Tra cứu tất cả các loại tiêu chuẩn.

Tiêu chuẩn Hoa Kỳ ASTM mới ban hành

ASTM A510/A510M - Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel has been revised to A510/A510M-18 developed by Committee A01.03, ASTM BOS Volume 01.03.

ASTM B249/B249M - Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings has been revised to B249/B249M-18 developed by Committee B05.02, ASTM BOS Volume 02.01.

ASTM B283/B283M - Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed) has been revised to B283/B283M-18 developed by Committee B05.02, ASTM BOS Volume 02.01.

ASTM B395/B395M - Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes has been revised to B395/B395M-18 developed by Committee B05.04, ASTM BOS Volume 02.01.

ASTM B967/B967M - Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire has been revised to B967/B967M-18 developed by Committee B05.02, ASTM BOS Volume 02.01.

ASTM D3241 - Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels has been revised to D3241-18 developed by Committee D02.J0.03, ASTM BOS Volume 05.01.

ASTM D7412 - Standard Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry has been revised to D7412-18 developed by Committee D02.96.03, ASTM BOS Volume 05.04.

ASTM D7414 - Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometryhas been revised to D7414-18 developed by Committee D02.96.03, ASTM BOS Volume 05.04.

ASTM D7415 - Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry has been revised to D7415-18 developed by Committee D02.96.03, ASTM BOS Volume 05.04.

ASTM D7844 - Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry has been revised to D7844-18 developed by Committee D02.96.03, ASTM BOS Volume 05.05.

ASTM E119 - Standard Test Methods for Fire Tests of Building Construction and Materials has been revised to E119-18 developed by Committee E05.11, ASTM BOS Volume 04.07.

ASTM E3027 - Standard Guide for Making Sustainability-Related Chemical Selection Decisions in the Life-Cycle of Products has been revised to E3027-18 developed by Committee E60.80, ASTM BOS Volume 04.12.

ASTM E3111/E3111M - Standard Test Method for Ballistic Resistant Head Protection is a new standard, now available. E3111/E3111M-18 developed by Committee E54.04, ASTM BOS Volume 15.08.

ASTM E3123 - Standard Guide for Recognition and Derecognition of Environmental Liabilities has been revised to E3123-18 developed by Committee E50.05, ASTM BOS Volume 11.05.

ASTM F1430/F1430M - Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments has been revised to F1430/F1430M-18 developed by Committee F18.55, ASTM BOS Volume 10.03.

ASTM F3300 - Standard Test Method for Abrasion Resistance of Flexible Packaging Films Using a Reciprocating Weighted Stylus is a new standard, now available. F3300-18 developed by Committee F02.20, ASTM BOS Volume 15.10.

ASTM F914/F914M - Standard Test Method for Acoustic Emission for Aerial Personnel Devices Without Supplemental Load Handling Attachments has been revised to F914/F914M-18 developed by Committee F18.55, ASTM BOS Volume 10.03.

ASTM F994 - Standard Specification for Design and Installation of Overboard Discharge Hull Penetration Connections has been reapproved, available as F994-86(2018) developed by Committee F25.11, ASTM BOS Volume 01.07.

ASTM F998 - Standard Specification for Centrifugal Pump, Shipboard Use has been reapproved, available as F998-12(2018) developed by Committee F25.11, ASTM BOS Volume 01.07.

Vui lòng liên hệ với TechDoc:

Dự thảo Tiêu chuẩn Hoa Kỳ ASTM 

ASTM WK62905 - Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection is a work item revision to existing standard D1970/D1970M-17a

ASTM WK62906 - Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution is a work item revision to existing standard C1012/C1012M-18a

ASTM WK62907 - Standard Practice for Computing the Colors of Objects by Using the CIE System is a work item revision to existing standard E308-17

ASTM WK62908 - Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates is a work item revision to existing standard D4661-13

ASTM WK62909 - Standard Practice for Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systemsis a work item revision to existing standard F2831-12(2017)

ASTM WK62910 - Standard Practice for Polyurethane Raw Materials: Polyurethane Foam Cup Test is a work item revision to existing standard D7487-13e1

ASTM WK62911 - Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate is a work item revision to existing standard D4660-12

ASTM WK62912 - Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates is a work item revision to existing standard D6099-13

ASTM WK62913 - Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates is a work item revision to existing standard D6099-13

ASTM WK62914 - Standard Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades is a work item revision to existing standard C1496-11

ASTM WK62915 - Standard Methods for Testing Hydraulic Spray Nozzles Used in Agriculture is a work item revision to existing standard E641-01(2012)e1

ASTM WK62916 - Standard Practice for Maintenance, Renovation and Repair of Installed Asbestos Cement Products is a work item revision to existing standard E2394-11

ASTM WK62917 - Standard Terminology Relating to Hydraulic Cement is a work item revision to existing standard C219-14a

ASTM WK62918 - Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection is a work item for the withdrawal of the existing standard D6920-13

ASTM WK62919 - Standard Practice for the Installation of Self-Leveling Underlayment and the Preparation of Surface to Receive Resilient Flooring is a work item revision to existing standard F2873-13

ASTM WK62922 - Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions is a work item revision to existing standard D5313/D5313M-12(2013)

ASTM WK62926 - Standard Practice for Asbestos Detection Limit Based on Counts is a work item revision to existing standard D6620-06(2010)

ASTM WK62927 - Standard Test Method for Odor and Taste Transfer from Polymeric Packaging Film is a work item revision to existing standard E1870-11

ASTM ASTM WK62928 -Guide for Standard Guide for Geomembrane Design and Installation at Hydraulic Fracture Development Sites

ASTM WK62929 - Standard Guide for Limiting Water-Induced Damage to Buildings is a work item revision to existing standard E241-09(2014)e1

ASTM WK62930 - Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide is a work item revision to existing standard C288-87(2014)

ASTM WK62931 - Standard Guide for Limiting Water-Induced Damage to Buildings is a work item revision to existing standard E241-09(2014)e1

ASTM WK62932 - Standard Guide for Limiting Water-Induced Damage to Buildings is a work item revision to existing standard E241-09(2014)e1

ASTM WK62933 - Standard Guide for Limiting Water-Induced Damage to Buildings is a work item revision to existing standard E241-09(2014)e1

ASTM WK62934 - Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems is a work item revision to existing standard E1825-17

ASTM WK62935 - Standard Test Method for Evaluation of Hygienic Handwash and Handrub Formulations for Virus-Eliminating Activity Using the Entire Hand is a work item revision to existing standard E2011-13

ASTM WK62936 - Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonics is a work item revision to existing standard E2223-13

ASTM WK62937 - Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter) is a work item revision to existing standard D7417-17

ASTM WK62938 - Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection is a work item revision to existing standard D1970/D1970M-17a

Vui lòng liên hệ với TechDoc: