Tra cứu tất cả các loại tiêu chuẩn.

ASTM A1011/A1011M - Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength has been revised to A1011/A1011M-18 developed by Committee A01.19, ASTM BOS Volume 01.03.

ASTM A249/A249M - Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes has been revised to A249/A249M-18 developed by Committee A01.10, ASTM BOS Volume 01.01.

ASTM A723/A723M - Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application has been revised to A723/A723M-18 developed by Committee A01.06, ASTM BOS Volume 01.05.

ASTM B108/B108M - Standard Specification for Aluminum-Alloy Permanent Mold Castings has been editorially changed, available as B108/B108M-18e1 developed by Committee B07.01, ASTM BOS Volume 02.02.

ASTM B26/B26M - Standard Specification for Aluminum-Alloy Sand Castings has been editorially changed, available as B26/B26M-18e1 developed by Committee B07.01, ASTM BOS Volume 02.02.

ASTM B618/B618M - Standard Specification for Aluminum-Alloy Investment Castings has been editorially changed, available as B618/B618M-18e1 developed by Committee B07.01, ASTM BOS Volume 02.02.

ASTM B85/B85M - Standard Specification for Aluminum-Alloy Die Castings has been editorially changed, available as B85/B85M-18e1 developed by Committee B07.01, ASTM BOS Volume 02.02.

ASTM B969/B969M - Standard Specification for Aluminum-Alloy Castings Produced by Squeeze Casting, and the Semi-Solid Thixocast and Rheocast Casting Processes has been editorially changed, available as B969/B969M-18e1 developed by Committee B07.01, ASTM BOS Volume 02.02.

ASTM C1648 - Standard Guide for Choosing a Method for Determining the Index of Refraction and Dispersion of Glass has been reapproved, available as C1648-12(2018) developed by Committee C14.11, ASTM BOS Volume 15.02.

ASTM C1651 - Standard Test Method for Measurement of Roll Wave Optical Distortion in Heat-Treated Flat Glass has been reapproved, available as C1651-11(2018) developed by Committee C14.11, ASTM BOS Volume 15.02.

ASTM D1066 - Standard Practice for Sampling Steam has been revised to D1066-18 developed by Committee D19.03, ASTM BOS Volume 11.01.

ASTM D2137 - Standard Test Methods for Rubber Property—Brittleness Point of Flexible Polymers and Coated Fabrics has been reapproved, available as D2137-11(2018) developed by Committee D11.37, ASTM BOS Volume 09.02.

ASTM D3106 - Standard Test Method for Permanent Deformation of Elastomeric Yarns has been reapproved, available as D3106-07(2018) developed by Committee D13.58, ASTM BOS Volume 07.01.

ASTM D3218 - Standard Specification for Polyolefin Monofilaments has been reapproved, available as D3218-07(2018) developed by Committee D13.58, ASTM BOS Volume 07.01.

ASTM D3333 - Standard Practice for Sampling Manufactured Staple Fibers, Sliver, or Tow for Testing has been reapproved, available as D3333-07(2018) developed by Committee D13.58, ASTM BOS Volume 07.01.

ASTM D3513 - Standard Test Method for Overlength Fiber Content of Manufactured Staple Fiber has been reapproved, available as D3513-02(2018) developed by Committee D13.58, ASTM BOS Volume 07.01.

ASTM D3823 - Standard Practice for Determining Ticket Numbers for Sewing Threads has been reapproved, available as D3823-07(2018) developed by Committee D13.58, ASTM BOS Volume 07.01.

ASTM D3937 - Standard Test Method for Crimp Frequency of Manufactured Staple Fibers has been reapproved, available as D3937-12(2018) developed by Committee D13.58, ASTM BOS Volume 07.01.

ASTM D4031 - Standard Test Method for Bulk Properties of Textured Yarns has been reapproved, available as D4031-07(2018) developed by Committee D13.58, ASTM BOS Volume 07.01.

ASTM D4120 - Standard Test Method for Fiber Cohesion in Roving, Sliver, and Top in Dynamic Tests has been reapproved, available as D4120-07(2018) developed by Committee D13.58, ASTM BOS Volume 07.01.

ASTM D4466 - Standard Terminology Related to Multicomponent Textile Fibers has been reapproved, available as D4466-02(2018) developed by Committee D13.58, ASTM BOS Volume 07.02.

ASTM D4762 - Standard Guide for Testing Polymer Matrix Composite Materials has been revised to D4762-18 developed by Committee D30.01, ASTM BOS Volume 15.03.

ASTM D4849 - Standard Terminology Related to Yarns and Fibers has been reapproved, available as D4849-13(2018) developed by Committee D13.58, ASTM BOS Volume 07.02.

ASTM D4972 - Standard Test Methods for pH of Soils has been revised to D4972-18 developed by Committee D18.22, ASTM BOS Volume 04.08.

ASTM D5362 - Standard Test Method for Snagging Resistance of Fabrics (Bean Bag) has been reapproved, available as D5362-13(2018) developed by Committee D13.59, ASTM BOS Volume 07.02.

ASTM D5538 - Standard Practice for Thermoplastic Elastomers—Terminology and Abbreviations has been reapproved, available as D5538-13(2018) developed by Committee D11.08, ASTM BOS Volume 09.01.

ASTM D5646 - Standard Terminology Relating to Seams and Stitches Used in Home Sewing has been reapproved, available as D5646-13(2018) developed by Committee D13.54, ASTM BOS Volume 07.02.

ASTM D5647 - Standard Guide for Measuring Hairiness of Yarns by the Photo-Electric Apparatus has been reapproved, available as D5647-07(2018) developed by Committee D13.58, ASTM BOS Volume 07.02.

ASTM D5924 - Standard Guide for Selection of Simulation Approaches in Geostatistical Site Investigations has been revised to D5924-18 developed by Committee D18.01, ASTM BOS Volume 04.09.

ASTM D6466 - Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser has been reapproved, available as D6466-10(2018) developed by Committee D13.13, ASTM BOS Volume 07.02.

ASTM D6587 - Standard Test Method for Yarn Number Using Automatic Tester has been reapproved, available as D6587-12(2018) developed by Committee D13.58, ASTM BOS Volume 07.02.

ASTM D6602 - Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both has been reapproved, available as D6602-13(2018) developed by Committee D24.66, ASTM BOS Volume 09.01.

ASTM D6717 - Standard Test Method for Linear Density of Elastomeric Yarns (Skein Specimens) has been reapproved, available as D6717-07(2018) developed by Committee D13.58, ASTM BOS Volume 07.02.

ASTM D6720 - Standard Test Method for Evaluation of Recoverable Stretch of Stretch Yarns (Skein Method)has been reapproved, available as D6720-07(2018) developed by Committee D13.58, ASTM BOS Volume 07.02.

ASTM D6798 - Standard Terminology Relating to Flax and Linen has been reapproved, available as D6798-02(2018) developed by Committee D13.17, ASTM BOS Volume 07.02.

ASTM D7121 - Standard Test Method for Rubber Property—Resilience Using Schob Type Rebound Pendulum has been reapproved, available as D7121-05(2018) developed by Committee D11.10, ASTM BOS Volume 09.01.

ASTM D7155 - Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils has been revised to D7155-18 developed by Committee D02.C0.01, ASTM BOS Volume 05.04.

ASTM D7321 - Standard Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration has been revised to D7321-18 developed by Committee D02.14, ASTM BOS Volume 05.04.

ASTM D7501 - Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT) has been revised to D7501-18 developed by Committee D02.14, ASTM BOS Volume 05.04.

ASTM D7573 - Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection has been revised to D7573-18 developed by Committee D19.06, ASTM BOS Volume 11.02.

ASTM D7633 - Standard Test Method for Carbon Black—Carbon Content has been reapproved, available as D7633-13(2018) developed by Committee D24.66, ASTM BOS Volume 09.01.

ASTM D7915 - Standard Practice for Application of Generalized Extreme Studentized Deviate (GESD) Technique to Simultaneously Identify Multiple Outliers in a Data Set has been revised to D7915-18 developed by Committee D02.94, ASTM BOS Volume 05.05.

ASTM D8164 - Standard Guide for Digital Contact Thermometers for Petroleum Products, Liquid Fuels, and Lubricant Testing has been revised to D8164-18a developed by Committee D02.91, ASTM BOS Volume 05.05.

ASTM D8211 - Standard Test Method for Hot Surface Ignition Temperature of Gases on Flat Surface is a new standard, now available. D8211-18 developed by Committee D02.L0, ASTM BOS Volume 05.05.

ASTM D909 - Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline has been revised to D909-18 developed by Committee D02.01, ASTM BOS Volume 05.05.

ASTM E1355 - Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models has been reapproved, available as E1355-12(2018) developed by Committee E05.33, ASTM BOS Volume 04.07.

ASTM E1640 - Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis has been revised to E1640-18 developed by Committee E37.10, ASTM BOS Volume 14.05.

ASTM E2306 - Standard Guide for Disposal of Personal Property Assets has been revised (with title change) to E2306-18 developed by Committee E53.04, ASTM BOS Volume 04.12.

ASTM E2495 - Standard Practice for Prioritizing Asset Resources in Acquisition, Utilization, and Dispositionhas been revised to E2495-18 developed by Committee E53.01, ASTM BOS Volume 04.12.

ASTM E2499 - Standard Practice for Classification of Asset Location Information has been revised (with title change) to E2499-18 developed by Committee E53.01, ASTM BOS Volume 04.12.

ASTM E253 - Standard Terminology Relating to Sensory Evaluation of Materials and Products has been revised to E253-18 developed by Committee E18.01, ASTM BOS Volume 15.08.

ASTM E2606 - Standard Practice for Receipt Notification as a Result of Tangible Asset Movement has been revised to E2606-18 developed by Committee E53.01, ASTM BOS Volume 04.12.

ASTM E2768 - Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test) has been reapproved, available as E2768-11(2018) developed by Committee E05.22, ASTM BOS Volume 04.07.

ASTM E84 - Standard Test Method for Surface Burning Characteristics of Building Materials has been revised to E84-18a developed by Committee E05.22, ASTM BOS Volume 04.07.

ASTM F2164 - Standard Practice for Field Leak Testing of Polyethylene (PE) and Crosslinked Polyethylene (PEX) Pressure Piping Systems Using Hydrostatic Pressure has been revised to F2164-18 developed by Committee F17.40, ASTM BOS Volume 08.04.

ASTM F2550 - Standard Practice for Locating Leaks in Sewer Pipes By Measuring the Variation of Electric Current Flow Through the Pipe Wall has been reapproved, available as F2550-13(2018) developed by Committee F36.20, ASTM BOS Volume 04.12.

ASTM F3110 - Standard Practice for Proper Use of Mechanical Trenchless Point Repair Sleeve with Locking Gear Mechanism for Pipes of Varying Inner Diameter and Offset Joints has been reapproved, available as F3110-14(2018) developed by Committee F36.20, ASTM BOS Volume 04.12.

ASTM F3253 - Standard Specification for Crosslinked Polyethylene (PEX) Tubing with Oxygen Barrier for Hot- and Cold-Water Hydronic Distribution Systemshas been revised to F3253-18 developed by Committee F17.61, ASTM BOS Volume 08.04.

ASTM F402 - Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings has been revised to F402-18 developed by Committee F17.20, ASTM BOS Volume 08.04.

Tra cứu tất cả các loại tiêu chuẩn.