Tra cứu tất cả các loại tiêu chuẩn.

ASTM A1110/A1110M - Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes with 52 KSI [360 MPa] Minimum Yield Strength and Impact Requirements is a new standard, now available. A1110/A1110M-18 developed by Committee A01.09, ASTM BOS Volume 01.01.

ASTM B689 - Standard Specification for Electroplated Engineering Nickel Coatings has been reapproved, available as B689-97(2018) developed by Committee B08.03, ASTM BOS Volume 02.05.

ASTM B734 - Standard Specification for Electrodeposited Copper for Engineering Uses has been reapproved, available as B734-97(2018) developed by Committee B08.03, ASTM BOS Volume 02.05.

ASTM B832 - Standard Guide for Electroforming with Nickel and Copper has been reapproved, available as B832-93(2018) developed by Committee B08.03, ASTM BOS Volume 02.05.

ASTM B867 - Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use has been reapproved, available as B867-95(2018) developed by Committee B08.03, ASTM BOS Volume 02.05.

ASTM B874 - Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process has been reapproved, available as B874-96(2018) developed by Committee B08.03, ASTM BOS Volume 02.05.

ASTM B875 - Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process has been reapproved, available as B875-96(2018) developed by Committee B08.03, ASTM BOS Volume 02.05.

ASTM D1240 - Standard Test Methods for Rosin Acids Content of Pine Chemicals, Including Rosin, Tall Oil, and Related Products has been reapproved, available as D1240-14(2018) developed by Committee D01.34, ASTM BOS Volume 06.03.

ASTM D1259 - Standard Test Methods for Nonvolatile Content of Resin Solutions has been reapproved, available as D1259-06(2018) developed by Committee D01.21, ASTM BOS Volume 06.01.

ASTM D1544 - Standard Test Method for Color of Transparent Liquids (Gardner Color Scale) has been reapproved, available as D1544-04(2018) developed by Committee D01.26, ASTM BOS Volume 06.01.

ASTM D1978 - Standard Guide for Analysis of Electrocoat Bath Samples has been reapproved, available as D1978-91(2018) developed by Committee D01.21, ASTM BOS Volume 06.01.

ASTM D3366 - Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) has been reinstated as D3366-18 developed by Committee D16.02, ASTM BOS Volume 06.04.

ASTM D3928 - Standard Test Method for Evaluation of Gloss or Sheen Uniformity has been reapproved, available as D3928-00a(2018) developed by Committee D01.42, ASTM BOS Volume 06.02.

ASTM D3960 - Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings has been reapproved, available as D3960-05(2018) developed by Committee D01.21, ASTM BOS Volume 06.01.

ASTM D4140 - Standard Guide for Determining Volatile and Nonvolatile Content of Driers, Drying Oils, Naval Stores, and Solvents has been reapproved, available as D4140-07(2018) developed by Committee D01.21, ASTM BOS Volume 06.01.

ASTM D4206 - Standard Test Method for Sustained Burning of Liquid Mixtures Using the Small Scale Open-Cup Apparatus has been reapproved, available as D4206-96(2018) developed by Committee D01.21, ASTM BOS Volume 06.01.

ASTM D5768 - Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids has been reapproved, available as D5768-02(2018) developed by Committee D01.34, ASTM BOS Volume 06.03.

ASTM D7358 - Standard Test Method for Water Content of Paints by Quantitative Calcium Hydride Reaction Test Kit has been reapproved, available as D7358-07(2018) developed by Committee D01.21, ASTM BOS Volume 06.01.

ASTM D7578 - Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants has been revised to D7578-18 developed by Committee D02.03, ASTM BOS Volume 05.04.

ASTM D7588 - Standard Guide for FT-IR Fingerprinting of a Non-Aqueous Liquid Paint as Supplied in the Manufacturer's Container has been reapproved, available as D7588-11(2018) developed by Committee D01.21, ASTM BOS Volume 06.01.

ASTM D7767 - Standard Test Method to Measure Volatiles from Radiation Curable Acrylate Monomers, Oligomers, and Blends and Thin Coatings Made from Them has been reapproved, available as D7767-11(2018) developed by Committee D01.21, ASTM BOS Volume 06.01.

ASTM D7768 - Standard Test Method for Speciated Organic Volatile Content of Waterborne Multi-Component Coatings by Gas Chromatography has been reapproved, available as D7768-12(2018) developed by Committee D01.21, ASTM BOS Volume 06.01.

ASTM D7893 - Standard Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products has been reapproved, available as D7893-13(2018) developed by Committee D01.53, ASTM BOS Volume 06.02.

ASTM D8087 - Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) Using Tristimulus Colorimetryis a new standard, now available. D8087-18 developed by Committee D16.02, ASTM BOS Volume 06.04.

ASTM E1312 - Standard Practice for Electromagnetic (Eddy Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature has been revised to E1312-18 developed by Committee E07.07, ASTM BOS Volume 03.03.

ASTM E1732 - Standard Terminology Relating to Forensic Science has been revised to E1732-18a developed by Committee E30.92, ASTM BOS Volume 14.02.

ASTM E2113 - Standard Test Method for Length Change Calibration of Thermomechanical Analyzers has been revised to E2113-18 developed by Committee E37.10, ASTM BOS Volume 14.05.

ASTM E243 - Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes has been revised to E243-18 developed by Committee E07.07, ASTM BOS Volume 03.03.

ASTM E3016 - Standard Guide for Establishing Confidence in Digital and Multimedia Evidence Forensic Results by Error Mitigation Analysis has been revised (with title change) to E3016-18 developed by Committee E30.12, ASTM BOS Volume 14.02.

ASTM F2785 - Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings has been revised to F2785-18 developed by Committee F17.60, ASTM BOS Volume 08.04.

Liên hệ với TechDoc để được hỗ trợ:

Dự thảo Tiêu chuẩn Hoa Kỳ ASTM đang xây dựng

ASTM WK64001 - Standard Guide for Identification and Quantitation of Organic Compounds in Water by Combined Gas Chromatography and Electron Impact Mass Spectrometry is a work item revision to existing standard D4128-06(2012)

ASTM WK64003 - Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance is a work item revision to existing standard G138-12

ASTM WK64004 - Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer is a work item revision to existing standard G130-12

ASTM WK64005 -Test Method for Flammability and Labeling Requirements for Consumer Tents

ASTM WK64006 - Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels is a work item revision to existing standard C1208/C1208M-16a

ASTM WK64007 - Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels is a work item revision to existing standard C1208/C1208M-16a

ASTM WK64008 - Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels is a work item revision to existing standard C1208/C1208M-16a

ASTM WK64009 - Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings is a work item revision to existing standard F1387-99(2012)

ASTM WK64010 - Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus is a work item revision to existing standard D3143/D3143M-13

ASTM WK64011 -Classification for Wear and Related Forms of Surface Damage

ASTM WK64012 - Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for is a work item revision to existing standard A568/A568M-17a

ASTM WK64016 - Standard Practice for Sampling and Handling Liquid Cyclic Products is a work item revision to existing standard D3437-15

ASTM WK64017 - Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride is a work item revision to existing standard D3438-15

ASTM WK64018 - Standard Practice for Sampling and Handling Phenol, Cresols, and Cresylic Acid is a work item revision to existing standard D3852-16

ASTM WK64019 - Standard Practice for Sampling and Handling Bisphenol A(4,4′ -Isopropylidinediphenol) is a work item revision to existing standard D4297-15

ASTM WK64020 - Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquidsis a work item revision to existing standard C1247-14

ASTM WK64021 - Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems is a work item revision to existing standard D6694/D6694M-15

ASTM WK64022 - Standard Practice for Installation of Exterior Windows, Doors and Skylights is a work item revision to existing standard E2112-18

Liên hệ với TechDoc để được hỗ trợ: