Tra cứu tất cả các loại tiêu chuẩn.

ASTM A352/A352M - Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service has been revised to A352/A352M-18 developed by Committee A01.18, ASTM BOS Volume 01.02.

ASTM A815/A815M - Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings has been revised to A815/A815M-18 developed by Committee A01.22, ASTM BOS Volume 01.01.

ASTM C1380 - Standard Test Method for Determination of Uranium Content and Isotopic Composition by Isotope Dilution Mass Spectrometry (Withdrawn 2018) has been withdrawn, with no replacement. C1380-04(2011) developed by Committee C26.05, ASTM BOS Volume 12.01.

ASTM C191 - Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle has been revised to C191-18 developed by Committee C01.30, ASTM BOS Volume 04.01.

ASTM D1509 - Standard Test Methods for Carbon Black—Heating Loss has been revised to D1509-18 developed by Committee D24.31, ASTM BOS Volume 09.01.

ASTM D3053 - Standard Terminology Relating to Carbon Black has been revised to D3053-18 developed by Committee D24.41, ASTM BOS Volume 09.01.

ASTM D344 - Standard Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts (Withdrawn 2018) has been withdrawn, with no replacement. D344- developed by Committee D01.26, ASTM BOS Volume 06.01.

ASTM D4483 - Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries has been revised to D4483-18 developed by Committee D11.16, ASTM BOS Volume 09.01.

ASTM D7157 - Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase Separation; Optical Detection) has been reapproved, available as D7157-12(2018) developed by Committee D02.14, ASTM BOS Volume 05.04.

ASTM D7343 - Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants has been revised to D7343-18 developed by Committee D02.03, ASTM BOS Volume 05.04.

ASTM D7849 - Standard Classification for Nomenclature of Reference Materials of Committee D24 has been revised to D7849-18 developed by Committee D24.41, ASTM BOS Volume 09.01.

ASTM D8056 - Standard Guide for Elemental Analysis of Crude Oil has been revised to D8056-18 developed by Committee D02.03, ASTM BOS Volume 05.05.

ASTM D828 - Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus has been editorially changed, available as D828-16e1 developed by Committee D09.01, ASTM BOS Volume 10.01.

ASTM E2129 - Standard Practice for Data Collection for Sustainability Assessment of Building Products has been revised to E2129-18 developed by Committee E60.01, ASTM BOS Volume 04.12.

ASTM E2208 - Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems has been reapproved (with editorial change), available as E2208-02(2018)e1 developed by Committee E08.03, ASTM BOS Volume 03.01.

ASTM E2881 - Standard Test Method for Extraction and Derivatization of Vegetable Oils and Fats from Fire Debris and Liquid Samples with Analysis by Gas Chromatography-Mass Spectrometry has been revised to E2881-18 developed by Committee E30.01, ASTM BOS Volume 14.02.

ASTM E768 - Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel has been reapproved, available as E768-99(2018) developed by Committee E04.01, ASTM BOS Volume 03.01.

ASTM F1004 - Standard Consumer Safety Specification for Expansion Gates and Expandable Enclosures has been revised to F1004-18 developed by Committee F15.16, ASTM BOS Volume 15.11.

ASTM F1316 - Standard Test Method for Measuring the Transmissivity of Transparent Parts has been revised to F1316-18 developed by Committee F07.08, ASTM BOS Volume 15.03.

ASTM F1447 - Standard Specification for Helmets Used in Recreational Bicycling or Roller Skating has been revised to F1447-18 developed by Committee F08.53, ASTM BOS Volume 15.07.

ASTM F1503 - Standard Practice for Machine/Process Capability Study Procedure (Withdrawn 2018) has been withdrawn, with no replacement. F1503- developed by Committee F16.93, ASTM BOS Volume 01.09.

ASTM F1914 - Standard Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering has been revised to F1914-18 developed by Committee F06.30, ASTM BOS Volume 15.04.

ASTM F2982 - Standard Specification for Polyester Composition Floor Tile has been revised to F2982-18 developed by Committee F06.80, ASTM BOS Volume 15.04.

ASTM F3303 - Standard for Additive Manufacturing – Process Characteristics and Performance: Practice for Metal Powder Bed Fusion Process to Meet Critical Applications is a new standard, now available. F3303-18 developed by Committee F42.05, ASTM BOS Volume 10.04.

Liên hệ với TechDoc để được hỗ trợ:

Dự thảo Tiêu chuẩn Hoa Kỳ ASTM đang xây dựng

ASTM WK64023 - Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears is a work item revision to existing standard A291/A291M-18

ASTM WK64024 - Standard Test Method for Methanol Extract of Vinyl Chloride Resins is a work item revision to existing standard D2222-14

ASTM WK64025 - Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins is a work item revision to existing standard D3596-14

ASTM WK64026 - Standard Guide for Standard Test Methods and Practices for Evaluating Pile Yarn Floor Coveringis a work item revision to existing standard D6719-12

ASTM WK64027 - Standard Test Method for Surface Moisture in Fine Aggregate is a work item revision to existing standard C70-13

ASTM WK64028 - Standard Practice for Manufacturing Characterization of Digital Detector Arrays is a work item revision to existing standard E2597/E2597M-14

ASTM WK64029 - Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction is a work item revision to existing standard C1105-08a(2016)

ASTM WK64030 -Guide for Guide for Combustion and Inert Gas Fusion Instruments

ASTM WK64031 - Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials is a work item revision to existing standard E399-17

ASTM WK64032 - Standard Test Method for Determination of In-Situ Stress in Rock Using Hydraulic Fracturing Method (Withdrawn 2017) is a work item for the reinstatement of the withdrawn standard D4645-08

ASTM WK64033 - Standard Specification for Aggregates for Radiation-Shielding Concrete is a work item revision to existing standard C637-14

ASTM WK64034 - Standard Guide for Geotechnical Mapping of Large Underground Openings in Rock (Withdrawn 2017) is a work item for the reinstatement of the withdrawn standard D4879-08

ASTM WK64035 - Standard Practices for Preserving and Transporting Rock Core Samples (Withdrawn 2017) is a work item for the reinstatement of the withdrawn standard D5079-08

ASTM WK64036 - Standard Descriptive Nomenclature of Constituents of Aggregates for Radiation-Shielding Concrete is a work item revision to existing standard C638-14

ASTM WK64037 - Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying is a work item revision to existing standard C566-13

ASTM WK64038 - Standard Specification for Ready-Mixed Concrete is a work item revision to existing standard C94/C94M-17a

ASTM WK64039 - Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners is a work item revision to existing standard F558-17a

ASTM WK64040 - Standard Test Method for Measuring Air Performance Characteristics of Central Vacuum Cleaning Systems is a work item revision to existing standard F820-17

ASTM WK64041 - Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems is a work item revision to existing standard F2105-17

ASTM WK64042 - Standard Specification for Stainless Steel Forgings is a work item revision to existing standard A473-18

ASTM WK64043 -Practice for Evaluating Methods of Controlling Sludge, Fouling and Corrosion in Fuel Systems

ASTM WK64044 - Standard Specification for Stainless Steel Forgings is a work item revision to existing standard A473-18

ASTM WK64045 - Standard Specification for Steel Forgings, General Requirements is a work item revision to existing standard A788/A788M-18

ASTM WK64046 - Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method) is a work item revision to existing standard D4445-10(2015)

ASTM WK64047 - Standard Specification for Performance of Active API Service Category Engine Oils is a work item revision to existing standard D4485-16

ASTM WK64048 - Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection is a work item revision to existing standard E329-18

ASTM WK64050 - Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection is a work item revision to existing standard E329-18

ASTM WK64051 - Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection is a work item revision to existing standard E329-18

ASTM WK64053 - Standard Specification for Refined Benzene-535 is a work item revision to existing standard D2359-18

ASTM WK64054 - Standard Specification for Refined Benzene-545 is a work item revision to existing standard D4734-18

ASTM WK64055 - Standard Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete is a work item revision to existing standard C1778-16

ASTM WK64056 - Standard Test Method for Determination of Contamination Level of Fatty Acid Methyl Esters in Middle Distillate and Residual Fuels Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method is a work item revision to existing standard D7963-14

ASTM WK64057 -Test Method for Determining the Coefficient of Friction of Synchronizer Lubricated by Mechanical Transmission Fluids (MTF) Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

ASTM WK64059 - Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C is a work item revision to existing standard D4683-17

ASTM WK64060 - Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types) is a work item revision to existing standard D1751-04(2013)e1

ASTM WK64062 - Standard Test Method for Assessment of Circulating Blood-Contacting Medical Device Materials on Partial Thromboplastin Time (PTT) is a work item revision to existing standard F2382-17e1

ASTM WK64066 - Standard Specification for Tin Mill Products, Black Plate, Double Reduced is a work item revision to existing standard A650/A650M-13

ASTM WK64067 - Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process is a work item revision to existing standard A653/A653M-17

ASTM WK64068 - Standard Practice for Underground Installation of Thermoplastic Pressure Piping is a work item revision to existing standard D2774-12

ASTM WK64069 - Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique is a work item revision to existing standard G178-16

ASTM WK64070 - Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry is a work item revision to existing standard C780-17

ASTM WK64071 - Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique is a work item revision to existing standard G178-16

ASTM WK64072 - Standard Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength is a work item revision to existing standard C513/C513M-11e1

ASTM WK64073 - Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete is a work item revision to existing standard C1064/C1064M-17

ASTM WK64074 -Specification for TRANSITION MAT for scour prevention at Pipe of culvert outlets

ASTM WK64075 - Standard Practices for Sampling Water-Formed Deposits is a work item revision to existing standard D887-13

ASTM WK64076 - Standard Specification for Food Preparation and Food Handling (Food Service) Glovesis a work item revision to existing standard D7329-07(2012)

ASTM WK64077 - Standard Test Methods for Electrical Resistivity of Liquid Paint and Related Materials is a work item revision to existing standard D5682-08(2012)

ASTM WK64078 - Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus is a work item revision to existing standard C1442-14

ASTM WK64079 - Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures is a work item revision to existing standard C1519-10(2017)

ASTM WK64080 - Standard Practice for Design of Amusement Rides and Devices is a work item revision to existing standard F2291-17

ASTM WK64081 - Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances (Withdrawn 2017) is a work item for the reinstatement of the withdrawn standard D4543-08e1

ASTM WK64087 - Standard Guide for Vegetative (Green) Roof Systems is a work item revision to existing standard E2777-14

ASTM WK64093 - Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques is a work item revision to existing standard E1962-14

ASTM WK64094 - Standard Test Method for Sampling of Particulate Matter in High Pressure Hydrogen used as a Gaseous Fuel with an In-Stream Filter is a work item revision to existing standard D7650-13

ASTM WK64095 - Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy is a work item revision to existing standard D1976-12

ASTM WK64096 - Standard Specification for Continuous Hot-Dip Galvanized Steel Bars for Concrete Reinforcementis a work item revision to existing standard A1094/A1094M-16

ASTM WK64097 -Practice for Spinal Fusion Cage Computational Modeling

ASTM WK64098 - Standard Guide for Selection of Methods for Estimating Soil Loss by Erosion is a work item for the withdrawal of the existing standard D6629-01(2012)e1

ASTM WK64099 - Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption is a work item revision to existing standard D6556-17

ASTM WK64100 - Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet, and Strip is a work item revision to existing standard B168-11(2016)

ASTM WK64101 - Standard Test Method for Determination of Fuel Dilution for In-Service Engine Oils by Gas Chromatography is a work item revision to existing standard D7593-14

ASTM WK64102 - Standard Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels—High Performance Liquid Chromatograph (HPLC) Method is a work item revision to existing standard D7524-10(2015)

ASTM WK64103 - Standard Test Method for Available Cyanides with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection is a work item revision to existing standard D6888-16

ASTM WK64104 - Standard Guide for Coating Inspection and Acute Particulate Characterization of Coated Drug-Eluting Vascular Stent Systems is a work item revision to existing standard F2743-11

ASTM WK64105 - Standard Test Method for Ash from Petroleum Products is a work item revision to existing standard D482-13

 ASTM WK64106 - Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils is a work item revision to existing standard D6426-13

ASTM WK64107 - Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test is a work item revision to existing standard D7369-11

ASTM WK64108 - Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water is a work item revision to existing standard D3625/D3625M-12

ASTM WK64109 -Practice for In-service monitoring of phosphate ester based fluids for steam turbine electro-hydraulic control (EHC) systems

ASTM WK64110 - Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe and Tube is a work item revision to existing standard B167-11(2016)

ASTM WK64111 - Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine is a work item revision to existing standard D7420-17

ASTM WK64113 - Standard Test Method for Water Using Volumetric Karl Fischer Titration is a work item revision to existing standard E203-16

ASTM WK64114 - Standard Practice for Sampling Industrial Chemicals is a work item revision to existing standard E300-03(2017)

ASTM WK64115 - Standard Test Method for Water in Organic Liquids by Coulometric ASTM Karl Fischer Titration is a work item revision to existing standard E1064-16

ASTM WK64116 - Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure) is a work item revision to existing standard E2680-16

ASTM WK64117 -Classification for Characterization of Particles using mathematical analysis

ASTM WK64118 -Practice for Extension of data from NFPA 285 for fire testing of exterior assemblies

ASTM WK64119 - Standard Terminology of Fire Standards is a work item revision to existing standard E176-18

ASTM WK64120 - Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods is a work item revision to existing standard E2699-13

ASTM WK64121 - Standard Practice for Digital Imaging and Communication Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods is a work item revision to existing standard E2738-13e1

ASTM WK64122 - Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation is a work item revision to existing standard D6432-11

Liên hệ với TechDoc để được hỗ trợ: