Danh mục các Tiêu chuẩn ASTM.

Giới thiệu Tiêu chuẩn ASTM.

Liên hệ với TechDoc để được hỗ trợ:

Tiêu chuẩn Hoa Kỳ mới ban hành

ASTM A860/A860M - Standard Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings has been revised to A860/A860M-18 developed by Committee A01.22, ASTM BOS Volume 01.01.

ASTM B364 - Standard Specification for Tantalum and Tantalum Alloy Ingots has been reinstated as B364-18 developed by Committee B10.03, ASTM BOS Volume 02.04.

ASTM B391 - Standard Specification for Niobium and Niobium Alloy Ingots has been reinstated as B391-18 developed by Committee B10.03, ASTM BOS Volume 02.04.

ASTM D4025 - Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection has been revised to D4025-18 developed by Committee D19.05, ASTM BOS Volume 11.02.

ASTM D8111 - Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine has been revised to D8111-18 developed by Committee D02.B0, ASTM BOS Volume 05.05.

ASTM D8183 - Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method is a new standard, now available. D8183-18 developed by Committee D02.01, ASTM BOS Volume 05.05.

ASTM D888 - Standard Test Methods for Dissolved Oxygen in Water has been revised to D888-18 developed by Committee D19.05, ASTM BOS Volume 11.01.

ASTM D892 - Standard Test Method for Foaming Characteristics of Lubricating Oils has been revised to D892-18 developed by Committee D02.06, ASTM BOS Volume 05.01.

ASTM E2147 - Standard Specification for Audit and Disclosure Logs for Use in Health Information Systemshas been reinstated as E2147-18 developed by Committee E31.25, ASTM BOS Volume 14.01.

ASTM E2244 - Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer has been reapproved, available as E2244-11(2018) developed by Committee E08.05, ASTM BOS Volume 03.01.

ASTM E2245 - Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer has been reapproved, available as E2245-11(2018) developed by Committee E08.05, ASTM BOS Volume 03.01.

ASTM E2246 - Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer has been reapproved, available as E2246-11(2018) developed by Committee E08.05, ASTM BOS Volume 03.01.

ASTM E2444 - Standard Terminology Relating to Measurements Taken on Thin, Reflecting Films has been reapproved, available as E2444-11(2018) developed by Committee E08.02, ASTM BOS Volume 03.01.

ASTM E2713 - Standard Guide to Forensic Engineering has been revised to E2713-18 developed by Committee E58.01, ASTM BOS Volume 14.02.

ASTM E350 - Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron has been revised to E350-18 developed by Committee E01.01, ASTM BOS Volume 03.05.

ASTM F1309 - Standard Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundationshas been reapproved, available as F1309-98(2018) developed by Committee F25.03, ASTM BOS Volume 01.07.

ASTM F1385 - Standard Practice for Platforms in Cargo Tanks has been reapproved, available as F1385-07(2018) developed by Committee F25.03, ASTM BOS Volume 01.07.

ASTM F1533 - Standard Specification for Deformed Polyethylene (PE) Liner (Withdrawn 2018) has been withdrawn, with no replacement. F1533- developed by Committee F17.26, ASTM BOS Volume 08.04.

ASTM F2881/F2881M - Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications has been revised (with designation change) to F2881/F2881M-18 developed by Committee F17.62, ASTM BOS Volume 08.04.

ASTM F3179/F3179M - Standard Specification for Performance of Aircraft has been revised (with title change) to F3179/F3179M-18 developed by Committee F44.20, ASTM BOS Volume 15.11.

ASTM F3198 - Standard Specification for Light Sport Aircraft Manufacturer’s Continued Operational Safety (COS) Program is a new standard, now available. F3198-18 developed by Committee F37.70, ASTM BOS Volume 15.11.

ASTM F3308/F3308M - Standard Practice for Sampling and Testing Frequency for Recycled Materials in Polyethylene (PE) Pipe for Non-Pressure Applicationsis a new standard, now available. F3308/F3308M-18 developed by Committee F17.62, ASTM BOS Volume 08.04.

ASTM G150 - Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels and Related Alloys has been revised (with title change) to G150-18 developed by Committee G01.11, ASTM BOS Volume 03.02.

Liên hệ với TechDoc để được hỗ trợ:

New ASTM Work Items

ASTM WK63695 -Test Method for Standard Test Method for Analysis of 4,4 -Isopropylidenediphenol (BPA) by High Performance Liquid Chromatography

ASTM WK63697 - Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished is a work item revision to existing standard A108-13

ASTM WK63698 - Standard Practice for Qualitative Adhesion Testing of Metallic Coatings is a work item revision to existing standard B571-97(2013)

ASTM WK63699 - Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material is a work item revision to existing standard D5232-13

ASTM WK63700 - Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface is a work item revision to existing standard A879/A879M-12(2017)

ASTM WK63701 - Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraseris a work item revision to existing standard D4060-14

ASTM WK63702 - Standard Practice for Preparation and Conditioning of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete Used for Length Change Measurements is a work item revision to existing standard C341/C341M-13

ASTM WK63703 - Standard Practice for Enumeration of Non-Tuberculosis Mycobacteria in Aqueous Metalworking Fluids by Plate Count Method is a work item revision to existing standard E2563-13

ASTM WK63704 - Standard Practice for Enumeration of Mycobacteria in Metalworking Fluids by Direct Microscopic Counting (DMC) Method is a work item revision to existing standard E2564-13

ASTM WK63705 - Standard Consumer Safety Performance Specification for Home Playground Equipment is a work item revision to existing standard F1148-17

ASTM WK63706 - Standard Practice for Evaluation of Antimicrobials in Liquid Fuels Boiling Below 390°C is a work item revision to existing standard E1259-16

ASTM WK63707 - Standard Test Method for Measurement of Airborne Metal and Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption is a work item revision to existing standard E2864-13

ASTM WK63708 - Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406) is a work item revision to existing standard F1108-14

ASTM WK63709 - Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings is a work item revision to existing standard A1080-15

ASTM WK63710 - Standard Test Method for Corrosion of Cast Aluminum Alloys in Non-Aqueous Engine Coolants Under Heat-Rejecting Conditions is a work item revision to existing standard D7934/D7934M-14

ASTM WK63711 - Standard Test Method for Corrosion Test for Non-Aqueous Engine Coolants in Glassware is a work item revision to existing standard D7935/D7935M-14

ASTM WK63712 - Standard Specification for Naval Brass Rod, Bar, and Shapes is a work item revision to existing standard B21/B21M-14

ASTM WK63713 - Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers as Coatings or Additives with Paper and Other Substrates Designed to be Aerobically Composted in Municipal or Industrial Facilities is a work item revision to existing standard D6868-17

ASTM WK63716 - Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages is a work item revision to existing standard E251-92(2014)

ASTM WK63717 - Standard Specification for Steel Castings, Stainless, Precipitation Hardening is a work item revision to existing standard A747/A747M-16a

ASTM WK63719 - Standard Guide for Installing Bonded Resistance Strain Gages is a work item revision to existing standard E1237-93(2014)

ASTM WK63720 - Standard Guide for High-Temperature Static Strain Measurement is a work item revision to existing standard E1319-98(2014)

ASTM WK63721 - Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials is a work item revision to existing standard E21-17

ASTM WK63722 - Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials is a work item revision to existing standard E21-17

ASTM WK63723 - Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials is a work item revision to existing standard E21-17

ASTM WK63724 - Standard Specification for Deformed Polyethylene (PE) Liner (Withdrawn 2018) is a work item for the reinstatement of the withdrawn standard F1533-01(2009)

ASTM WK63725 - Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process is a work item revision to existing standard A653/A653M-17

ASTM WK63726 - Standard Practice for Analysis of Strain Gage Rosette Data is a work item revision to existing standard E1561-93(2014)

ASTM WK63727 - is a work item for the reinstatement of the withdrawn standard F1734-03(2009)

ASTM WK63728 - Standard Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation is a work item revision to existing standard E574-13

ASTM WK63729 - Standard Specification for Steel Forgings, General Requirements is a work item revision to existing standard A788/A788M-18 

Liên hệ với TechDoc để được hỗ trợ: