Tra cứu tất cả các loại tiêu chuẩn.

Tiêu chuẩn Hoa Kỳ ASTM mới ban hành

ASTM B657 - Standard Guide for Metallographic Identification of Microstructure in Cemented Carbides has been revised to B657-18 developed by Committee B09.06, ASTM BOS Volume 02.05.

ASTM C1063 - Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster has been revised to C1063-18 developed by Committee C11.03, ASTM BOS Volume 04.01.

ASTM C1365 - Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis has been revised to C1365-18 developed by Committee C01.23, ASTM BOS Volume 04.01.

ASTM C76 - Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe has been revised to C76-18 developed by Committee C13.02, ASTM BOS Volume 04.05.

ASTM C76M - Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric) has been revised to C76M-18 developed by Committee C13.02, ASTM BOS Volume 04.05.

ASTM D1322 - Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel has been revised to D1322-18 developed by Committee D02.J0.03, ASTM BOS Volume 05.01.

ASTM D1921 - Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials has been revised to D1921-18 developed by Committee D20.70, ASTM BOS Volume 08.01.

ASTM D2157 - Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases from Burning Distillate Fuels has been revised to D2157-18 developed by Committee D02.E0, ASTM BOS Volume 05.01.

ASTM D2978 - Standard Test Methods for Volume of Processed Peat Materials has been editorially changed, available as D2978-15e1 developed by Committee D18.22, ASTM BOS Volume 04.08.

ASTM D2980 - Standard Test Method for Saturated Density, Moisture-Holding Capacity, and Porosity of Saturated Peat Materials has been editorially changed, available as D2980-17e1 developed by Committee D18.22, ASTM BOS Volume 04.08.

ASTM D4803 - Standard Test Method for Predicting Heat Buildup in PVC Building Products has been reapproved (with editorial change), available as D4803-10(2018)e1 developed by Committee D20.24, ASTM BOS Volume 08.03.

ASTM D5883 - Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes has been editorially changed, available as D5883-12e1 developed by Committee D18.22, ASTM BOS Volume 04.09.

ASTM D5918 - Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils has been editorially changed, available as D5918-13e1 developed by Committee D18.19, ASTM BOS Volume 04.09.

ASTM D6138 - Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)has been revised to D6138-18 developed by Committee D02.G0.06, ASTM BOS Volume 05.03.

ASTM D6449 - Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method) has been editorially changed, available as D6449-99(2015)e1 developed by Committee D18.25, ASTM BOS Volume 04.09.

ASTM D6599 - Standard Practice for Construction of Live Fascines on Slopes has been editorially changed, available as D6599-00(2014)e2 developed by Committee D18.25, ASTM BOS Volume 04.09.

ASTM D6750 - Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur) has been revised to D6750-18 developed by Committee D02.B0.02, ASTM BOS Volume 05.03.

ASTM D6825 - Standard Guide for Placement of Riprap Revetments has been editorially changed, available as D6825-14e1 developed by Committee D18.17, ASTM BOS Volume 04.09.

ASTM D6984 - Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine has been revised to D6984-18 developed by Committee D02.B0.01, ASTM BOS Volume 05.04.

ASTM D7101 - Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions has been editorially changed, available as D7101-13e1 developed by Committee D18.25, ASTM BOS Volume 04.09.

ASTM D7208 - Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosionhas been editorially changed, available as D7208-14e1 developed by Committee D18.25, ASTM BOS Volume 04.09.

ASTM D7566 - Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons has been revised to D7566-18 developed by Committee D02.J0.06, ASTM BOS Volume 05.04.

ASTM D8076 - Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines has been revised to D8076-18 developed by Committee D02.A0.01, ASTM BOS Volume 05.05.

ASTM D975 - Standard Specification for Diesel Fuel Oils has been revised to D975-18 developed by Committee D02.E0, ASTM BOS Volume 05.01.

ASTM E1262 - Standard Guide for Performance of Chinese Hamster Ovary Cell/Hypoxanthine Guanine Phosphoribosyl Transferase Gene Mutation Assay has been reapproved, available as E1262-88(2018) developed by Committee F04.16, ASTM BOS Volume 13.01.

ASTM E2554 - Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques has been revised to E2554-18 developed by Committee E11.20, ASTM BOS Volume 14.05.

ASTM E2706 - Standard Practice for Equipment Technology and Operations for Mobile and Plant-Based Secure Destruction Safety Requirements is a new standard, now available. E2706-18 developed by Committee E34.10, ASTM BOS Volume 11.03.

ASTM E2708 - Standard Terminology for Accreditation and Certification has been revised to E2708-18 developed by Committee E36.95, ASTM BOS Volume 14.02.

ASTM E2825 - Standard Guide for Forensic Digital Image Processing has been revised to E2825-18 developed by Committee E30.12, ASTM BOS Volume 14.02.

ASTM F1099M - Standard Specification for Rat Guards, Ship’s (Metric) has been revised to F1099M-18 developed by Committee F25.07, ASTM BOS Volume 01.07.

ASTM F1734 - Standard Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe (Withdrawn 2018) has been withdrawn, with no replacement. F1734- developed by Committee F17.60, ASTM BOS Volume 08.04.

ASTM F2093 - Standard Test Method for Performance of Rack Ovens has been revised to F2093-18 developed by Committee F26.06, ASTM BOS Volume 15.12.

ASTM F2159 - Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubinghas been revised to F2159-18 developed by Committee F17.10, ASTM BOS Volume 08.04.

ASTM F2926 - Standard Guide for Selection and Operation of Vessel-mounted Camera Systems has been revised to F2926-18 developed by Committee F20.16, ASTM BOS Volume 11.08.

ASTM F2935 - Standard Specification for Chocks, Panama, Mooring Cast Steel has been reapproved (with editorial change), available as F2935-12(2018)e1 developed by Committee F25.01, ASTM BOS Volume 01.08.

ASTM F3054 - Standard Practice for Operations of Amusement Railway Rides, Devices, and Facilities has been revised to F3054-18 developed by Committee F24.60, ASTM BOS Volume 15.07.

ASTM F565 - Standard Practice for Care and Handling of Orthopedic Implants and Instruments has been reapproved, available as F565-04(2018) developed by Committee F04.21, ASTM BOS Volume 13.01.

ASTM F877 - Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems has been revised to F877-18 developed by Committee F17.61, ASTM BOS Volume 08.04.

ASTM F983 - Standard Practice for Permanent Marking of Orthopaedic Implant Components has been reapproved, available as F983-86(2018) developed by Committee F04.21, ASTM BOS Volume 13.01. 

Vui lòng liên hệ với TechDoc: 

Dự thảo Tiêu chuẩn Hoa Kỳ ASTM đang xây dựng

ASTM WK63160 - is a work item revision to existing standard

ASTM WK63161 - Standard Terminology for Body Armor is a work item revision to existing standard E3005-15

ASTM WK63163 - Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications is a work item revision to existing standard E29-13

ASTM WK63164 - Standard Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample is a work item revision to existing standard E2334-09(2013)e2

ASTM WK63165 - Standard Specification for Design of Weight-Shift-Control Aircraft is a work item revision to existing standard F2317/F2317M-16a

ASTM WK63166 -Guide for Selection of Real-Time and Near Real-Time Mass Spectrometer-Based Technologies for Online Measurements of Volatile Organic Compounds in Ambient Air

ASTM WK63167 -Practice for Heat Fusion Joining of Polyamide-12 (PA12) Pipe and Fittings

ASTM WK63170 - Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe is a work item revision to existing standard F894-13

ASTM WK63171 - Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens is a work item revision to existing standard G1-03(2017)e1

ASTM WK63173 - Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes is a work item revision to existing standard A312/A312M-17

ASTM WK63174 - Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications is a work item revision to existing standard A358/A358M-15

ASTM WK63175 - Standard Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast is a work item revision to existing standard B601-18

ASTM WK63176 - Standard Specification for Prime Western Grade-Recycled (PWG-R) Zinc is a work item revision to existing standard B960-13

ASTM WK63177 - Standard Specification for General Requirements for Zinc and Zinc Alloy Products is a work item revision to existing standard B949-13

ASTM WK63178 - Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing is a work item revision to existing standard B860-17

ASTM WK63179 - Standard Terminology Relating to Non-ferrous Metals and Alloys is a work item revision to existing standard B899-16

ASTM WK63180 - Standard Practice for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight) is a work item revision to existing standard D2444-17

ASTM WK63181 - Standard Specification for Laboratory Weights and Precision Mass Standards is a work item revision to existing standard E617-13

ASTM WK63210 - Standard Practice for Determining the Effect of Overbaking on Organic Coatings is a work item revision to existing standard D2454-14

ASTM WK63211 -Practice for Heat fusion joining of polypropylene (PP) pipe and fittings

ASTM WK63212 - Standard Specification for Zinc is a work item revision to existing standard B6-13

ASTM WK63213 - Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate is a work item revision to existing standard B209-14

ASTM WK63214 - Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric) is a work item revision to existing standard B209M-14

ASTM WK63215 - Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization is a work item revision to existing standard C977-10

ASTM WK63216 - Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo, Block, Half Block, and Slab Ingot is a work item revision to existing standard B897-13

ASTM WK63217 - Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo, Block, Half Block, and Slab Ingot is a work item revision to existing standard B897-13

ASTM WK63218 - Standard Practice for Assessing the Tendency of Industrial Boiler Waters to Cause Embrittlement (USBM Embrittlement Detector Method)is a work item revision to existing standard D807-14

ASTM WK63219 - Standard Guide for Design and Construction of Expanded Metal Security Fences and Barriers is a work item revision to existing standard F2780-09(2014)

ASTM WK63220 - Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry is a work item revision to existing standard C1210-12

ASTM WK63221 - Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry is a work item revision to existing standard C1215-92(2012)e1

ASTM WK63222 - Standard Specification for Aircraft Flight Manual (AFM) for a Small Unmanned Aircraft System (sUAS) is a work item revision to existing standard F2908-16

Vui lòng liên hệ với TechDoc: