Tra cứu tất cả các loại tiêu chuẩn.

ASTM A1033 - Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations has been revised to A1033-18 developed by Committee A01.13, ASTM BOS Volume 01.03.

ASTM A489 - Standard Specification for Carbon Steel Eyebolts has been editorially changed, available as A489-18e1 developed by Committee F16.02, ASTM BOS Volume 01.09.

ASTM A902 - Standard Terminology Relating to Metallic Coated Steel Products has been revised to A902-18 developed by Committee A05.18, ASTM BOS Volume 01.06.

ASTM A90/A90M - Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings has been reapproved, available as A90/A90M-13(2018) developed by Committee A05.07, ASTM BOS Volume 01.06.

ASTM C476 - Standard Specification for Grout for Masonryhas been revised to C476-18 developed by Committee C12.05, ASTM BOS Volume 04.05.

ASTM C515 - Standard Specification for Chemical-Resistant Ceramic Tower Packings has been reapproved, available as C515-13(2018) developed by Committee D32.02, ASTM BOS Volume 05.06.

ASTM D3268 - Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method) has been reapproved, available as D3268-91(2018) developed by Committee D22.03, ASTM BOS Volume 11.07.

ASTM D3375 - Standard Test Method for Column Capacity of Particulate Mixed Bed IonExchange Materials has been revised to D3375-18 developed by Committee D19.08, ASTM BOS Volume 11.02.

ASTM D3505 - Standard Test Method for Density or Relative Density of Pure Liquid Chemicals has been revised to D3505-18 developed by Committee D16.04, ASTM BOS Volume 06.04.

ASTM D4382 - Standard Test Method for Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace has been revised to D4382-18 developed by Committee D19.05, ASTM BOS Volume 11.01.

ASTM D6328 - Standard Guide for Quality Assurance Protocols for Chemical Analysis of Atmospheric Wet Deposition has been revised to D6328-18 developed by Committee D22.03, ASTM BOS Volume 11.07.

ASTM D6831 - Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance has been reapproved, available as D6831-11(2018) developed by Committee D22.03, ASTM BOS Volume 11.07.

ASTM D7084 - Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriershas been revised to D7084-18 developed by Committee D32.02, ASTM BOS Volume 05.06.

ASTM D8063 - Standard Test Method for Water in Purified Terephthalic Acid (PTA) by Volumetric Karl Fischer Titration is a new standard, now available. D8063-18 developed by Committee D16.02, ASTM BOS Volume 06.04.

ASTM E2776 - Standard Guide for Correlation of Results of Solid Particle Size Measurement Instruments is a new standard, now available. E2776-18 developed by Committee E29.02, ASTM BOS Volume 14.02.

ASTM E2890 - Standard Test Method for Kinetic Parameters for Thermally Unstable Materials by Differential Scanning Calorimetry Using the Kissinger Method has been reapproved, available as E2890-12(2018) developed by Committee E37.01, ASTM BOS Volume 14.05.

ASTM E344 - Terminology Relating to Thermometry and Hydrometry has been revised to E344-18 developed by Committee E20.91, ASTM BOS Volume 14.03.

ASTM E963 - Standard Practice for Electrolytic Extraction of Phases from Ni and Ni-Fe Base Superalloys Using a Hydrochloric-Methanol Electrolyte (Withdrawn 2018)has been withdrawn, with no replacement. E963- developed by Committee E04.11, ASTM BOS Volume 03.01.

ASTM F2012 - Standard Consumer Safety Performance Specification for Stationary Activity Centers has been editorially changed, available as F2012-18e1 developed by Committee F15.17, ASTM BOS Volume 15.11.

ASTM F2084/F2084M - Standard Guide for Collecting Containment Boom Performance Data in Controlled Environments has been reapproved, available as F2084/F2084M-01(2018) developed by Committee F20.11, ASTM BOS Volume 11.08.

ASTM F2682 - Standard Guide for Determining the Buoyancy to Weight Ratio of Oil Spill Containment Boom has been reapproved, available as F2682-07(2018) developed by Committee F20.11, ASTM BOS Volume 11.08.

ASTM F2798 - Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applicationshas been reapproved, available as F2798-09(2018) developed by Committee F25.11, ASTM BOS Volume 01.08.

ASTM F3293 - Standard Guide for Application of Test Soils for the Validation of Cleaning Methods for Reusable Medical Devices is a new standard, now available. F3293-18 developed by Committee F04.15, ASTM BOS Volume 13.02.

Vui lòng liên hệ với TechDoc: 

Dự thảo Tiêu chuẩn Hoa Kỳ ASTM đang xây dựng

ASTM WK63497 - Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics is a work item revision to existing standard D5262-07(2016)

ASTM WK63498 - Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry is a work item revision to existing standard E1349-06(2013)

ASTM WK63502 - Standard Test Method for Specular Glossis a work item revision to existing standard D523-14(2018)

ASTM WK63503 - Standard Consumer Safety Specification for Infant and Infant/Toddler Rockers is a work item revision to existing standard F3084-16

ASTM WK63504 - Standard Consumer Safety Specification for Infant Swings is a work item revision to existing standard F2088-15

ASTM WK63505 - Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits is a work item revision to existing standard B841-99(2010)

ASTM WK63506 -Specification for Infant Bathers

ASTM WK63507 -Guide for Best Practices for Process Monitoring Instrumentation in Pharmaceutical Freeze Drying

ASTM WK63508 - Standard Test Method for Determination of Phosphorus in Nickel, Ferronickel, and Nickel Alloys by Phosphovanadomolybdate Spectrophotometry is a work item revision to existing standard E1917-13

ASTM WK63509 - Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry is a work item revision to existing standard E1938-13

ASTM WK63512 -Practice for Describing the SI Traceability of Night Vision Goggle Gain

ASTM WK63513 - Standard Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring is a work item revision to existing standard F150-06(2013)

ASTM WK63516 -Test Method for Standard Test Method for Measurement of Fresh Hydraulic Cement Paste Spread Using a Mini-Slump Cone

ASTM WK63518 - Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ISO Methods is a work item revision to existing standard D6358-11

ASTM WK63522 - Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems is a work item revision to existing standard F645-18a

ASTM WK63523 - Standard Terminology for Copper and Copper Alloys is a work item revision to existing standard B846-11a

ASTM WK63524 - Standard Terminology for Copper and Copper Alloys is a work item revision to existing standard B846-11a

ASTM WK63525 - Standard Terminology for Copper and Copper Alloys is a work item revision to existing standard B846-11a

ASTM WK63526 - Standard Terminology for Copper and Copper Alloys is a work item revision to existing standard B846-11a

ASTM WK63527 - Standard Test Method for Compression Resistance of a Container Under Constant Load is a work item revision to existing standard D4577-05(2010)

Vui lòng liên hệ với TechDoc: