Loading data. Please wait
Loading data. Please wait
Xem thêm:
Tiêu chuẩn Châu Âu (EN) là gì?
Bộ Tiêu chuẩn EN Eurocodes về Kết cấu Xây dựng
Lý do chính của việc tiêu chuẩn hóa trong lĩnh vực Thép là để đảm bảo có ngôn ngữ chung giữa nhà sản xuất và khách hàng về sản phẩm thép. Từ đầu thế kỷ 20, các nước đã xây dựng tiêu chuẩn riêng để xác định và phân loại sản phẩm thép. Ủy ban Tiêu chuẩn Châu Âu (CEN) được Liên minh Châu Âu chính thức công nhận là Cơ quan tiêu chuẩn Châu Âu.
Dưới đây là Danh mục các Tiêu chuẩn Châu Âu (EN) về Thép Kết cấu và Xây dựng.
|
Số hiệu |
Năm |
Tên tiêu chuẩn |
Tình trạng |
|
1994 |
Non-alloy steel rod for drawing and/or cold rolling - Part 1: General requirements |
|
|
|
1995 |
Non-alloy steel rod for drawing and/or cold rolling - Part 2: Specific requirements for general purposes rod |
|
|
|
1995 |
Non-alloy steel rod for drawing and/or cold rolling - Part 3: Specific requirements for rimmed and rimmed substitute low carbon steel rod |
|
|
|
1995 |
Non-alloy steel rod for drawing and/or cold rolling - Part 4: Specific requirements for rod for special applications |
|
|
|
2004 |
Steel rod for drawing and/or cold rolling - Dimensions and tolerances |
|
|
|
2000 |
Definition and classification of grades of steel |
|
|
|
2006 |
General technical delivery conditions for steel products |
|
|
|
1995 |
Hot rolled taper flange I sections - Tolerances on shape and dimensions |
|
|
|
1993 |
Hot rolled products of non-alloy structural steels; technical delivery conditions |
Thay thế bởi EN 10025-1/2004; 10025-2/2004 |
|
|
2004 |
Hot rolled products of structural steels - Part 1: General technical delivery conditions |
|
|
|
2004 |
Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels |
|
|
|
2004 |
Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels |
|
|
|
2004 |
Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels |
|
|
|
2004 |
Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance |
|
|
|
2004 |
Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition |
|
|
|
EN 10028-1 |
2007 |
Flat products made of steels for pressure purposes - Part 1: General requirements |
|
|
EN 10028-2 |
2009 |
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
|
|
EN 10028-3 |
2009 |
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized |
|
|
EN 10028-4 |
2009 |
Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties |
|
|
EN 10028-5 |
2009 |
Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled |
|
|
EN 10028-6 |
2009 |
Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered |
|
|
EN 10028-7 |
2007 |
Flat products made of steels for pressure purposes - Part 7: Stainless steels |
|
|
EN 10029 |
1991 |
Hot rolled steel plates 3 mm thick or above - Tolerances on dimensions, shape and mass |
|
|
EN 10031 |
2003 |
Semi-finished products for forging - Tolerances on dimensions shape and mass |
|
|
EN 10034 |
1993 |
Structural steel I and H sections - Tolerances on shape and dimensions |
|
|
EN 10048 |
1996 |
Hot rolled narrow steel strip - Tolerances on dimensions and shape |
|
|
EN 10051 |
1997 |
Continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels - Tolerances on dimensions and shape |
|
|
EN 10055 |
1995 |
Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions |
|
|
EN 10056-1 |
1998 |
Structural steel equal and unequal leg angles - Part 1: Dimensions |
|
|
EN 10056-2 |
1993 |
Structural steel equal and unequal leg angles - Part 2: Tolerances on shape and dimensions |
|
|
EN 10058 |
2003 |
Hot rolled flat steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
|
|
EN 10059 |
2003 |
Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
|
|
EN 10060 |
2003 |
Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
|
|
EN 10061 |
2003 |
Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
|
|
EN 10067 |
1996 |
Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass |
|
|
EN 10080 |
2005 |
Steel for the reinforcement of concrete - Weldable reinforcing steel – General |
|
|
EN 10083-1 |
2006 |
Steels for quenching and tempering - Part 1: General technical delivery conditions |
|
|
EN 10083-2 |
2006 |
Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
|
|
EN 10083-3 |
2006 |
Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels |
|
|
EN 10084 |
2008 |
Case hardening steels - Technical delivery conditions |
|
|
EN 10085 |
2001 |
Nitriding steels - Technical delivery conditions |
|
|
EN 10087 |
1998 |
Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods |
|
|
EN 10089 |
2002 |
Hot-rolled steels for quenched and tempered springs - Technical delivery conditions |
|
|
EN 10090 |
1998 |
Valve steels and alloys for internal combustion engines |
|
|
EN 10092-1 |
2003 |
Hot rolled spring steel flat bars - Part 1: Flat bars - Dimensions and tolerances on shape and dimensions |
|
|
EN 10092-2 |
2003 |
Hot rolled spring steel flat bars - Part 2: Ribbed and grooved spring leaves - Dimensions and tolerances on shape and dimensions |
|
|
EN 10108 |
2004 |
Round steel rod for cold heading and cold extrusion - Dimensions and tolerances |
|
|
EN 10111 |
2008 |
Continuously hot-rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions |
|
|
EN 10113-2 |
1993 |
Hot-rolled products in weldable fine grain structural steels - Part 2: delivery conditions for normalized rolled steels |
Thay thế bởi EN 10025-1:2004; EN 10025-3:2004 |
|
EN 10113-3 |
1993 |
Hot-rolled products in weldable fine grain structural steels - Part 3: delivery conditions for thermomechanically rolled steels |
Thay thế bởi EN 10025-1:2004; EN 10025-4:2004 |
|
EN 10120 |
2008 |
Steel sheet and strip for welded gas cylinders |
|
|
EN 10130 |
2006 |
Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions |
|
|
EN 10131 |
2006 |
Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape |
|
|
EN 10132-1 |
2000 |
Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 1: General |
|
|
EN 10132-2 |
2000 |
Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 2: Case hardening steels |
|
|
EN 10132-3 |
2000 |
Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 3: Steels for quenching and tempering |
|
|
EN 10132-4 |
2000 |
Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 4: Spring steels and other applications |
|
|
EN 10137-2 |
1995 |
Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 2: Delivery conditions for quenched and tempered steels |
Thay thế bởi EN 10025-1:2004; EN 10025-6:2004 |
|
EN 10137-3 |
1995 |
Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 3: Delivery conditions for precipitation hardened steels |
Hủy bỏ năm 2000 |
|
EN 10139 |
1997 |
Cold rolled uncoated mild steel narrow strip for cold forming - Technical delivery conditions |
|
|
EN 10140 |
2006 |
Cold rolled narrow steel strip - Tolerances on dimensions and shape |
|
|
EN 10149-1 |
1995 |
Hot-rolled flat products made of high yield strength steels for cold forming - Part 1: General delivery conditions |
|
|
EN 10149-2 |
1995 |
Hot-rolled flat products made of high yield strength steels for cold forming - Part 2: Delivery conditions for thermomechanically rolled steels |
|
|
EN 10149-3 |
1995 |
Hot-rolled flat products made of high yield strength steels for cold forming - Part 3: Delivery conditions for normalized or normalized rolled steels |
|
|
EN 10155 |
1993 |
Structural steels with improved atmospheric corrosion resistance - Technical delivery conditions |
Thay thế bởi EN 10025-5:2004 |
|
EN 10162 |
2003 |
Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances |
|
|
EN 10163-1 |
2004 |
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements |
|
|
EN 10163-2 |
2004 |
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats |
|
|
EN 10163-3 |
2004 |
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections |
|
|
EN 10164 |
2004 |
Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions |
|
|
EN 10168 |
2004 |
Steel products - Inspection documents - List of information and description |
|
|
EN 10207 |
2005 |
Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars |
|
|
EN 10208-1 |
2009 |
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A |
|
|
EN 10208-2 |
2009 |
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
|
|
EN 10209 |
1996 |
Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions |
|
|
EN 10210-1 |
2006 |
Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
|
|
EN 10210-2 |
2006 |
Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties |
|
|
EN 10216-1 |
2002 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
|
|
EN 10216-2 |
2002 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
|
|
EN 10216-3 |
2002 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
|
|
EN 10216-4 |
2002 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties |
|
|
EN 10216-5 |
2004 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
|
|
EN 10217-1 |
2002 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
|
|
EN 10217-2 |
2002 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties |
|
|
EN 10217-3 |
2002 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
|
|
EN 10217-4 |
2002 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties |
|
|
EN 10217-5 |
2002 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties |
|
|
EN 10217-6 |
2002 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties |
|
|
EN 10217-7 |
2005 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
|
|
EN 10219-1 |
2006 |
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
|
|
EN 10219-2 |
2006 |
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties |
|
|
EN 10220 |
2002 |
Seamless and welded steel tubes - Dimensions and masses per unit length |
|
|
EN 10221 |
1995 |
Surface quality classes for hot-rolled bars and rods - Technical delivery conditions |
|
|
EN 10223-2 |
1997 |
Steel wire and wire products for fences - Part 2: Hexagonal steel wire netting for agricultural, insulation and fencing purposes |
|
|
EN 10223-3 |
1997 |
Steel wire and wire products for fences - Part 3: Hexagonal steel wire netting for engineering purposes |
|
|
EN 10223-4 |
1998 |
Steel wire and wire products for fences - Part 4: Steel wire welded mesh fencing |
|
|
EN 10223-5 |
1998 |
Steel wire and wire products for fences - Part 5: Steel wire woven hinged joint and knotted mesh fencing |
|
|
EN 10223-6 |
1998 |
Steel wire and wire products for fences - Part 6: Steel wire chain link fencing |
|
|
EN 10223-7 |
2002 |
Steel wire and wire products for fences - Part 7: Steel wire welded panels - For fencing |
|
|
EN 10224 |
2002 |
Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids - Technical delivery conditions |
|
|
EN 10225 |
2001 |
Weldable structural steels for fixed offshore structures - Technical delivery conditions |
|
|
EN 10229 |
1998 |
Evaluation of resistance of steel products to hydrogen induced cracking (HIC) |
|
|
EN 10238 |
2009 |
Automatically blast-cleaned and automatically prefabricated primed structural steel products |
|
|
EN 10248-1 |
1995 |
Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions |
|
|
EN 10248-2 |
1995 |
Hot rolled sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions |
|
|
EN 10249-1 |
1995 |
Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions |
|
|
EN 10249-2 |
1995 |
Cold formed sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions |
|
|
EN 10255 |
2004 |
Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions |
|
|
EN 10263-1 |
2001 |
Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions |
|
|
EN 10263-2 |
2001 |
Steel rod, bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working |
|
|
EN 10263-3 |
2001 |
Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels |
|
|
EN 10263-4 |
2001 |
Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering |
|
|
EN 10263-5 |
2001 |
Steel rod, bars and steel wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels |
|
|
EN 10264-1 |
2002 |
Steel wire and wire products - Steel wire for ropes - Part 1: General requirements |
|
|
EN 10264-2 |
2002 |
Steel wire and wire products - Steel wire for ropes - Part 2: Cold drawn non alloy steel wire for ropes for general applications |
|
|
EN 10264-3 |
2002 |
Steel wire and wire products - Steel wire for ropes - Part 3: Round and shaped non alloyed steel wire for high duty applications |
|
|
EN 10264-4 |
2002 |
Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire |
|
|
EN 10266 |
2003 |
Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards |
|
|
EN 10267 |
1998 |
Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures |
|
|
EN 10268 |
2006 |
Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions |
|
|
EN 10269 |
2008 |
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
|
|
EN 10270-1 |
2001 |
Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire |
|
|
EN 10270-2 |
2001 |
Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire |
|
|
EN 10273 |
2007 |
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
|
|
EN 10277-1 |
2008 |
Bright steel products - Technical delivery conditions - Part 1: General |
|
|
EN 10277-2 |
2008 |
Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes |
|
|
EN 10277-3 |
2008 |
Bright steel products - Technical delivery conditions - Part 3: Free-cutting steels |
|
|
EN 10277-4 |
2008 |
Bright steel products - Technical delivery conditions - Part 4: Case-hardening steels |
|
|
EN 10277-5 |
2008 |
Bright steel products - Technical delivery conditions - Part 5: Steels for quenching and tempering |
|
|
EN 10278 |
1999 |
Dimensions and tolerances of bright steel products |
|
|
EN 10279 |
2000 |
Hot rolled steel channels - Tolerances on shape, dimensions and mass |
|
|
EN 10294-1 |
2005 |
Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels |
|
|
EN 10296-1 |
2003 |
Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
|
|
EN 10297-1 |
2003 |
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
|
|
EN 10305-1 |
2002 |
Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes |
|
|
EN 10305-2 |
2002 |
Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes |
|
|
EN 10305-3 |
2002 |
Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
|
|
EN 10305-4 |
2003 |
Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
|
|
EN 10305-5 |
2003 |
Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded and cold sized square and rectangular tubes |
|
|
EN 10305-6 |
2005 |
Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
|
|
EN 10323 |
2004 |
Steel wire and wire products - Bead wire |
|
|
EN 10324 |
2004 |
Steel wire and wire products - Hose reinforcement wire |
|
|
EN 10341 |
2006 |
Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state |
|
|
EN 12385-1 |
2002 |
Steel wire ropes - Safety - Part 1: General requirements |
|
|
EN 12385-10 |
2003 |
Steel wire ropes - Safety - Part 10: Spiral ropes for general structural applications |
|
|
EN 12385-2 |
2002 |
Steel wire ropes - Safety - Part 2: Definitions, designation and classification |
|
|
EN 12385-3 |
2004 |
Steel wire ropes - Safety - Part 3: Information for use and maintenance |
|
|
EN 12385-5 |
2002 |
Steel wire ropes - Safety - Part 5: Stranded ropes for lifts |
|
|
EN 12385-6 |
2004 |
Steel wire ropes - Safety - Part 6: Stranded ropes for mine shafts |
|
|
EN 12385-7 |
2002 |
Steel wire ropes - Safety - Part 7: Locked coil ropes for mine shafts |
|
|
EN 12385-8 |
2002 |
Steel wire ropes - Safety - Part 8: Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons |
|
|
EN 12385-9 |
2002 |
Steel wire ropes - Safety - Part 9: Locked coil carrying ropes for cableway installations designed to carry persons |
|
|
EN 12952-2 |
2001 |
Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
|
|
EN 13173 |
2001 |
Cathodic protection for steel offshore floating structures |
|
|
EN 13174 |
2001 |
Cathodic protection for harbour installations |
|
|
ENV 10080 |
1995 |
Steel for the reinforcement of concrete - Weldable ribbed reinforcing steel B 500 - Technical delivery conditions for bars, coils and welded fabric |
Thay thế bởi EN 10080:2005 |
Tiêu chuẩn và Quy định kỹ thuật của ASTM thể hiện sự đồng thuận giữa các nhà sản xuất, nhà sản xuất, nhà chế tạo và...
Quy định kỹ thuật của ASTM thể hiện sự đồng thuận giữa các nhà sản xuất, nhà sản xuất, nhà chế tạo và người sử dụng các...
Quy định kỹ thuật của ASTM thể hiện sự đồng thuận giữa các nhà sản xuất, nhà sản xuất, nhà chế tạo và người sử dụng các...
Quy định kỹ thuật của ASTM thể hiện sự đồng thuận giữa các nhà sản xuất, nhà sản xuất, nhà chế tạo và người sử dụng các...
EN Eurocodes là một bộ gồm 10 Tiêu chuẩn Châu Âu cung cấp một cách tiếp cận chung cho việc thiết kế các tòa nhà, các...
Bộ Eurocodes được tạo thành từ 10 Tiêu chuẩn Châu Âu về thiết kế kết cấu và mỗi Eurocode bao gồm các khía cạnh kỹ thuật...
Đây là tài liệu đưa ra các hướng dẫn dựa vào những yêu cầu cơ bản về luật định của các Quy định FDA Hoa Kỳ mà tất cả các nhà sản xuất và nhập khẩu cần phải xem xét khi có ý định tham gia thị trường...
NBBI NB23-2017, National Board Inspection Code - NBIC, 2017 Edition (Four Volumes)
The 23rd edition of Standard Methods for the Examination of Water and Wastewater
.png)
.jpg){kind=logo}
.jpg){kind=logo}
-_-logo.png){kind=logo}
