Tra cứu tất cả các loại tiêu chuẩn.

ASTM A941 - Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys has been revised to A941-18 developed by Committee A01.92, ASTM BOS Volume 01.01.

ASTM C1074 - Standard Practice for Estimating Concrete Strength by the Maturity Method has been revised to C1074-17 developed by Committee C09.64, ASTM BOS Volume 04.02.

ASTM C1184 - Standard Specification for Structural Silicone Sealants has been revised to C1184-18 developed by Committee C24.10, ASTM BOS Volume 04.07.

ASTM C1249 - Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications has been revised to C1249-18 developed by Committee C24.10, ASTM BOS Volume 04.07.

ASTM C1255 - Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy has been revised to C1255-18 developed by Committee C26.05, ASTM BOS Volume 12.01.

ASTM C1572/C1572M - Standard Guide for Dry Lead Glass and Oil-Filled Lead Glass Radiation Shielding Window Components for Remotely Operated Facilities has been revised to C1572/C1572M-18 developed by Committee C26.14, ASTM BOS Volume 12.01.

ASTM D2713 - Standard Test Method for Dryness of Propane (Valve Freeze Method) has been editorially changed, available as D2713-15e1 developed by Committee D02.H0, ASTM BOS Volume 05.01.

ASTM D2942 - Standard Test Method for Total Acid Acceptance of Halogenated Organic Solvents (Nonreflux Methods) has been reapproved, available as D2942-02(2018) developed by Committee D26.04, ASTM BOS Volume 15.05.

ASTM D4280 - Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers has been revised to D4280-18 developed by Committee D04.38, ASTM BOS Volume 04.03.

ASTM D5395 - Standard Specification for Reclaimed Methylene Chloride has been reapproved, available as D5395-03(2018) developed by Committee D26.02, ASTM BOS Volume 15.05.

ASTM D5766/D5766M - Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates has been reapproved, available as D5766/D5766M-11(2018) developed by Committee D30.05, ASTM BOS Volume 15.03.

ASTM D5960 - Standard Specification for Technical Grade Ethylene Dichloride has been reapproved, available as D5960-03(2018) developed by Committee D26.02, ASTM BOS Volume 15.05.

ASTM D6368 - Standard Specification for Vapor-Degreasing Solvents Based on normal-Propyl Bromide and Technical Grade normal-Propyl Bromide has been reapproved, available as D6368-06(2018) developed by Committee D26.02, ASTM BOS Volume 15.05.

ASTM D7176 - Standard Specification for Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications has been reapproved, available as D7176-06(2018) developed by Committee D35.10, ASTM BOS Volume 04.13.

ASTM E1002 - Standard Practice for Leaks Using Ultrasonicshas been reapproved, available as E1002-11(2018) developed by Committee E07.08, ASTM BOS Volume 03.03.

ASTM E1003 - Standard Practice for Hydrostatic Leak Testinghas been reapproved, available as E1003-13(2018) developed by Committee E07.08, ASTM BOS Volume 03.03.

ASTM E1035 - Standard Practice for Determining Neutron Exposures for Nuclear Reactor Vessel Support Structures has been revised to E1035-18 developed by Committee E10.05, ASTM BOS Volume 12.02.

ASTM E125 - Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings has been reapproved, available as E125-63(2018) developed by Committee E07.03, ASTM BOS Volume 03.03.

ASTM E1475 - Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Examination Data has been reapproved, available as E1475-13(2018) developed by Committee E07.11, ASTM BOS Volume 03.03.

ASTM E1958 - Standard Guide for Sensory Claim Substantiation has been revised to E1958-18 developed by Committee E18.05, ASTM BOS Volume 15.08.

ASTM E2824 - Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetry has been revised (with title change) to E2824-18a developed by Committee E01.05, ASTM BOS Volume 03.05.

ASTM E3108 - Standard Practice for Conformity Assessment of Protective Gloves Worn by Law Enforcement and Corrections Officers is a new standard, now available. E3108-18 developed by Committee E54.04, ASTM BOS Volume 15.08.

ASTM E3109 - Standard Specification for Protective Gloves Worn by Law Enforcement and Corrections Officers is a new standard, now available. E3109-18 developed by Committee E54.04, ASTM BOS Volume 15.08.

ASTM E3173 - Standard Guide for Decommissioning and Disposal of Medical Equipment is a new standard, now available. E3173-18 developed by Committee E53.30, ASTM BOS Volume 04.12.

ASTM E433 - Standard Reference Photographs for Liquid Penetrant Inspection has been reapproved, available as E433-71(2018) developed by Committee E07.03, ASTM BOS Volume 03.03.

ASTM E515 - Standard Practice for Leaks Using Bubble Emission Techniques has been reapproved, available as E515-11(2018) developed by Committee E07.08, ASTM BOS Volume 03.03.

ASTM E712 - Standard Practice for Laboratory Screening of Metallic Containment Materials for Use With Liquids in Solar Heating and Cooling Systems (Withdrawn 2018)has been withdrawn, with no replacement. E712- developed by Committee E44.05, ASTM BOS Volume 12.02.

ASTM E745 - Standard Practices for Simulated Service Testing for Corrosion of Metallic Containment Materials for Use With Heat-Transfer Fluids in Solar Heating and Cooling Systems (Withdrawn 2018) has been withdrawn, with no replacement. E745- developed by Committee E44.05, ASTM BOS Volume 12.02.

ASTM E844 - Standard Guide for Sensor Set Design and Irradiation for Reactor Surveillance has been revised to E844-18 developed by Committee E10.05, ASTM BOS Volume 12.02.

ASTM E908 - Standard Practice for Calibrating Gaseous Reference Leaks has been reapproved, available as E908-98(2018) developed by Committee E07.08, ASTM BOS Volume 03.03.

ASTM F1177 - Standard Terminology Relating to Emergency Medical Services (Withdrawn 2018) has been withdrawn, with no replacement. F1177- developed by Committee F30.06, ASTM BOS Volume 13.02.

ASTM F1468 - Standard Practice for Evaluation of Metallic Weapons Detectors for Controlled Access Search and Screening has been reapproved, available as F1468-04a(2018) developed by Committee F12.60, ASTM BOS Volume 15.08.

ASTM F1651 - Standard Guide for Training the Emergency Medical Technician (Paramedic) (Withdrawn 2018) has been withdrawn, with no replacement. F1651- developed by Committee F30.02, ASTM BOS Volume 13.02.

ASTM F1683 - Standard Practice for Creasing or Bending a Membrane Switch, Membrane Switch Flex Tail Assembly or Membrane Switch Component (Withdrawn 2018) has been withdrawn, with no replacement. F1683- developed by Committee F01.18, ASTM BOS Volume 10.04.

ASTM F2020 - Standard Practice for Design, Construction, and Procurement of Emergency Medical Services Systems (EMSS) Ambulances (Withdrawn 2018) has been withdrawn, with no replacement. F2020- developed by Committee F30.01, ASTM BOS Volume 13.02.

ASTM F2171 - Standard Guide for Defining the Performance of First Aid Providers in Occupational Settings (Withdrawn 2018) has been withdrawn, with no replacement. F2171- developed by Committee F30.02, ASTM BOS Volume 13.02.

ASTM F2730/F2730M - Standard Specification for Silicon Nitride Cylindrical Bearing Rollers has been revised to F2730/F2730M-18a developed by Committee F34.01, ASTM BOS Volume 01.09.

ASTM G115 - Standard Guide for Measuring and Reporting Friction Coefficients has been reapproved, available as G115-10(2018) developed by Committee G02.50, ASTM BOS Volume 03.02.

ASTM G143 - Standard Test Method for Measurement of Web/Roller Friction Characteristics has been reapproved, available as G143-03(2018) developed by Committee G02.50, ASTM BOS Volume 03.02.

ASTM G164 - Standard Test Method for Determination of Surface Lubrication on Flexible Webs has been reapproved, available as G164-99(2018) developed by Committee G02.50, ASTM BOS Volume 03.02.

ASTM G182 - Standard Test Method for Determination of the Breakaway Friction Characteristics of Rolling Element Bearings has been reapproved, available as G182-13(2018) developed by Committee G02.50, ASTM BOS Volume 03.02.

ASTM G194 - Standard Test Method for Measuring Rolling Friction Characteristics of a Spherical Shape on a Flat Horizontal Plane has been reapproved, available as G194-08(2018) developed by Committee G02.50, ASTM BOS Volume 03.02.

Liên hệ với TechDoc để được hỗ trợ:

Dự thảo Tiêu chuẩn Hoa Kỳ ASTM đang xây dựng

ASTM WK64383 - Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Multiple Collector Mass Spectrometer Methodis a work item revision to existing standard C1428-11

ASTM WK64384 - Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings is a work item revision to existing standard A484/A484M-18

ASTM WK64385 - Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650) Rod and Bar is a work item revision to existing standard B446-03(2014)

ASTM WK64386 - Standard Practice for Design of Amusement Rides and Devices is a work item revision to existing standard F2291-17

ASTM WK64388 - Standard Test Method for Temperature Calibration of Thermomechanical Analyzers is a work item revision to existing standard E1363-16

ASTM WK64391 -Test Method for Sizing and Counting Particulates in Light and Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Generic Continuous Flow and Bottle Sampler Automatic Particle Counters

ASTM WK64392 - Standard Practice for Collection of a Gross Sample of Coal is a work item revision to existing standard D2234/D2234M-17

ASTM WK64393 - Standard Practice for Collection of a Gross Sample of Coal is a work item revision to existing standard D2234/D2234M-17

ASTM WK64394 - Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service is a work item revision to existing standard C1695-18

ASTM WK64395 - Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC) is a work item revision to existing standard D7359-14a

ASTM WK64396 - Standard Test Methods and Definitions for Mechanical Testing of Steel Products is a work item revision to existing standard A370-17a

ASTM WK64403 - Standard Specification for Uranium Ore Concentrate is a work item revision to existing standard C967-13

ASTM WK64404 - Standard Specification for Epoxy-Coated Steel Reinforcing Bars is a work item revision to existing standard A775/A775M-17

ASTM WK64405 - Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars is a work item revision to existing standard A934/A934M-16

ASTM WK64406 - Standard Terminology of Mortar and Grout for Unit Masonry is a work item revision to existing standard C1180-10

ASTM WK64407 - Standard Test Method for Determination of Carbonyls in Pyrolysis Bio-Oils by Potentiometric Titration is a work item revision to existing standard E3146-18a

ASTM WK64408 - Standard Specification for Diesel Fuel Oilsis a work item revision to existing standard D975-18

ASTM WK64410 - Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels is a work item revision to existing standard D6751-15ce1

ASTM WK64411 - Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) is a work item revision to existing standard D445-17a

ASTM WK64412 - Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20) is a work item revision to existing standard D7467-18

ASTM WK64414 - Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Wetness is a work item revision to existing standard E2177-18

ASTM WK64415 - Standard Specification for Epoxy-Coated Steel Reinforcing Bars is a work item revision to existing standard A775/A775M-17

ASTM WK64416 - Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars is a work item revision to existing standard A934/A934M-16

ASTM WK64417 - Standard Specification for Epoxy-Coated Steel Dowels for Concrete Pavement is a work item revision to existing standard A1078/A1078M-12e1

ASTM WK64418 -Test Method for Measuring Anisotropy

ASTM WK64419 - Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service is a work item revision to existing standard A874/A874M-98(2014)

ASTM WK64420 - Standard Specification for Epoxy-Coated Steel Reinforcing Bars is a work item revision to existing standard A775/A775M-17

ASTM WK64421 -Specification for Testing WK System

ASTM WK64424 -Practice for Soft Armor Conditioning by Tumbling

ASTM WK64425 - Standard Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method) is a work item revision to existing standard D7515-09(2014)

ASTM WK64426 -Specification for Testing the Work Item Creation System

ASTM WK64427 - Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Serviceis a work item revision to existing standard D3306-14

ASTM WK64428 - Standard Specification for Fully-Formulated 1,3 Propanediol (PDO) Base Engine Coolant for Heavy-Duty Engines is a work item revision to existing standard D7517-09(2014)

ASTM WK64429 - Standard Specification for Engine Coolant Grade Glycol is a work item revision to existing standard E1177-14

ASTM WK64430 -Classification for Second Test for Work Items

ASTM WK64431 - Standard Test Method for Static Testing of Tubeless Pneumatic Tires for Rate of Loss of Inflation Pressure is a work item revision to existing standard F1112-06a(2010)

ASTM WK64432 - Standard Test Methods for Strength of Anchors in Concrete Elements is a work item revision to existing standard E488/E488M-15

ASTM WK64433 - Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service is a work item revision to existing standard C1695-18

ASTM WK64434 - Standard Specification for Ready-Mixed Concrete is a work item revision to existing standard C94/C94M-17a

ASTM WK64435 - Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products is a work item revision to existing standard B594-13

ASTM WK64436 - Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range is a work item revision to existing standard E1921-18

ASTM WK64437 - Standard Test Methods and Definitions for Mechanical Testing of Steel Products is a work item revision to existing standard A370-17a

ASTM WK64440 - Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs is a work item revision to existing standard D5402-15

ASTM WK64442 - Standard Specification for Compacted Graphite Iron Castings is a work item revision to existing standard A842-11a