Tra cứu tất cả các loại tiêu chuẩn.

ASTM C1145 - Standard Terminology of Advanced Ceramicshas been editorially changed, available as C1145-06(2013)e1 developed by Committee C28.91, ASTM BOS Volume 15.01.

ASTM C1284 - Standard Practice for Electrodeposition of the Actinides for Alpha Spectrometry has been revised to C1284-18 developed by Committee C26.05, ASTM BOS Volume 12.01.

ASTM C1297 - Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials has been revised to C1297-18 developed by Committee C26.08, ASTM BOS Volume 12.01.

ASTM C1415 - Standard Test Method for 238Pu Isotopic Abundance By Alpha Spectrometry has been revised to C1415-18 developed by Committee C26.05, ASTM BOS Volume 12.01.

ASTM C1617 - Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals has been revised to C1617-18 developed by Committee C16.31, ASTM BOS Volume 04.06.

ASTM C1782/C1782M - Standard Specification for Segmental Concrete Paving Slabs has been revised to C1782/C1782M-18 developed by Committee C15.03, ASTM BOS Volume 04.05.

ASTM C1872 - Standard Test Method for Thermogravimetric Analysis of Hydraulic Cement has been editorially changed, available as C1872-18e2 developed by Committee C01.23, ASTM BOS Volume 04.01.

ASTM C750 - Standard Specification for Nuclear-Grade Boron Carbide Powder has been revised to C750-18 developed by Committee C26.03, ASTM BOS Volume 12.01.

ASTM C752 - Standard Specification for Nuclear-Grade Silver-Indium-Cadmium Alloy has been revised to C752-18 developed by Committee C26.03, ASTM BOS Volume 12.01.

ASTM C888 - Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder has been revised to C888-18 developed by Committee C26.03, ASTM BOS Volume 12.01.

ASTM C946 - Standard Practice for Construction of Dry-Stacked, Surface-Bonded Walls has been revised to C946-18 developed by Committee C12.06, ASTM BOS Volume 04.05.

ASTM D1060 - Standard Practice for Core Sampling of Raw Wool in Packages for Determination of Percentage of Clean Wool Fiber Present has been reapproved, available as D1060-10(2018) developed by Committee D13.13, ASTM BOS Volume 07.01.

ASTM D1187/D1187M - Standard Specification for Asphalt-Base Emulsions for Use as Protective Coatings for Metal has been reapproved, available as D1187/D1187M-97(2018) developed by Committee D08.09, ASTM BOS Volume 04.04.

ASTM D1577 - Standard Test Methods for Linear Density of Textile Fibers has been reapproved, available as D1577-07(2018) developed by Committee D13.58, ASTM BOS Volume 07.01.

ASTM D173/D173M - Standard Specification for Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing has been reapproved, available as D173/D173M-03(2018) developed by Committee D08.04, ASTM BOS Volume 04.04.

ASTM D1907/D1907M - Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Methodhas been reapproved, available as D1907/D1907M-12(2018) developed by Committee D13.58, ASTM BOS Volume 07.01.

ASTM D1976 - Standard Test Method for Elements in Water by Inductively-Coupled Plasma Atomic Emission Spectroscopy has been revised to D1976-18 developed by Committee D19.05, ASTM BOS Volume 11.01.

ASTM D1993 - Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorptionhas been revised to D1993-18 developed by Committee D11.20, ASTM BOS Volume 09.01.

ASTM D2102 - Standard Test Method for Shrinkage of Textile Fibers (Bundle Test) has been reapproved, available as D2102-02(2018) developed by Committee D13.58, ASTM BOS Volume 07.01.

ASTM D2260 - Standard Tables of Conversion Factors and Equivalent Yarn Numbers Measured in Various Numbering Systems has been reapproved, available as D2260-03(2018) developed by Committee D13.58, ASTM BOS Volume 07.01.

ASTM D2454 - Standard Practice for Determining the Effect of Overbaking on Organic Coatings has been revised to D2454-18 developed by Committee D01.27, ASTM BOS Volume 06.01.

ASTM D3038 - Standard Test Method for Drop Shatter Test for Coke has been reapproved, available as D3038-93(2018) developed by Committee D05.15, ASTM BOS Volume 05.06.

ASTM D3474 - Standard Practice for Calibration and Use of Torque Meters Used in Packaging Applications has been reapproved, available as D3474-90(2018) developed by Committee F02.25, ASTM BOS Volume 15.10.

ASTM D4585/D4585M - Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation has been revised to D4585/D4585M-18 developed by Committee D01.27, ASTM BOS Volume 06.01.

ASTM D4814 - Standard Specification for Automotive Spark-Ignition Engine Fuel has been revised to D4814-18b developed by Committee D02.A0.01, ASTM BOS Volume 05.02.

ASTM D5236 - Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method) has been revised to D5236-18a developed by Committee D02.08, ASTM BOS Volume 05.02.

ASTM D5644 - Standard Test Method for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber has been revised to D5644-18 developed by Committee D11.20, ASTM BOS Volume 09.01.

ASTM D584 - Standard Test Method for Wool Content of Raw Wool—Laboratory Scale has been reapproved, available as D584-10(2018) developed by Committee D13.13, ASTM BOS Volume 07.01.

ASTM D5875/D5875M - Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water Quality Monitoring Devices has been revised to D5875/D5875M-18 developed by Committee D18.21, ASTM BOS Volume 04.08.

ASTM D6217 - Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration has been revised to D6217-18 developed by Committee D02.14, ASTM BOS Volume 05.03.

ASTM D6356/D6356M - Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing has been reapproved, available as D6356/D6356M-98(2018) developed by Committee D08.09, ASTM BOS Volume 04.04.

ASTM D6485 - Standard Guide for Risk Characterization of Acute and Irritant Effects of Short-Term Exposure to Volatile Organic Chemicals Emitted from Bedding Setshas been revised to D6485-18 developed by Committee D22.05, ASTM BOS Volume 11.07.

ASTM D6800 - Standard Practice for Preparation of Water Samples Using Reductive Precipitation Preconcentration Technique for ICP-MS Analysis of Trace Metals has been revised to D6800-18 developed by Committee D19.05, ASTM BOS Volume 11.02.

ASTM D7112 - Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection) has been revised to D7112-18 developed by Committee D02.14, ASTM BOS Volume 05.04.

ASTM D7493 - Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection has been reapproved, available as D7493-14(2018) developed by Committee D03.12, ASTM BOS Volume 05.06.

ASTM D7660 - Standard Guide for Conducting Internal Pressure Tests on United Nations (UN) Packagingshas been reapproved, available as D7660-10(2018) developed by Committee D10.22, ASTM BOS Volume 15.10.

ASTM D7728 - Standard Guide for Selection of ASTM Analytical Methods for Implementation of International Cyanide Management Code Guidance has been revised to D7728-18 developed by Committee D19.06, ASTM BOS Volume 11.02.

ASTM D8188 - Standard Test Method for Determination of Density and Relative Density of Asphalt, Semi-Solid Bituminous Materials, and Soft-Tar Pitch by Use of a Digital Density Meter (U-Tube) is a new standard, now available. D8188-18 developed by Committee D04.47, ASTM BOS Volume 04.03.

ASTM D8202 - Standard Specification for Hydraulically Applied 100% Wheat Straw Fiber Mulches is a new standard, now available. D8202-18 developed by Committee D18.25.01, ASTM BOS Volume 04.09.

ASTM D861 - Standard Practice for Use of the Tex System to Designate Linear Density of Fibers, Yarn Intermediates, and Yarns has been reapproved, available as D861-07(2018) developed by Committee D13.58, ASTM BOS Volume 07.01.

ASTM E2663 - Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods has been reapproved, available as E2663-14(2018) developed by Committee E07.11, ASTM BOS Volume 03.04.

ASTM E2767 - Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods has been reapproved, available as E2767-13(2018) developed by Committee E07.11, ASTM BOS Volume 03.04.

ASTM E279 - Standard Test Method for Determination of Abrasion Resistance of Iron Ore Pellets, Lump, and Sinter by the Tumbler Test has been revised to E279-18 developed by Committee E01.02, ASTM BOS Volume 03.05.

ASTM E28 - Standard Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons, by Ring-and-Ball Apparatus has been revised to E28-18 developed by Committee D01.34, ASTM BOS Volume 06.03.

ASTM E2934 - Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Eddy Current (EC) Test Methods has been reapproved, available as E2934-14(2018) developed by Committee E07.11, ASTM BOS Volume 03.04.

ASTM E468 - Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materialshas been revised to E468-18 developed by Committee E08.05, ASTM BOS Volume 03.01.

ASTM F1154 - Standard Practices for Evaluating the Comfort, Fit, Function, and Durability of Protective Ensembles, Ensemble Elements, and Other Components has been revised (with title change) to F1154-18 developed by Committee F23.30, ASTM BOS Volume 11.03.

ASTM F1776 - Standard Specification for Eye Protective Devices for Paintball Sports has been revised to F1776-18 developed by Committee F08.57, ASTM BOS Volume 15.07.

ASTM F2106 - Standard Test Methods for Evaluating Design and Performance Characteristics of Motorized Treadmills has been revised to F2106-18 developed by Committee F08.30, ASTM BOS Volume 15.07.

ASTM F3059 - Standard Specification for Fiber-Reinforced Polymer (FRP) Gratings Used in Marine Construction and Shipbuilding has been revised to F3059-18 developed by Committee F25.03, ASTM BOS Volume 01.08.

ASTM F3180/F3180M - Standard Specification for Low-Speed Flight Characteristics of Aircraft has been revised to F3180/F3180M-18 developed by Committee F44.20, ASTM BOS Volume 15.11.

ASTM C1871 - Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer has been revised to C1871-18a developed by Committee C26.05, ASTM BOS Volume 12.01.

ASTM D7850 - Standard Specification for Biological Properties of Industry Reference Materials (IRM) has been revised to D7850-18 developed by Committee D11.40, ASTM BOS Volume 09.02.

ASTM E604 - Standard Test Method for Dynamic Tear Testing of Metallic Materials has been revised to E604-18 developed by Committee E28.07, ASTM BOS Volume 03.01.

ASTM F1838 - Standard Performance Requirements for Child's Plastic Chairs for Outdoor Use has been reinstated as F1838-18 developed by Committee F15.33, ASTM BOS Volume 15.11.

ASTM F3309/F3309M - Standard Practice for Simplified Safety Assessment of Systems and Equipment in Small Aircraft is a new standard, now available. F3309/F3309M-18 developed by Committee F44.50, ASTM BOS Volume 15.11.

ASTM A1018/A1018M - Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength has been revised to A1018/A1018M-18 developed by Committee A01.19, ASTM BOS Volume 01.03.

ASTM A320/A320M - Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service has been revised to A320/A320M-18 developed by Committee A01.22, ASTM BOS Volume 01.01.

ASTM C1508 - Standard Test Method for Determination of Bromine and Chlorine in UF6 and Uranyl Nitrate by X-Ray Fluorescence (XRF) Spectroscopy has been revised to C1508-18 developed by Committee C26.05, ASTM BOS Volume 12.01.

ASTM D2305 - Standard Test Methods for Polymeric Films Used for Electrical Insulation has been revised to D2305-18 developed by Committee D09.07, ASTM BOS Volume 10.01.

ASTM D5879/D5879M - Standard Practice for Surface Site Characterization for On-Site Septic Systems has been revised to D5879/D5879M-18 developed by Committee D18.01, ASTM BOS Volume 04.09.

ASTM D8163 - Standard Test Method for Determination of Strength of Colorants and Bases for Architectural, Marine, Maintenance, Commercial, and Industrial Coatings has been revised to D8163-18 developed by Committee D01.26, ASTM BOS Volume 06.02.

ASTM D8167/D8167M - Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth) is a new standard, now available. D8167/D8167M-18 developed by Committee D18.08, ASTM BOS Volume 04.09.

ASTM F1194 - Standard Guide for Documenting the Results of Chemical Permeation Testing of Materials Used in Protective Clothing has been revised to F1194-18 developed by Committee F23.30, ASTM BOS Volume 11.03.

ASTM A216/A216M - Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service has been revised to A216/A216M-18 developed by Committee A01.18, ASTM BOS Volume 01.02.

ASTM C1239 - Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics has been reapproved, available as C1239-13(2018) developed by Committee C28.01, ASTM BOS Volume 15.01.

ASTM C840 - Standard Specification for Application and Finishing of Gypsum Board has been revised to C840-18 developed by Committee C11.03, ASTM BOS Volume 04.01.

ASTM C972 - Standard Test Method for Compression-Recovery of Tape Sealant has been revised to C972-18 developed by Committee C24.20, ASTM BOS Volume 04.07.

ASTM D1618 - Standard Test Method for Carbon Black Extractables—Transmittance of Toluene Extract has been revised to D1618-18 developed by Committee D24.31, ASTM BOS Volume 09.01.

ASTM D2000 - Standard Classification System for Rubber Products in Automotive Applications has been revised to D2000-18 developed by Committee D11.30, ASTM BOS Volume 09.02.

ASTM D3336 - Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatureshas been revised to D3336-18 developed by Committee D02.G0.05, ASTM BOS Volume 05.01.

ASTM D3829 - Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil has been revised to D3829-18 developed by Committee D02.07, ASTM BOS Volume 05.02.

ASTM D4527 - Standard Test Method for Carbon Black—Solvent Extractables has been revised to D4527-18 developed by Committee D24.31, ASTM BOS Volume 09.01.

ASTM D4684 - Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature has been revised to D4684-18 developed by Committee D02.07, ASTM BOS Volume 05.02.

ASTM D4741 - Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer has been revised to D4741-18 developed by Committee D02.07, ASTM BOS Volume 05.02.

ASTM D5042 - Standard Test Method for Estimating the Organic Fouling of Particulate Anion Exchange Resins (Withdrawn 2018) has been withdrawn, with no replacement. D5042-90(2009) developed by Committee D19.08, ASTM BOS Volume 11.02.

ASTM D5148 - Standard Test Method for Centrifuge Kerosine Equivalent (Withdrawn 2018) has been withdrawn, with no replacement. D5148-10 developed by Committee D04.51, ASTM BOS Volume 04.03.

ASTM D5261 - Standard Test Method for Measuring Mass per Unit Area of Geotextiles has been reapproved, available as D5261-10(2018) developed by Committee D35.01, ASTM BOS Volume 04.13.

ASTM D6196 - Standard Practice for Choosing Sorbents, Sampling Parameters and Thermal Desorption Analytical Conditions for Monitoring Volatile Organic Chemicals in Air has been editorially changed, available as D6196-15e1 developed by Committee D22.05, ASTM BOS Volume 11.07.

ASTM D6708 - Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material has been revised to D6708-18 developed by Committee D02.94, ASTM BOS Volume 05.03.

ASTM D6821 - Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer has been revised to D6821-18 developed by Committee D02.07, ASTM BOS Volume 05.03.

ASTM D6890 - Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber has been editorially changed, available as D6890-16e2 developed by Committee D02.01, ASTM BOS Volume 05.05.

ASTM D6896 - Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature has been revised to D6896-18 developed by Committee D02.07, ASTM BOS Volume 05.03.

ASTM D7198 - Standard Specification for Disposable Embalming Gloves for Single-Use Applications has been reapproved, available as D7198-05(2018) developed by Committee D11.40, ASTM BOS Volume 09.02.

ASTM D7279 - Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer has been revised to D7279-18 developed by Committee D02.07, ASTM BOS Volume 05.04.

ASTM D7663 - Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations has been reapproved (with editorial change), available as D7663-12(2018)e1 developed by Committee D18.21, ASTM BOS Volume 04.09.

ASTM D7724 - Standard Test Method for Carbon Black—Non-Dispersible Matter by Mechanical Flushing (NDM)has been revised to D7724-18 developed by Committee D24.31, ASTM BOS Volume 09.01.

ASTM D8045 - Standard Test Method for Acid Number of Crude Oils and Petroleum Products by Catalytic Thermometric Titration has been editorially changed, available as D8045-17e1 developed by Committee D02.06, ASTM BOS Volume 05.05.

ASTM D8125 - Standard Specification for Re-Refined Engine Oil Bottoms (REOB)/Vacuum Tower Asphalt Extender (VTAE) has been revised to D8125-18 developed by Committee D04.40, ASTM BOS Volume 04.03.

ASTM D8145 - Standard Practice for Sampling of Green Petroleum Coke is a new standard, now available. D8145-18 developed by Committee D02.05.0D, ASTM BOS Volume 05.05.

ASTM D8182 - Standard Test Method for Alloy Classification of Wear Debris using Laser-Induced Breakdown Spectroscopy (LIBS) is a new standard, now available. D8182-18 developed by Committee D02.96.06, ASTM BOS Volume 05.05.

ASTM E119 - Standard Test Methods for Fire Tests of Building Construction and Materials has been revised to E119-18a developed by Committee E05.11, ASTM BOS Volume 04.07.

ASTM E3143 - Standard Practice for Performing Cryo-Transmission Electron Microscopy of Liposomes has been revised to E3143-18a developed by Committee E56.02, ASTM BOS Volume 14.02.

ASTM E549 - Standard Guide for Preparing Field Sprayer Calibration Procedures has been reapproved, available as E549-87(2018) developed by Committee E35.22, ASTM BOS Volume 11.08.

ASTM F2337 - Standard Test Method for Treestand Fall Arrest System has been revised to F2337-18 developed by Committee F08.18, ASTM BOS Volume 15.07.

ASTM F2994 - Standard Practice for Utilization of Mobile, Automated Cured-In-Place Pipe (CIPP) Impregnation Systems has been revised to F2994-18 developed by Committee F17.67, ASTM BOS Volume 08.04.

ASTM F3312/F3312M - Standard Practice for Liquefied Natural Gas (LNG) Bunkering Hose Transfer Assemblyis a new standard, now available. F3312/F3312M-18 developed by Committee F25.11, ASTM BOS Volume 01.08.

ASTM A488/A488M - Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnelhas been revised to A488/A488M-18 developed by Committee A01.18, ASTM BOS Volume 01.02.

ASTM C1063 - Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster has been revised to C1063-18b developed by Committee C11.03, ASTM BOS Volume 04.01.

ASTM C1293 - Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction has been revised to C1293-18 developed by Committee C09.50, ASTM BOS Volume 04.02.

ASTM C1341 - Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites has been reapproved, available as C1341-13(2018) developed by Committee C28.07, ASTM BOS Volume 15.01.

ASTM C1554 - Standard Guide for Materials Handling Equipment for Hot Cells has been revised to C1554-18 developed by Committee C26.14, ASTM BOS Volume 12.01.

ASTM C1872 - Standard Test Method for Thermogravimetric Analysis of Hydraulic Cement has been editorially changed, available as C1872-18e1 developed by Committee C01.23, ASTM BOS Volume 04.01.

ASTM C806 - Standard Test Method for Restrained Expansion of Expansive Cement Mortar has been revised to C806-18 developed by Committee C01.13, ASTM BOS Volume 04.01.

ASTM C845/C845M - Standard Specification for Expansive Hydraulic Cement has been revised to C845/C845M-18 developed by Committee C01.13, ASTM BOS Volume 04.01.

ASTM D1411 - Standard Test Methods for Water-Soluble Chlorides Present as Admixtures in Graded Aggregate Road Mixes (Withdrawn 2018) has been withdrawn, with no replacement. D1411- developed by Committee D18.15, ASTM BOS Volume 04.08.

ASTM D154 - Standard Guide for Testing Varnishes (Withdrawn 2018) has been withdrawn, with no replacement. D154- developed by Committee D01.33, ASTM BOS Volume 06.03.

ASTM D3527 - Standard Test Method for Life Performance of Automotive Wheel Bearing Grease has been revised to D3527-18 developed by Committee D02.G0.05, ASTM BOS Volume 05.01.

ASTM D4236 - Standard Practice for Labeling Art Materials for Chronic Health Hazards has been editorially changed, available as D4236-94(2016)e1 developed by Committee D01.57, ASTM BOS Volume 06.02.

ASTM D5102 - Standard Test Method for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures (Withdrawn 2018) has been withdrawn, with no replacement. D5102- developed by Committee D18.15, ASTM BOS Volume 04.08.

ASTM D5323 - Standard Practice for Determination of 2 % Secant Modulus for Polyethylene Geomembranes has been reapproved, available as D5323-92(2018) developed by Committee D35.10, ASTM BOS Volume 04.13.

ASTM D8206 - Standard Test Method for Oxidation Stability of Lubricating Greases—Rapid Small-Scale Oxidation Test (RSSOT) is a new standard, now available. D8206-18 developed by Committee D02.09.0E, ASTM BOS Volume 05.05.

ASTM E1258 - Standard Test Method for Airflow Calibration of Fan Pressurization Devices has been reapproved, available as E1258-88(2018) developed by Committee E06.41, ASTM BOS Volume 04.11.

ASTM E1554/E1554M - Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization has been reapproved, available as E1554/E1554M-13(2018) developed by Committee E06.41, ASTM BOS Volume 04.11.

ASTM E196 - Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs has been reapproved, available as E196-06(2018) developed by Committee E06.11, ASTM BOS Volume 04.11.

ASTM E1998 - Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances has been reapproved, available as E1998-11(2018) developed by Committee E06.41, ASTM BOS Volume 04.11.

ASTM E2126 - Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings has been reapproved, available as E2126-11(2018) developed by Committee E06.11, ASTM BOS Volume 04.11.

ASTM E2413 - Standard Guide for Hospital Preparedness and Response (Withdrawn 2018) has been withdrawn, with no replacement. E2413-04(2009) developed by Committee E54.02, ASTM BOS Volume 15.08.

ASTM E2824 - Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetric Method has been revised to E2824-18 developed by Committee E01.05, ASTM BOS Volume 03.05.

ASTM E3172 - Standard Guide for Reporting Production Information and Data for Nano-Objects is a new standard, now available. E3172-18 developed by Committee E56.01, ASTM BOS Volume 14.02.

ASTM E529 - Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction has been reapproved, available as E529-04(2018) developed by Committee E06.11, ASTM BOS Volume 04.11.

ASTM E564 - Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings has been reapproved, available as E564-06(2018) developed by Committee E06.11, ASTM BOS Volume 04.11.

ASTM E575 - Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies has been reapproved, available as E575-05(2018) developed by Committee E06.11, ASTM BOS Volume 04.11.

ASTM F1615 - Standard Specification for Cautionary Labeling for Five-Gallon Open-Head Plastic Containers (Withdrawn 2018) has been withdrawn, with no replacement. F1615-95(2009) developed by Committee F15.31, ASTM BOS Volume 15.11.

ASTM F1816 - Standard Safety Specification for Drawstrings on Children's Upper Outerwear (Withdrawn 2018) has been withdrawn, with no replacement. F1816-97(2009) developed by Committee F15.37, ASTM BOS Volume 15.11.

ASTM F2094/F2094M - Standard Specification for Silicon Nitride Bearing Balls has been revised to F2094/F2094M-18a developed by Committee F34.01, ASTM BOS Volume 01.09.

ASTM F2130 - Standard Test Method for Measuring Repellency, Retention, and Penetration of Liquid Pesticide Formulation Through Protective Clothing Materials has been reapproved, available as F2130-11(2018) developed by Committee F23.30, ASTM BOS Volume 11.03.

ASTM F2283 - Standard Specification for Shipboard Oil Pollution Abatement System has been reapproved, available as F2283-12(2018) developed by Committee F25.06, ASTM BOS Volume 01.08.

ASTM F2669 - Standard Performance Specification for Protective Clothing Worn by Operators Applying Pesticides has been reapproved, available as F2669-12(2018) developed by Committee F23.30, ASTM BOS Volume 11.03.

ASTM F2730/F2730M - Standard Specification for Silicon Nitride Cylindrical Bearing Rollers has been revised to F2730/F2730M-18 developed by Committee F34.01, ASTM BOS Volume 01.09.

ASTM F3117 - Standard Specification for Crew Interface in Aircraft has been revised to F3117-18b developed by Committee F44.10, ASTM BOS Volume 15.11.

ASTM F3317 - Standard Consumer Safety Specification for Infant Floor Seats has been editorially changed, available as F3317-18e1 developed by Committee F15.16, ASTM BOS Volume 15.11.

ASTM F446 - Standard Consumer Safety Specification for Grab Bars and Accessories Installed in the Bathing Area (Withdrawn 2018) has been withdrawn, with no replacement. F446-85(2009) developed by Committee F15.03, ASTM BOS Volume 15.11.

ASTM F716 - Standard Test Methods for Sorbent Performance of Absorbents (Withdrawn 2018) has been withdrawn, with no replacement. F716- developed by Committee F20.22, ASTM BOS Volume 11.08.

ASTM F903 - Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids has been revised to F903-18 developed by Committee F23.30, ASTM BOS Volume 11.03.

ASTM G187 - Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Methodhas been revised to G187-18 developed by Committee G01.10, ASTM BOS Volume 03.02.

Liên hệ với TechDoc để được hỗ trợ: