Tra cứu tất cả các loại tiêu chuẩn.

Tiêu chuẩn Hoa Kỳ ASTM mới ban hành

ASTM A283/A283M - Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates has been revised to A283/A283M-18 developed by Committee A01.02, ASTM BOS Volume 01.04.

ASTM A291/A291M - Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears has been revised to A291/A291M-18 developed by Committee A01.06, ASTM BOS Volume 01.05.

ASTM A633/A633M - Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates has been revised to A633/A633M-18 developed by Committee A01.02, ASTM BOS Volume 01.04.

ASTM C1005 - Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements has been revised to C1005-18 developed by Committee C01.95, ASTM BOS Volume 04.01.

ASTM C1802 - Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Fabricated Metal Horizontal Access Hatches for Utility, Water, and Wastewater Structures has been revised to C1802-18a developed by Committee C27.10, ASTM BOS Volume 04.05.

ASTM C497M - Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile (Metric) has been revised to C497M-18 developed by Committee C13.09, ASTM BOS Volume 04.05.

ASTM D1601 - Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers has been revised to D1601-18 developed by Committee D20.70, ASTM BOS Volume 08.01.

ASTM D3014 - Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position has been revised to D3014-18 developed by Committee D20.30, ASTM BOS Volume 08.01.

ASTM D4603 - Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer has been revised to D4603-18 developed by Committee D20.70, ASTM BOS Volume 08.02.

ASTM D4986 - Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials has been revised to D4986-18 developed by Committee D20.30, ASTM BOS Volume 08.02.

ASTM D5628 - Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass) has been revised to D5628-18 developed by Committee D20.10, ASTM BOS Volume 08.03.

ASTM D5993 - Standard Test Method for Measuring Mass per Unit Area of Geosynthetic Clay Liners has been revised (with title change) to D5993-18 developed by Committee D35.04, ASTM BOS Volume 04.13.

ASTM D6108 - Standard Test Method for Compressive Properties of Plastic Lumber and Shapes has been revised to D6108-18 developed by Committee D20.20, ASTM BOS Volume 08.03.

ASTM D6111 - Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement has been revised to D6111-18 developed by Committee D20.20, ASTM BOS Volume 08.03.

ASTM D6112 - Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes has been revised to D6112-18 developed by Committee D20.20, ASTM BOS Volume 08.03.

ASTM D6117 - Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes has been revised to D6117-18 developed by Committee D20.20, ASTM BOS Volume 08.03.

ASTM D6496/D6496M - Standard Test Method for Determining Average Bonding Peel Strength Between Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners has been revised to D6496/D6496M-18 developed by Committee D35.04, ASTM BOS Volume 04.13.

ASTM D6567 - Standard Test Method for Measuring the Light Penetration of a Rolled Erosion Control Product (RECP) has been revised to D6567-18 developed by Committee D35.05, ASTM BOS Volume 04.13.

ASTM D6768/D6768M - Standard Test Method for Tensile Strength of Geosynthetic Clay Liners has been revised to D6768/D6768M-18 developed by Committee D35.04, ASTM BOS Volume 04.13.

ASTM D8184 - Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument is a new standard, now available. D8184-18 developed by Committee D02.96.06, ASTM BOS Volume 05.05.

ASTM E1999 - Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry has been revised to E1999-18 developed by Committee E01.01, ASTM BOS Volume 03.05.

ASTM E698 - Standard Test Method for Kinetic Parameters for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method has been revised to E698-18 developed by Committee E37.01, ASTM BOS Volume 14.05.

ASTM F1714 - Standard Guide for Gravimetric Wear Assessment of Prosthetic Hip Designs in Simulator Devices has been reapproved, available as F1714-96(2018) developed by Committee F04.22, ASTM BOS Volume 13.01.

ASTM F2025 - Standard Practice for Gravimetric Measurement of Polymeric Components for Wear Assessment has been reapproved, available as F2025-06(2018) developed by Committee F04.22, ASTM BOS Volume 13.01.

ASTM F770 - Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices has been revised to F770-18 developed by Committee F24.40, ASTM BOS Volume 15.07.

Liên hệ với TechDoc để được hỗ trợ:

Dự thảo Tiêu chuẩn Hoa Kỳ ASTM đang xây dựng

ASTM WK63926 -Guide for Repair and Recovery of Damaged Audio Media

ASTM WK63927 - Standard Test Method for Predicting Heat Buildup in PVC Building Products is a work item revision to existing standard D4803-10(2018)e1

ASTM WK63928 - Standard Consumer Safety Specification for Infant Bath Seats is a work item revision to existing standard F1967-13

ASTM WK63929 - Standard Test Method for Entanglements in Untwisted Filament Yarns by Needle Insertion is a work item revision to existing standard D4724-11

ASTM WK63930 - Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application is a work item revision to existing standard E1012-14e1

ASTM WK63932 - Standard Specification for Welded Copper Tube is a work item revision to existing standard B447-12a

ASTM WK63933 - Standard Specification for Welded Copper-Alloy Pipe is a work item revision to existing standard B608-11

ASTM WK63934 - Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service is a work item revision to existing standard B640-12a

ASTM WK63938 - Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications is a work item revision to existing standard A240/A240M-17

ASTM WK63939 - Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel is a work item revision to existing standard B695-04(2016)

ASTM WK63940 -Test Method for Moisture Analysis of Plutonium Dioxide (PuO2) by Thermogravimetric Mass Spectrometry (TGA-MS)

ASTM WK63941 - Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ISO Methods is a work item revision to existing standard D6358-11

ASTM WK63942 - Standard Specification for Forged or Rolled UNS N06030, UNS N06022, UNS N06035, UNS N06200, UNS N06059, UNS N10362, UNS N06686, UNS N08020, UNS N08367, UNS N10276, UNS N10665, UNS N10675, UNS N10629, UNS N08031, UNS N06045, UNS N06025, UNS R20033 Alloy Pipe Flanges, Forged Fittings, and Valves and Parts for Corrosive High-Temperature Service is a work item revision to existing standard B462-15

ASTM WK63943 - Standard Specification for Nickel Alloy Billets and Bars for Reforging is a work item revision to existing standard B472-10(2015)

ASTM WK63944 -Test Method for N-Hexane Recoverable Oil and Grease and Nonpolar Material by ATR-Infrared Determination

ASTM WK63945 - Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip is a work item revision to existing standard A480/A480M-17

ASTM WK63946 - Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip is a work item revision to existing standard A480/A480M-17

ASTM WK63948 - Standard Guide for Evaluation and Rehabilitation of Mass Masonry Walls for Changes to Thermal and Moisture Properties of the Wall is a work item revision to existing standard E3069-17

Liên hệ với TechDoc để được hỗ trợ: