Tra cứu tất cả các loại tiêu chuẩn.

ASTM C1716/C1716M - Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prismshas been revised to C1716/C1716M-18 developed by Committee C15.04, ASTM BOS Volume 04.05.

ASTM C780 - Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry has been revised to C780-18 developed by Committee C12.02, ASTM BOS Volume 04.05.

ASTM D1488 - Standard Test Method for Amylaceous Matter in Adhesives has been reapproved, available as D1488-00(2018) developed by Committee D14.30, ASTM BOS Volume 15.06.

ASTM D1490 - Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions has been reapproved, available as D1490-01(2018) developed by Committee D14.30, ASTM BOS Volume 15.06.

ASTM D1579 - Standard Test Method for Filler Content of Phenol, Resorcinol, and Melamine Adhesives has been reapproved, available as D1579-01(2018) developed by Committee D14.30, ASTM BOS Volume 15.06.

ASTM D1583 - Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films has been reapproved, available as D1583-01(2018) developed by Committee D14.30, ASTM BOS Volume 15.06.

ASTM D2414 - Standard Test Method for Carbon Black—Oil Absorption Number (OAN) has been revised to D2414-18 developed by Committee D24.11, ASTM BOS Volume 09.01.

ASTM D2559 - Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions has been reapproved, available as D2559-12a(2018) developed by Committee D14.30, ASTM BOS Volume 15.06.

ASTM D3222 - Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials has been revised to D3222-18a developed by Committee D20.15, ASTM BOS Volume 08.02.

ASTM D3230 - Standard Test Method for Salts in Crude Oil (Electrometric Method) has been reapproved, available as D3230-13(2018) developed by Committee D02.03, ASTM BOS Volume 05.01.

ASTM D3434 - Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives has been reapproved, available as D3434-00(2018) developed by Committee D14.30, ASTM BOS Volume 15.06.

ASTM D3493 - Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN)has been revised to D3493-18 developed by Committee D24.11, ASTM BOS Volume 09.01.

ASTM D4261 - Standard Practice for Surface Cleaning Concrete Masonry Units for Coating has been reapproved, available as D4261-05(2018) developed by Committee D33.05, ASTM BOS Volume 06.02.

ASTM D4262 - Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces has been reapproved, available as D4262-05(2018) developed by Committee D33.05, ASTM BOS Volume 06.02.

ASTM D4263 - Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method has been reapproved, available as D4263-83(2018) developed by Committee D33.05, ASTM BOS Volume 06.02.

ASTM D4285 - Standard Test Method for Indicating Oil or Water in Compressed Air has been reapproved, available as D4285-83(2018) developed by Committee D33.05, ASTM BOS Volume 06.02.

ASTM D4391 - Standard Terminology Relating to The Burning Behavior of Textiles has been revised to D4391-18a developed by Committee D13.92, ASTM BOS Volume 07.01.

ASTM D4537 - Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating and Lining Work Inspection in Nuclear Facilities has been reapproved, available as D4537-12(2018) developed by Committee D33.04, ASTM BOS Volume 06.02.

ASTM D4619 - Standard Practice for Inspection of Linings in Operating Flue Gas Desulfurization Systems has been reapproved, available as D4619-12(2018) developed by Committee D33.09, ASTM BOS Volume 06.02.

ASTM D4689 - Standard Specification for Adhesive, Casein-Type has been reapproved, available as D4689-12(2018) developed by Committee D14.30, ASTM BOS Volume 15.06.

ASTM D4690 - Standard Specification for Urea-Formaldehyde Resin Adhesives has been reapproved, available as D4690-12(2018) developed by Committee D14.30, ASTM BOS Volume 15.06.

ASTM D4806 - Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel has been revised to D4806-18 developed by Committee D02.A0.02, ASTM BOS Volume 05.02.

ASTM D4845 - Standard Terminology Relating to Wool has been reapproved, available as D4845-10(2018) developed by Committee D13.13, ASTM BOS Volume 07.02.

ASTM D4890 - Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols has been revised to D4890-18 developed by Committee D20.22, ASTM BOS Volume 08.03.

ASTM D5498 - Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities has been reapproved, available as D5498-12a(2018) developed by Committee D33.04, ASTM BOS Volume 06.02.

ASTM D5575 - Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers has been revised to D5575-18 developed by Committee D20.15, ASTM BOS Volume 08.03.

ASTM D578/D578M - Standard Specification for Glass Fiber Strands has been revised to D578/D578M-18 developed by Committee D13.18, ASTM BOS Volume 07.01.

ASTM D6137 - Standard Test Method for Sulfuric Acid Resistance of Polymer Linings for Flue Gas Desulfurization Systems has been reapproved, available as D6137-97(2018) developed by Committee D33.09, ASTM BOS Volume 06.02.

ASTM D6201 - Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation has been revised to D6201-18 developed by Committee D02.A0.01, ASTM BOS Volume 05.03.

ASTM D6638 - Standard Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks) has been revised to D6638-18 developed by Committee D35.01, ASTM BOS Volume 04.13.

ASTM D6916 - Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks) has been revised to D6916-18 developed by Committee D35.01, ASTM BOS Volume 04.13.

ASTM D6979 - Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen has been revised to D6979-18 developed by Committee D20.22, ASTM BOS Volume 08.03.

ASTM D7109 - Standard Test Method for Shear Stability of Polymer-Containing Fluids Using a European Diesel Injector Apparatus at 30 Cycles and 90 Cycles has been revised (with title change) to D7109-18 developed by Committee D02.07, ASTM BOS Volume 05.04.

ASTM D7167 - Standard Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant has been reapproved, available as D7167-12(2018) developed by Committee D33.04, ASTM BOS Volume 06.02.

ASTM D7212 - Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter has been reapproved, available as D7212-13(2018) developed by Committee D02.03, ASTM BOS Volume 05.04.

ASTM D7329 - Standard Specification for Food Preparation and Food Handling (Food Service) Gloves has been reapproved, available as D7329-07(2018) developed by Committee D11.40, ASTM BOS Volume 09.02.

ASTM D7487 - Standard Practice for Polyurethane Raw Materials: Polyurethane Foam Cup Test has been revised to D7487-18 developed by Committee D20.22, ASTM BOS Volume 08.03.

ASTM D7794 - Standard Practice for Blending Mid-Level Ethanol Fuel Blends for Flexible-Fuel Vehicles with Automotive Spark-Ignition Engines has been revised to D7794-18 developed by Committee D02.A0.02, ASTM BOS Volume 05.05.

ASTM D7862 - Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel has been revised to D7862-18 developed by Committee D02.A0, ASTM BOS Volume 05.05.

ASTM D8137 - Practice for Accelerated Aging of Leather is a new standard, now available. D8137-18 developed by Committee D31.05, ASTM BOS Volume 15.04.

ASTM D865 - Standard Test Method for Rubber—Deterioration by Heating in Air (Test Tube Enclosure)has been reapproved, available as D865-11(2018) developed by Committee D11.15, ASTM BOS Volume 09.01.

ASTM D92 - Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester has been revised to D92-18 developed by Committee D02.08, ASTM BOS Volume 05.01.

ASTM D93 - Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester has been revised to D93-18 developed by Committee D02.08, ASTM BOS Volume 05.01.

ASTM E1901 - Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods has been revised to E1901-18 developed by Committee E07.06, ASTM BOS Volume 03.03.

ASTM E1942 - Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing has been reapproved (with editorial change), available as E1942-98(2018)e1 developed by Committee E08.03, ASTM BOS Volume 03.01.

ASTM E2263 - Standard Test Method for Paired Preference Test has been reapproved, available as E2263-12(2018) developed by Committee E18.04, ASTM BOS Volume 15.08.

ASTM E2443 - Standard Guide for Verifying Computer-Generated Test Results Through The Use Of Standard Data Sets has been reapproved (with editorial change), available as E2443-05(2018)e1 developed by Committee E08.03, ASTM BOS Volume 03.01.

ASTM E3169 - Standard Guide for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) is a new standard, now available. E3169-18 developed by Committee E07.11, ASTM BOS Volume 03.04.

ASTM F1062 - Standard Test Method for Verification of Ski Binding Test Devices has been reapproved, available as F1062-97(2018) developed by Committee F27.10, ASTM BOS Volume 15.07.

ASTM F1063 - Standard Practice for Functional Inspections and Adjustments of Alpine Ski/Binding/Boot Systemshas been reapproved, available as F1063-09(2018) developed by Committee F27.50, ASTM BOS Volume 15.07.

ASTM F2115 - Standard Specification for Motorized Treadmills has been revised to F2115-18 developed by Committee F08.30, ASTM BOS Volume 15.07.

ASTM F2249 - Standard Specification for In-Service Test Methods for Temporary Grounding Jumper Assemblies Used on De-Energized Electric Power Lines and Equipment has been revised to F2249-18 developed by Committee F18.45, ASTM BOS Volume 10.03.

ASTM F2546 - Standard Test Method for Snowboard Step-in Bindings has been reapproved, available as F2546-07(2018) developed by Committee F27.30, ASTM BOS Volume 15.07.

ASTM F2925 - Standard Specification for Tenderness Marketing Claims Associated with Meat Cuts Derived from Beef has been reapproved, available as F2925-11(2018) developed by Committee F10.60, ASTM BOS Volume 15.12.

ASTM F3023 - Standard Test Methods for Evaluating Design and Performance Characteristics of Stationary Upright and Recumbent Exercise Bicycles and Upper and Total Body Ergometers has been revised (with title change) to F3023-18 developed by Committee F08.30, ASTM BOS Volume 15.07.

ASTM F3327 - Standard Practice for Recording the A-UGV Test Configuration is a new standard, now available. F3327-18 developed by Committee F45.91, ASTM BOS Volume 15.08.

ASTM F780 - Standard Test Method for Linear Deformation and Breaking Strength of Alpine Skis has been reapproved, available as F780-93a(2018) developed by Committee F27.30, ASTM BOS Volume 15.07.

Tra cứu tất cả các loại tiêu chuẩn.