Tra cứu tất cả các loại tiêu chuẩn.

ASTM A340 - Standard Terminology of Symbols and Definitions Relating to Magnetic Testing has been revised to A340-18 developed by Committee A06.92, ASTM BOS Volume 03.07.

ASTM B686/B686M - Standard Specification for Aluminum Alloy Castings, High-Strength has been revised to developed by Committee B07.01, ASTM BOS Volume 02.02.

ASTM D2232 - Standard Test Method for Evaporating Residue of Naphthalene has been reapproved, available as D2232-14(2018) developed by Committee D16.07, ASTM BOS Volume 06.04.

ASTM D3794 - Standard Guide for Testing Coil Coatings has been revised to D3794-18 developed by Committee D01.53, ASTM BOS Volume 06.02.

ASTM D4127 - Standard Terminology Used with Ion-Selective Electrodes has been revised to D4127-18a developed by Committee D19.05, ASTM BOS Volume 11.01.

ASTM D4590 - Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol In Styrene Monomer or AMS (α–Methylstyrene) by Spectrophotometry has been revised to D4590-18 developed by Committee D16.07, ASTM BOS Volume 06.04.

ASTM D5235 - Standard Test Method for Microscopic Measurement of Dry Film Thickness of Coatings on Wood Products has been revised to D5235-18 developed by Committee D01.52, ASTM BOS Volume 06.02.

ASTM D5702 - Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals has been revised to D5702-18 developed by Committee D01.46, ASTM BOS Volume 06.02.

ASTM D5713 - Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography has been reapproved (with editorial change), available as D5713-14(2018)e1 developed by Committee D16.01, ASTM BOS Volume 06.04.

ASTM D6143 - Standard Test Method for Iron Content of Bisphenol A (4,4′ - Isopropylidenediphenol) has been revised to D6143-18 developed by Committee D16.02, ASTM BOS Volume 06.04.

ASTM D6245 - Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation has been revised to D6245-18 developed by Committee D22.05, ASTM BOS Volume 11.07.

ASTM D6677 - Standard Test Method for Evaluating Adhesion by Knife has been revised to D6677-18 developed by Committee D01.46, ASTM BOS Volume 06.02.

ASTM D7034 - Standard Guide for Deriving Acceptable Levels of Airborne Chemical Contaminants in Aircraft Cabins Based on Health and Comfort Considerationshas been revised to D7034-18 developed by Committee D22.05, ASTM BOS Volume 11.07.

ASTM D7394 - Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers has been revised to D7394-18 developed by Committee D01.24, ASTM BOS Volume 06.01.

ASTM D7395 - Standard Test Method for Cone/Plate Viscosity at a 500 s-1 Shear Rate has been revised to D7395-18 developed by Committee D01.24, ASTM BOS Volume 06.01.

ASTM D7951 - Standard Specification for Disproportionation (TDP) Toluene has been revised to D7951-18 developed by Committee D16.01, ASTM BOS Volume 06.04.

ASTM D8195 - Standard Classification System and Basis for Specification for Polyethylene Terephthalate Film and Sheeting is a new standard, now available. D8195-18 developed by Committee D20.19, ASTM BOS Volume 08.03.

ASTM D848 - Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons has been revised to D848-18 developed by Committee D16.01, ASTM BOS Volume 06.04.

ASTM D850 - Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials has been revised to D850-18 developed by Committee D16.04, ASTM BOS Volume 06.04.

ASTM E1820 - Standard Test Method for Measurement of Fracture Toughness has been revised to E1820-18 developed by Committee E08.07, ASTM BOS Volume 03.01.

ASTM E2756 - Standard Terminology Relating to Antimicrobial and Antiviral Agents has been revised to E2756-18 developed by Committee E35.15, ASTM BOS Volume 11.08.

ASTM E3135 - Standard Practice for Determining Antimicrobial Efficacy of Ultraviolet Germicidal Irradiation Against Microorganisms on Carriers with Simulated Soil is a new standard, now available. E3135-18 developed by Committee E35.15, ASTM BOS Volume 11.08.

ASTM E3160 - Standard Test Method for Quantitative Evaluation of the Antibacterial Properties of Porous Antibacterial Treated Articles is a new standard, now available. E3160-18 developed by Committee E35.15, ASTM BOS Volume 11.08.

ASTM E3161 - Standard Practice for Preparing a Pseudomonas aeruginosa or Staphylococcus aureusBiofilm using the CDC Biofilm Reactor is a new standard, now available. E3161-18 developed by Committee E35.15, ASTM BOS Volume 11.08.

ASTM E3162 - Standard Practice Measuring the Durability of Antibacterial Agents Applied to Textiles under Simulated Home Laundering Conditions is a new standard, now available. E3162-18 developed by Committee E35.15, ASTM BOS Volume 11.08.

ASTM F1362 - Standard Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials has been revised to F1362-18 developed by Committee F07.08, ASTM BOS Volume 15.03.

ASTM F2731 - Standard Test Method for Measuring the Transmitted and Stored Energy of Firefighter Protective Clothing Systems has been revised to F2731-18 developed by Committee F23.80, ASTM BOS Volume 11.03.

Liên hệ với TechDoc để được hỗ trợ:

Dự thảo Tiêu chuẩn Hoa Kỳ ASTM đang xây dựng

ASTM WK64166 - Standard Specification for Ethylbenzene is a work item revision to existing standard D3193-17

ASTM WK64169 - Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement is a work item revision to existing standard A767/A767M-16

ASTM WK64170 - Standard Test Method for Apparent Density of Rigid Cellular Plastics is a work item revision to existing standard D1622/D1622M-14

ASTM WK64172 - Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel is a work item revision to existing standard D2699-18

ASTM WK64178 - Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air is a work item for the withdrawal of the existing standard D6345-10

ASTM WK64188 - Standard Test Method for Determining the Flow Rate of Water and Suspended Solids from a Geotextile Bag is a work item revision to existing standard D7701-11

ASTM WK64191 - Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)is a work item revision to existing standard D4172-94(2016)

ASTM WK64192 - Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel is a work item revision to existing standard D2700-18

ASTM WK64193 - Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel is a work item revision to existing standard D2699-18

ASTM WK64195 - Standard Test Method for Man-In-Simulant Test (MIST) for Protective Ensembles is a work item revision to existing standard F2588-12

ASTM WK64196 - Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials is a work item revision to existing standard E399-17

ASTM WK64197 - Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil is a work item revision to existing standard B386-03(2011)

ASTM WK64198 - Standard Specification for Ready-Mixed Concrete is a work item revision to existing standard C94/C94M-17a

ASTM WK64199 - Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink) is a work item revision to existing standard C1107/C1107M-17

ASTM WK64203 - Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation is a work item revision to existing standard D3376-14

ASTM WK64204 - Standard Classification for Natural Muscovite Block Mica and Thins Based on Visual Quality is a work item revision to existing standard D351-14

ASTM WK64205 - Standard Test Method for Salt Water Proofness of Insulating Varnishes Over Enamelled Magnet Wire is a work item revision to existing standard D4880-14

ASTM WK64206 - Standard Test Method for Chemical Resistance of Electrical Insulating Varnishes is a work item revision to existing standard D5638-14

ASTM WK64207 - Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes is a work item revision to existing standard D6053-14

ASTM WK64208 - Standard Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications is a work item revision to existing standard D6343-14

ASTM WK64211 - Standard Guide for In-Service Lubricant Viscosity Measurement is a work item revision to existing standard D8185-18

ASTM WK64212 - Standard Terminology for Copper and Copper Alloys is a work item revision to existing standard B846-11a

ASTM WK64213 - Standard Specification for Segmental Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD is a work item revision to existing standard C1786-18

ASTM WK64214 -Test Method for Permanent Deformation Behavior and Rutting Resistance of Compacted Asphalt Mix in the Modified Loaded Wheel Tracker Test

ASTM WK64215 - Standard Test Method for Measurement of Fracture Toughness is a work item revision to existing standard E1820-18