Tra cứu tất cả các loại tiêu chuẩn. 

ASTM hiện có trên 13.000 tiêu chuẩn ASTM. Trụ sở chính của tổ chức là ở West Conshohocken, Pennsylvania, Philadelphia. ASTM, được thành lập năm 1898, ra đời trước các tổ chức tiêu chuẩn khác như BSI (1901), IEC (1906), DIN (1917), ANSI (1918), AFNOR (1926), và ISO (1947). 

Tiêu chuẩn ASTM mới ban hành

ASTM C1331 - Standard Practice for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method has been revised (with title change) to C1331-18 developed by Committee E07.06, ASTM BOS Volume 03.04.

ASTM C1332 - Standard Practice for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique has been revised (with title change) to C1332-18 developed by Committee E07.06, ASTM BOS Volume 03.04.

ASTM C1589/C1589M - Standard Practice for Outdoor Weathering of Construction Seals and Sealants has been revised to C1589/C1589M-18 developed by Committee C24.40, ASTM BOS Volume 04.07.

ASTM D1631 - Standard Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method has been reapproved (with editorial change), available as D1631-10(2018)e1 developed by Committee D16.02, ASTM BOS Volume 06.04.

ASTM D4147 - Standard Practice for Applying Coil Coatings Using Wire-Wound Drawdown Bars has been revised (with title change) to D4147-18 developed by Committee D01.53, ASTM BOS Volume 06.02.

ASTM D4944 - Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester has been revised to D4944-18 developed by Committee D18.08, ASTM BOS Volume 04.08.

ASTM D5783 - Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices has been revised to D5783-18 developed by Committee D18.21, ASTM BOS Volume 04.08.

ASTM D5850 - Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells has been revised to D5850-18 developed by Committee D18.21, ASTM BOS Volume 04.08.

ASTM D8166 - Standard Test Method for Sizing and Counting Particulates in Light and Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Counters is a new standard, now available. D8166-17 developed by Committee D02.14, ASTM BOS Volume 05.05.

ASTM D8171 - Standard Test Methods for Density Determination of Flax Fiber is a new standard, now available. D8171-18 developed by Committee D13.17, ASTM BOS Volume 07.02.

ASTM E1025 - Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiographyhas been revised (with title change) to E1025-18 developed by Committee E07.01, ASTM BOS Volume 03.03.

ASTM E1610 - Standard Guide for Forensic Paint Analysis and Comparison has been revised to E1610-18 developed by Committee E30.01, ASTM BOS Volume 14.02. 

Liên hệ với TechDoc để được hỗ trợ: 

Dự thảo Tiêu chuẩn ASTM

ASTM WK62495 - Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices is a work item revision to existing standard F770-17e1

ASTM WK62501 - Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis is a work item revision to existing standard E1640-13

ASTM WK62503 -Test Method for Thermal Diffusivity by the Flash Method

ASTM WK62504 - Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction is a work item revision to existing standard D3381/D3381M-13

ASTM WK62522 -Practice for Standard Practice for Special Requirements for Bungee Jumping Operations

ASTM WK62523 - Standard Performance Specification for Vinyl-Coated and Urethane-Coated Upholstery Fabrics-Indoor (Withdrawn 2018) is a work item for the reinstatement of the withdrawn standard D3690-02(2009)

ASTM WK62524 - Standard Performance Specification for Woven, Lace, and Knit Household Curtain and Drapery Fabrics (Withdrawn 2018) is a work item for the reinstatement of the withdrawn standard D3691/D3691M-09

ASTM WK62525 - Standard Performance Specification for Knitted Upholstery Fabrics for Indoor Furniture (Withdrawn 2018) is a work item for the reinstatement of the withdrawn standard D4771/D4771M-09

ASTM WK62526 - Standard Practice for Evaluation of Attached Upholstery Fabrics (Withdrawn 2018) is a work item for the reinstatement of the withdrawn standard D4852-88(2009)e1

ASTM WK62527 - Test Method for Antimony Content Using Neutron Activation Analysis (NAA) is a work item revision to existing standard E3063-17

ASTM WK62528 - Standard Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner is a work item revision to existing standard F2561-17

ASTM WK62529 - Standard Practice for Installation of Seamless Molded Hydrophilic Gaskets (SMHG) for Long-Term Watertightness of Cured-in-Place Rehabilitation of Main and Lateral Pipelines is a work item revision to existing standard F3240-17

ASTM WK62530 - Standard Practice for The Sectional Repair of Damaged Pipe By Means of An Inverted Cured-In-Place Liner is a work item revision to existing standard F2599-16

ASTM WK62531 - Standard Test Method for Colorimetry of Teeth Using Digital Still Camera Technology is a work item for the withdrawal of the existing standard E2466-13

ASTM WK62532 - Standard Test Method for Objective Measurement of Gingival Color Using Digital Still Cameras is a work item for the withdrawal of the existing standard E2545-07(2012)

ASTM WK62533 - Standard Test Method for Objective Quantification of Dental Plaque Using Digital Still Cameras is a work item for the withdrawal of the existing standard E2670-15

ASTM WK62534 - Standard Specification for Solar Simulation for Photovoltaic Testing is a work item revision to existing standard E927-10(2015)

ASTM WK62537 - Standard Practice for Prioritizing Asset Resources in Acquisition, Utilization, and Disposition is a work item revision to existing standard E2495-13

ASTM WK62538 - Standard Specification for Slag Cement for Use in Concrete and Mortars is a work item revision to existing standard C989/C989M-17

ASTM WK62548 - Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, and Fibered without Asbestos is a work item revision to existing standard D2824/D2824M-13

ASTM WK62552 - Standard Test Methods for Solvent Bearing Bituminous Compounds is a work item revision to existing standard D6511/D6511M-06(2011)e1

ASTM WK62553 - Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip is a work item revision to existing standard A480/A480M-17

ASTM WK62554 - Standard Consumer Safety Specification for Infant Bath Seats is a work item revision to existing standard F1967-13

ASTM WK62564 - Standard Specification for Pig Tin is a work item revision to existing standard B339-12

ASTM WK62565 - Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing is a work item revision to existing standard A512-17

ASTM WK62566 - Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing is a work item revision to existing standard A513/A513M-15

ASTM WK62567 - Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position is a work item revision to existing standard D3801-10

ASTM WK62568 - Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position is a work item revision to existing standard D3014-11

ASTM WK62569 - Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materialsis a work item revision to existing standard D4986-10

ASTM WK62570 - Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems is a work item revision to existing standard F877-11a

ASTM WK62571 - Standard Test Method for Measurement of Fatigue Crack Growth Rates is a work item revision to existing standard E647-15e1

ASTM WK62572 - Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materialsis a work item revision to existing standard D4986-10

ASTM WK62573 - Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass) is a work item revision to existing standard D5628-10

ASTM WK62574 - Standard Test Method for Marsh Funnel Viscosity of Clay Construction Slurries is a work item revision to existing standard D6910/D6910M-09

ASTM WK62575 - Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry is a work item revision to existing standard D7309-13

ASTM WK62576 - Standard Test Methods for Cone Penetration of Lubricating Grease is a work item revision to existing standard D217-17

ASTM WK62577 - Standard Test Method for Prolonged Worked Stability of Lubricating Grease in Presence of Water (Water Stability Test) is a work item revision to existing standard D7342-15

ASTM WK62578 - Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete is a work item revision to existing standard C42/C42M-16

ASTM WK62579 - Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment is a work item revision to existing standard D1403-10

ASTM WK62580 - Standard Specification for Precipitation–Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Platesis a work item revision to existing standard A710/A710M-02(2013)

ASTM WK62581 - Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material is a work item revision to existing standard F1732-12

ASTM WK62583 -Guide for Risk Management of Pharmaceutical Product Recycling, Reuse and Reformulation

ASTM WK62584 -Practice for Selection, installation and testing of Under-Vehicle Inspection Systems

ASTM WK62585 - Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation is a work item revision to existing standard D7128-05(2010) 

Liên hệ với TechDoc để được hỗ trợ: