Tra cứu tất cả các loại tiêu chuẩn.

ASTM A34/A34M - Standard Practice for Sampling and Procurement Testing of Magnetic Materials has been reapproved, available as A34/A34M-06(2018) developed by Committee A06.01, ASTM BOS Volume 03.07.

ASTM A697/A697M - Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods has been reapproved, available as A697/A697M-13(2018) developed by Committee A06.01, ASTM BOS Volume 03.07.

ASTM A717/A717M - Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens has been reapproved, available as A717/A717M-12(2018) developed by Committee A06.01, ASTM BOS Volume 03.07.

ASTM A781/A781M - Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use has been revised to A781/A781M-18b developed by Committee A01.18, ASTM BOS Volume 01.02.

ASTM A951/A951M - Standard Specification for Steel Wire for Masonry Joint Reinforcement has been editorially changed, available as A951/A951M-16e1 developed by Committee A01.05, ASTM BOS Volume 01.04.

ASTM B108/B108M - Standard Specification for Aluminum-Alloy Permanent Mold Castings has been revised to B108/B108M-18 developed by Committee B07.01, ASTM BOS Volume 02.02.

ASTM B183 - Standard Practice for Preparation of Low-Carbon Steel for Electroplating has been revised to B183-18 developed by Committee B08.02, ASTM BOS Volume 02.05.

ASTM B618/B618M - Standard Specification for Aluminum-Alloy Investment Castings has been revised to B618/B618M-18 developed by Committee B07.01, ASTM BOS Volume 02.02.

ASTM C114 - Standard Test Methods for Chemical Analysis of Hydraulic Cement has been revised to C114-18 developed by Committee C01.23, ASTM BOS Volume 04.01.

ASTM C497 - Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile has been revised to C497-18a developed by Committee C13.09, ASTM BOS Volume 04.05.

ASTM D2992 - Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings has been revised to D2992-18 developed by Committee D20.23, ASTM BOS Volume 08.03.

ASTM D3481 - Standard Test Method for Manual Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions (Withdrawn 2018) has been withdrawn, with no replacement. D3481- developed by Committee F02.25, ASTM BOS Volume 15.10.

ASTM D4328 - Standard Practice for Calculation of Supersaturation of Barium Sulfate, Strontium Sulfate, and Calcium Sulfate Dihydrate (Gypsum) in Brackish Water, Seawater, and Brines has been revised to D4328-18 developed by Committee D19.05, ASTM BOS Volume 11.02.

ASTM D4438 - Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting has been reapproved (with editorial change), available as D4438-13(2018)e1 developed by Committee D32.02, ASTM BOS Volume 05.06.

ASTM D4512 - Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder has been reapproved (with editorial change), available as D4512-03(2018)e1 developed by Committee D32.02, ASTM BOS Volume 05.06.

ASTM D4699 - Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles has been reapproved (with editorial change), available as D4699-03(2018)e1 developed by Committee D32.02, ASTM BOS Volume 05.06.

ASTM D4781 - Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles has been reapproved (with editorial change), available as D4781-03(2018)e1 developed by Committee D32.02, ASTM BOS Volume 05.06.

ASTM D7257 - Standard Test Method for Automated Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions (Withdrawn 2018) has been withdrawn, with no replacement. D7257- developed by Committee F02.25, ASTM BOS Volume 15.10.

ASTM D7547 - Standard Specification for Hydrocarbon Unleaded Aviation Gasoline has been revised to D7547-18 developed by Committee D02.J0.02, ASTM BOS Volume 05.04.

ASTM D7826 - Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives has been revised to D7826-18 developed by Committee D02.J0.02, ASTM BOS Volume 05.05.

ASTM E2177 - Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Wetness has been revised to E2177-18 developed by Committee E12.10, ASTM BOS Volume 06.01.

ASTM E2734/E2734M - Standard Specification for Dimensions of Knife-Edge Flanges has been reapproved, available as E2734/E2734M-10(2018) developed by Committee E42.13, ASTM BOS Volume 03.06.

ASTM E3159 - Standard Guide for General Reliability is a new standard, now available. E3159-18 developed by Committee E11.40, ASTM BOS Volume 14.05.

ASTM F1193 - Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Deviceshas been revised to F1193-18 developed by Committee F24.24, ASTM BOS Volume 15.07.

ASTM F2193 - Standard Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System has been revised to F2193-18a developed by Committee F04.25, ASTM BOS Volume 13.01.

ASTM F2706 - Standard Test Methods for Occipital-Cervical and Occipital-Cervical-Thoracic Spinal Implant Constructs in a Vertebrectomy Model has been revised to F2706-18 developed by Committee F04.25, ASTM BOS Volume 13.02.

ASTM F3285 - Standard Guide for Installation and Application of Type C Portable Tanks for Marine LNG Service is a new standard, now available. F3285-18 developed by Committee F25.11, ASTM BOS Volume 01.07.

ASTM F3316/F3316M - Standard Specification for Electrical Systems for Aircraft with Electric or Hybrid-Electric Propulsion is a new standard, now available. F3316/F3316M-18 developed by Committee F44.50, ASTM BOS Volume 15.11.

Liên hệ với TechDoc để được hỗ trợ:

Dự thảo Tiêu chuẩn Hoa Kỳ ASTM đang xây dựng

ASTM WK63766 - Standard Test Method for Evaluation of MR Image Artifacts from Passive Implants is a work item revision to existing standard F2119-07(2013)

ASTM WK63784 -Test Method for Determining Concentration of Ortho-Phthalates in Resilient Flooring

ASTM WK63785 - Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors is a work item revision to existing standard B258-14

ASTM WK63786 - Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors is a work item revision to existing standard B258-14

ASTM WK63787 - Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe and Tube is a work item revision to existing standard B167-11(2016)

ASTM WK63789 - Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board is a work item revision to existing standard C1289-17

ASTM WK63790 - Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube is a work item revision to existing standard B829-04a(2017)

ASTM WK63791 -Guide for Body Armor Program Management

ASTM WK63792 - Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners is a work item revision to existing standard F2282-15

ASTM WK63793 -Specification for Titanium Alloy Bars for Near Surface Mounts in Civil Structures

ASTM WK63794 - Standard Practice for Abrading Concrete is a work item revision to existing standard D4259-88(2012)

ASTM WK63806 -Guide for Developing and Validating D19 Chemical Analysis Methods intended for EPA compliance reporting

ASTM WK63807 - Standard Specification for Load-Indicating Externally Threaded Fasteners is a work item revision to existing standard F2482-08(2015)

ASTM WK63808 - Standard Tables of Body Measurements for Boys, Sizes 4H to 20H Husky is a work item revision to existing standard D6860/D6860M-13

ASTM WK63809 - Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications is a work item revision to existing standard F2989-13

ASTM WK63810 - Standard Terminology Relating to Uninsulated Metallic Electrical Conductors is a work item revision to existing standard B354-16

ASTM WK63812 - Standard Test Method for Cetane Number of Diesel Fuel Oil is a work item revision to existing standard D613-18

ASTM WK63813 - Standard Tables of Body Measurements for Girls, Sizes 2 to 20 (Reg & Slim) and Girls Plus is a work item revision to existing standard D6192-11

ASTM WK63814 - Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding is a work item revision to existing standard A514/A514M-14

ASTM WK63815 - Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance is a work item revision to existing standard A871/A871M-14

ASTM WK63816 - Standard Test Method for Acidity in Acrylonitrile is a work item revision to existing standard E1788-16

ASTM WK63817 - Standard Test Method for Analysis of Acrylonitrile by Gas Chromatography (Withdrawn 2016) is a work item for the reinstatement of the withdrawn standard E1863-07

ASTM WK63818 - Standard Specification for Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70 % Glycolide is a work item revision to existing standard F2313-10

ASTM WK63819 - Standard Test Method for Calibration and Accuracy Verification of Wideband Infrared Thermometers is a work item revision to existing standard E2847-14

ASTM WK63820 - Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry is a work item revision to existing standard D6349-13

ASTM WK63821 - Standard Specification for Amorphous Poly(lactide) and Poly(lactide-co-glycolide) Resins for Surgical Implants is a work item revision to existing standard F2579-10

ASTM WK63822 - Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues is a work item revision to existing standard D7348-13

ASTM WK63825 - Standard Test Methods for Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests (Withdrawn 2017) is a work item for the reinstatement of the withdrawn standard D7401-08

ASTM WK63826 - Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants is a work item revision to existing standard F1925-17

ASTM WK63828 - Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method is a work item revision to existing standard D6758-18

ASTM WK63829 - Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants is a work item revision to existing standard F1925-17

ASTM WK63830 - Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants is a work item revision to existing standard F1925-17

ASTM WK63831 - Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants is a work item revision to existing standard F1925-17

ASTM WK63833 -Guide for In-Plane Biaxial Testing with Cruciform Type Specimens

ASTM WK63834 - Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings is a work item revision to existing standard A484/A484M-18

Liên hệ với TechDoc để được hỗ trợ: