Tra cứu tất cả các loại tiêu chuẩn.

Tiêu chuẩn Hoa Kỳ ASTM mới ban hành

ASTM A350/A350M - Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components has been revised to A350/A350M-18 developed by Committee A01.22, ASTM BOS Volume 01.01.

ASTM A638/A638M - Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service has been reapproved (with editorial change), available as A638/A638M-10(2018)e1 developed by Committee A01.17, ASTM BOS Volume 01.03.

ASTM B843 - Standard Specification for Magnesium Alloy Anodes for Cathodic Protection has been editorially changed, available as B843-18e1 developed by Committee B07.04, ASTM BOS Volume 02.02.

ASTM C1178/C1178M - Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panelhas been revised to C1178/C1178M-18 developed by Committee C11.01, ASTM BOS Volume 04.01.

ASTM C1183/C1183M - Standard Test Method for Extrusion Rate of Elastomeric Sealants has been reapproved, available as C1183/C1183M-13(2018) developed by Committee C24.20, ASTM BOS Volume 04.07.

ASTM C1248 - Standard Test Method for Staining of Porous Substrate by Joint Sealants has been revised to C1248-18 developed by Committee C24.40, ASTM BOS Volume 04.07.

ASTM C1872 - Standard Test Method for Thermogravimetric Analysis of Hydraulic Cement is a new standard, now available. C1872-18 developed by Committee C01.23, ASTM BOS Volume 04.01.

ASTM C645 - Standard Specification for Nonstructural Steel Framing Members has been revised to C645-18 developed by Committee C11.02, ASTM BOS Volume 04.01.

ASTM C836/C836M - Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course has been revised to C836/C836M-18 developed by Committee D08.22, ASTM BOS Volume 04.04.

ASTM C955 - Standard Specification for Cold-Formed Steel Structural Framing Members has been revised to C955-18 developed by Committee C11.02, ASTM BOS Volume 04.01.

ASTM D5081/D5081M - Standard Test Method for Aggregate Layer Hiding Power has been reapproved, available as D5081/D5081M-90(2018) developed by Committee D08.03, ASTM BOS Volume 04.04.

ASTM D5100/D5100M - Standard Test Method for Adhesion of Mineral Aggregate to Hot Bitumen has been reapproved, available as D5100/D5100M-95a(2018) developed by Committee D08.03, ASTM BOS Volume 04.04.

ASTM D5643/D5643M - Standard Specification for Coal Tar Roof Cement, Asbestos Free has been reapproved, available as D5643/D5643M-06(2018) developed by Committee D08.05, ASTM BOS Volume 04.04.

ASTM D6072/D6072M - Standard Practice for Obtaining Samples of Geosynthetic Clay Liners has been revised to D6072/D6072M-18 developed by Committee D35.04, ASTM BOS Volume 04.13.

ASTM D6141 - Standard Guide for Screening Clay Portion and Index Flux of Geosynthetic Clay Liner (GCL) for Chemical Compatibility to Liquids has been revised to D6141-18 developed by Committee D35.04, ASTM BOS Volume 04.13.

ASTM D6380/D6380M - Standard Specification for Asphalt Roll Roofing (Organic Felt) has been reapproved, available as D6380/D6380M-03(2018) developed by Committee D08.02, ASTM BOS Volume 04.04.

ASTM D6749 - Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)has been reapproved, available as D6749-02(2018) developed by Committee D02.07, ASTM BOS Volume 05.03.

ASTM D7008 - Standard Specification for Geosynthetic Alternate Daily Covers has been reapproved, available as D7008-08(2018) developed by Committee D35.06, ASTM BOS Volume 04.13.

ASTM D7239 - Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications has been reapproved, available as D7239-13(2018) developed by Committee D35.06, ASTM BOS Volume 04.13.

ASTM D7654/D7654M - Standard Specification for Asphalt Used in Roofing Measured by Dynamic Shear Rheometer has been reapproved, available as D7654/D7654M-10(2018) developed by Committee D08.03, ASTM BOS Volume 04.04.

ASTM D7712 - Standard Terminology for Sampling and Analysis of Asbestos has been revised to D7712-18 developed by Committee D22.07, ASTM BOS Volume 11.07.

ASTM D8185 - Standard Guide for In-Service Lubricant Viscosity Measurement is a new standard, now available. D8185-18 developed by Committee D02.96, ASTM BOS Volume 05.05.

ASTM E1019 - Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques has been revised (with title change) to E1019-18 developed by Committee E01.01, ASTM BOS Volume 03.05.

ASTM E1109 - Standard Test Method for Determining the Bulk Density of Solid Waste Fractions has been revised to E1109-18 developed by Committee D34.03, ASTM BOS Volume 11.04.

ASTM E2814 - Standard Specification for Industrial Woven Wire Filter Cloth has been revised to E2814-18 developed by Committee E29.01, ASTM BOS Volume 14.02.

ASTM E585/E585M - Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable has been revised to E585/E585M-18 developed by Committee E20.12, ASTM BOS Volume 14.03.

ASTM F1304 - Standard Test Method for Deflection of Resilient Floor Tile has been revised to F1304-18 developed by Committee F06.20, ASTM BOS Volume 15.04.

ASTM F2707 - Standard Safety Performance Specification for Safe Design and Installation of Field Fabricated Suction-Limiting Vent Systems for Suction Entrapment Prevention in Swimming Pools, Spas, Hot Tubs, and Wading Pools has been editorially changed, available as F2707-10(2018)e1 developed by Committee F15.51, ASTM BOS Volume 15.11.

ASTM F2826 - Standard Test Method for Evaluating the Sustained Air Performance and Exhaust Emission Efficiencies of Central Vacuum Cleaning Units has been reapproved, available as F2826-14(2018) developed by Committee F11.22, ASTM BOS Volume 15.08.

ASTM F3317 - Standard Consumer Safety Specification for Infant Floor Seats is a new standard, now available. F3317-18 developed by Committee F15.16, ASTM BOS Volume 15.11.

ASTM G148 - Standard Practice for Evaluation of Hydrogen Uptake, Permeation, and Transport in Metals by an Electrochemical Technique has been reapproved, available as G148-97(2018) developed by Committee G01.11, ASTM BOS Volume 03.02.

ASTM G61 - Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys has been reapproved, available as G61-86(2018) developed by Committee G01.11, ASTM BOS Volume 03.02.

ASTM G91 - Standard Practice for Monitoring Atmospheric SO2 Deposition Rate for Atmospheric Corrosivity Evaluation has been reapproved, available as G91-11(2018) developed by Committee G01.04, ASTM BOS Volume 03.02.

ASTM G96 - Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods) has been reapproved, available as G96-90(2018) developed by Committee G01.11, ASTM BOS Volume 03.02.

Liên hệ với TechDoc để được hỗ trợ:

Dự thảo Tiêu chuẩn Hoa Kỳ ASTM đang xây dựng

ASTM WK59444 -Practice for Field Handling of Green Petroleum Coke

ASTM WK63862 - IEEE/ASTM SI 10 American National Standard for Metric Practice is a work item revision to existing standard SI10-16

ASTM WK63863 - IEEE/ASTM SI 10 American National Standard for Metric Practice is a work item revision to existing standard SI10-16

ASTM WK63864 - Standard Test Method for Determination of Fire Resistance of Aircraft Hydraulic Fluids by Autoignition Temperature is a work item revision to existing standard D2155-12

ASTM WK63865 - Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws is a work item revision to existing standard F897-02(2013)

ASTM WK63866 - Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service is a work item revision to existing standard A182/A182M-18

ASTM WK63867 - Standard Guide for in vitro Degradation Testing of Absorbable Metals is a work item revision to existing standard F3268-18

ASTM WK63871 -Specification for Playground Surface Impact Testing in a Lab at a Specified Test Height

ASTM WK63872 - Standard Test Method for n-Heptane Insolubles is a work item revision to existing standard D3279-12e1

ASTM WK63873 - Standard Practice for Performing Accelerated Outdoor Weathering of Factory-Coated Embossed Hardboard Using Concentrated Natural Sunlight and a Soak-Freeze-Thaw Procedure is a work item revision to existing standard D5722-14

ASTM WK63874 - Standard Terminology for Digital and Multimedia Evidence Examination is a work item revision to existing standard E2916-13

ASTM WK63875 - Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range is a work item revision to existing standard E1921-18

ASTM WK63876 - Standard Test Methods for Creep Relaxation of a Gasket Material is a work item revision to existing standard F38-00(2014)

ASTM WK63877 - Standard Practice for Dimensions of a Modular Series of Refractory Brick and Shapes is a work item revision to existing standard C909-93(2010)

ASTM WK63878 - Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Residential Building Construction is a work item revision to existing standard C1743-12

ASTM WK63890 - Standard Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers is a work item for the withdrawal of the existing standard E667-98(2017)

ASTM WK63893 - Standard Test Method for Conradson Carbon Residue of Petroleum Products is a work item revision to existing standard D189-06(2014)

ASTM WK63897 -Classification for Determination of Low-frequency Impact Noise Ratings

ASTM WK63898 - Standard Test Methods for Saponification Number of Petroleum Products is a work item revision to existing standard D94-07(2017)

ASTM WK63899 - Standard Practice for Location of Test Specimens from Magnesia-Carbon and Impregnated Burned Basic Brick is a work item revision to existing standard C1190-95(2010)

ASTM WK63900 -Test Method for Determination of Paraffin Content in Saturated Bio-Jet Fuel by Gas Chromatography

ASTM WK63902 - Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) is a work item revision to existing standard D5185-18

ASTM WK63905 - Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves is a work item revision to existing standard D3426-97(2012)

ASTM WK63906 - Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials is a work item revision to existing standard D3638-12

ASTM WK63907 - Standard Test Method for Evaluation of Resistance to Electrical Breakdown by Treeing in Solid Dielectric Materials Using Diverging Fields is a work item revision to existing standard D3756-97(2010)

ASTM WK63908 - Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)is a work item revision to existing standard A134-96(2012)

ASTM WK63909 - Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions is a work item revision to existing standard D5032-11

ASTM WK63914 -Specification for Standard Specfictation for Polyalkylene Glycol (PAG) Lubricant Used in Steam or Gas Turbines

ASTM WK63915 - Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs is a work item revision to existing standard E2461-12(2017)

ASTM WK63916 - Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs is a work item revision to existing standard E2461-12(2017)

ASTM WK63917 - Standard Test Method for Permeability of Granular Soils (Constant Head) (Withdrawn 2015) is a work item for the reinstatement of the withdrawn standard D2434-68(2006)

ASTM WK63918 - Standard Specification for Ball Drop Impact Resistance of Laminated Architectural Flat Glazing is a work item revision to existing standard F3006-13

ASTM WK63919 - Standard Test Method for Ball Drop Impact Resistance of Laminated Architectural Flat Glass is a work item revision to existing standard F3007-13

ASTM WK63920 - Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses is a work item revision to existing standard B488-11

ASTM WK63921 - Standard Test Methods for Vitrified Clay Pipe is a work item revision to existing standard C301-13

ASTM WK63924 - Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated is a work item revision to existing standard C700-13

Liên hệ với TechDoc để được hỗ trợ: