Capped Tubes is a new standard, now available. E3092-18 developed by Committee E35.15, ASTM BOS Volume 11.08.

ASTM E3151 - Standard Test Method for Determining Antimicrobial Activity and Biofilm Resistance Properties of Tube, Yarn, or Fiber Specimens is a new standard, now available. E3151-18 developed by Committee E35.15, ASTM BOS Volume 11.08.

ASTM F1669M - Standard Specification for Insulation Monitors for Shipboard Electrical Systems [Metric] has been reapproved, available as F1669M-12(2018) developed by Committee F25.10, ASTM BOS Volume 01.08.

ASTM F3040/F3040M - Standard Test Method for Mechanical Static Load Testing of Non-Structural Marine Joiner Bulkheads has been reapproved, available as F3040/F3040M-13(2018) developed by Committee F25.03, ASTM BOS Volume 01.08.

ASTM F3066/F3066M - Standard Specification for Aircraft Powerplant Installation Hazard Mitigation has been revised to F3066/F3066M-18 developed by Committee F44.40, ASTM BOS Volume 15.11.

ASTM F3174/F3174M - Standard Specification for Establishing Operating Limitations and Information for Aeroplanes has been revised to F3174/F3174M-18 developed by Committee F44.20, ASTM BOS Volume 15.11.

ASTM F3200 - Standard Terminology for Driverless Automatic Guided Industrial Vehicles has been revised to F3200-18a developed by Committee F45.91, ASTM BOS Volume 15.08.

ASTM F3298 - Standard Specification for Design, Construction, and Verification of Fixed-Wing Unmanned Aircraft Systems (UAS) is a new standard, now available. F3298-18 developed by Committee F38.01, ASTM BOS Volume 15.11.

Liên hệ với TechDoc để được hỗ trợ:

Dự thảo Tiêu chuẩn Hoa Kỳ ASTM đang xây dựng

ASTM WK63528 - Standard Test Method for Raveling Test of Cold Mixed Emulsified Asphalt Samples is a work item revision to existing standard D7196-16

ASTM WK63529 - Standard Consumer Safety Specification for Lighters is a work item revision to existing standard F400-10

ASTM WK63530 - Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation is a work item revision to existing standard C647-08(2013)

ASTM WK63531 - Standard Specification for Refined Lead is a work item revision to existing standard B29-14

ASTM WK63537 - Standard Practice for In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux Transducers is a work item revision to existing standard C1041-10

ASTM WK63538 -Test Method for Test Method For Measurement of Time Of Wetness

ASTM WK63539 - Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings is a work item revision to existing standard D6762-02a(2017)

ASTM WK63540 -Guide for Infrastructure Management Guide

ASTM WK63541 - Standard Specification for Mineral Fiber Pipe Insulation is a work item revision to existing standard C547-17

ASTM WK63543 - Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range is a work item revision to existing standard A962/A962M-17

ASTM WK63544 - Standard Test Methods for Tension Testing of Metallic Materials is a work item revision to existing standard E8/E8M-16a

ASTM WK63545 - Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Linersis a work item revision to existing standard D5890-11

ASTM WK63547 - Standard Specification for Combination Oven Electric or Gas Fired is a work item revision to existing standard F1495-14a

ASTM WK63548 - Standard Specification for Convection Oven Gas or Electric is a work item revision to existing standard F2092-14

ASTM WK63549 - Standard Specification for Heavy-Duty Ranges, Gas and Electric is a work item revision to existing standard F2521-09(2014)

ASTM WK63550 - Standard Specification for Hot Food Holding Tables is a work item revision to existing standard F2796-09(2014)

ASTM WK63551 - Standard Classification for Determination of Impact Insulation Class (IIC) is a work item revision to existing standard E989-06(2012)

ASTM WK63553 - Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction is a work item revision to existing standard B101-12

ASTM WK63554 - Standard Specification for Copper Sheet and Strip for Building Construction is a work item revision to existing standard B370-12

ASTM WK63555 - Standard Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical Heating is a work item revision to existing standard B70-90(2013)

ASTM WK63559 - Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating is a work item revision to existing standard B78-90(2013)

ASTM WK63560 - Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors is a work item revision to existing standard B84-07(2013)

ASTM WK63561 - Standard Test Methods for Flexivity of Thermostat Metals is a work item revision to existing standard B106-08(2013)

ASTM WK63565 - Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System is a work item revision to existing standard F1977-04(2017)

ASTM WK63566 - Standard Specification for Seamless Copper Tube is a work item revision to existing standard B75/B75M-11

ASTM WK63574 - Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel is a work item revision to existing standard A510/A510M-18

ASTM WK63577 - Standard Terminology Relating to Non-ferrous Metals and Alloys is a work item revision to existing standard B899-16

ASTM WK63583 - Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials is a work item revision to existing standard C1304-08(2013)

ASTM WK63584 - Standard Test Method for Water Absorption of Rigid Cellular Plastics is a work item revision to existing standard D2842-12

ASTM WK63585 - Standard Test Method for Windload Resistance of Rigid Plastic Siding is a work item revision to existing standard D5206-13

ASTM WK63586 - Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography is a work item revision to existing standard D2163-14e1

ASTM WK63587 - Standard Specification for Polypropylene (PP) Siding is a work item revision to existing standard D7254-17

ASTM WK63588 - Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors is a work item revision to existing standard D7192-10

ASTM WK63589 - Standard Specification for Ultra-High Molecular Weight Polyethylene Powder Blended With Alpha-Tocopherol (Vitamin E) and Fabricated Forms for Surgical Implant Applications is a work item revision to existing standard F2695-12

ASTM WK63590 - Standard Test Method for Measurement of Fracture Toughness is a work item revision to existing standard E1820-17a

ASTM WK63591 - Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions is a work item revision to existing standard E2472-12e1

ASTM WK63594 - Standard Guide for Use of Activity and Use Limitations, Including Institutional and Engineering Controls is a work item revision to existing standard E2091-17

ASTM WK63596 - Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation is a work item revision to existing standard C1374-14

ASTM WK63598 -Specification for New Specification for Standard Practice for Ultrasonic Detection of Meso Inclusions in Steel

ASTM WK63599 - Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement is a work item revision to existing standard E398-13

ASTM WK63600 - Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors is a work item revision to existing standard F2622-08(2013)

ASTM WK63601 - Standard Test Method for Determining the Antimicrobial Activity of Antimicrobial Agents Under Dynamic Contact Conditions is a work item revision to existing standard E2149-13a

ASTM WK63602 -Test Methods for Bend Tests for Adhesion of Metallic Coatings

ASTM WK63606 - Standard Specification for Structural Carbon Steel Plates of Improved Toughness is a work item revision to existing standard A573/A573M-13

Liên hệ với TechDoc để được hỗ trợ: