Tra cứu tất cả các loại tiêu chuẩn.

ASTM A105/A105M - Standard Specification for Carbon Steel Forgings for Piping Applications has been revised to A105/A105M-18 developed by Committee A01.22, ASTM BOS Volume 01.01.

ASTM A213/A213M - Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes has been revised to A213/A213M-18a developed by Committee A01.10, ASTM BOS Volume 01.01.

ASTM A229/A229M - Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs has been revised to A229/A229M-18 developed by Committee A01.03, ASTM BOS Volume 01.03.

ASTM A335/A335M - Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Servicehas been revised to A335/A335M-18a developed by Committee A01.10, ASTM BOS Volume 01.01.

ASTM A389/A389M - Standard Specification for Steel Castings, Alloy, Specially Heat Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service has been reapproved, available as A389/A389M-13(2018) developed by Committee A01.18, ASTM BOS Volume 01.02.

ASTM A403/A403M - Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings has been revised to A403/A403M-18a developed by Committee A01.22, ASTM BOS Volume 01.01.

ASTM A494/A494M - Standard Specification for Castings, Nickel and Nickel Alloy has been revised to A494/A494M-18 developed by Committee A01.18, ASTM BOS Volume 01.02.

ASTM A636 - Standard Specification for Nickel Oxide Sinterhas been reapproved, available as A636-08(2018) developed by Committee A01.18, ASTM BOS Volume 01.02.

ASTM A688/A688M - Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes has been revised to A688/A688M-18 developed by Committee A01.10, ASTM BOS Volume 01.01.

ASTM A788/A788M - Standard Specification for Steel Forgings, General Requirements has been revised to A788/A788M-18a developed by Committee A01.06, ASTM BOS Volume 01.05.

ASTM A915/A915M - Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades has been reapproved, available as A915/A915M-08(2018) developed by Committee A01.18, ASTM BOS Volume 01.02.

ASTM C1091 - Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines has been reapproved, available as C1091-03a(2018) developed by Committee C04.20, ASTM BOS Volume 04.05.

ASTM C1359 - Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross Section Test Specimens at Elevated Temperatures has been revised to C1359-18 developed by Committee C28.07, ASTM BOS Volume 15.01.

ASTM C1581/C1581M - Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage has been revised to C1581/C1581M-18a developed by Committee C09.68, ASTM BOS Volume 04.02.

ASTM C1780 - Standard Practice for Installation Methods for Adhered Manufactured Stone Masonry Veneer has been revised to C1780-18a developed by Committee C15.05, ASTM BOS Volume 04.05.

ASTM C301 - Standard Test Methods for Vitrified Clay Pipehas been revised to C301-18 developed by Committee C04.20, ASTM BOS Volume 04.05.

ASTM C4 - Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile has been reapproved, available as C4-04(2018) developed by Committee C04.20, ASTM BOS Volume 04.05.

ASTM C425 - Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings has been reapproved, available as C425-04(2018) developed by Committee C04.20, ASTM BOS Volume 04.05.

ASTM C700 - Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated has been revised to C700-18 developed by Committee C04.20, ASTM BOS Volume 04.05.

ASTM C901 - Standard Specification for Prefabricated Masonry Panels has been revised to C901-18 developed by Committee C15.05, ASTM BOS Volume 04.05.

ASTM D1385 - Standard Test Method for Hydrazine in Waterhas been reapproved (with editorial change), available as D1385-07(2018)e1 developed by Committee D19.03, ASTM BOS Volume 11.01.

ASTM D1599 - Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings has been revised to D1599-18 developed by Committee F17.40, ASTM BOS Volume 08.04.

ASTM D1640/D1640M - Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings has been reapproved, available as D1640/D1640M-14(2018) developed by Committee D01.23, ASTM BOS Volume 06.01.

ASTM D2354 - Standard Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicleshas been reapproved, available as D2354-10(2018) developed by Committee D01.33, ASTM BOS Volume 06.03.

ASTM D3361/D3361M - Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings has been reapproved, available as D3361/D3361M-13(2018) developed by Committee D01.27, ASTM BOS Volume 06.01.

ASTM D3744/D3744M - Standard Test Method for Aggregate Durability Index has been revised to D3744/D3744M-18 developed by Committee D04.51, ASTM BOS Volume 04.03.

ASTM D4145 - Standard Test Method for Coating Flexibility of Prepainted Sheet has been reapproved, available as D4145-10(2018) developed by Committee D01.53, ASTM BOS Volume 06.02.

ASTM D4146 - Standard Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel has been reapproved, available as D4146-10(2018) developed by Committee D01.53, ASTM BOS Volume 06.02.

ASTM D4726 - Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors has been revised to D4726-18 developed by Committee D20.24, ASTM BOS Volume 08.03.

ASTM D5031/D5031M - Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings has been reapproved, available as D5031/D5031M-13(2018) developed by Committee D01.27, ASTM BOS Volume 06.01.

ASTM D5191 - Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) has been revised to D5191-18 developed by Committee D02.08, ASTM BOS Volume 05.02.

ASTM D5478 - Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer has been reapproved, available as D5478-13(2018) developed by Committee D01.24, ASTM BOS Volume 06.01.

ASTM D5814 - Standard Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test has been revised to D5814-18 developed by Committee D20.95, ASTM BOS Volume 08.03.

ASTM D5928 - Standard Practice for Screening of Waste for Radioactivity has been revised to D5928-18a developed by Committee D34.01.05, ASTM BOS Volume 11.04.

ASTM D6063 - Standard Guide for Sampling of Drums and Similar Containers by Field Personnel has been reapproved, available as D6063-11(2018) developed by Committee D34.01.02, ASTM BOS Volume 11.04.

ASTM D6079 - Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) has been revised to D6079-18 developed by Committee D02.E0, ASTM BOS Volume 05.02.

ASTM D6378 - Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method) has been revised to D6378-18 developed by Committee D02.08, ASTM BOS Volume 05.03.

ASTM D6440 - Standard Terminology Relating to Hydrocarbon Resins has been reapproved, available as D6440-10(2018) developed by Committee D01.16, ASTM BOS Volume 06.01.

ASTM D6670 - Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products has been revised to D6670-18 developed by Committee D22.05, ASTM BOS Volume 11.07.

ASTM D6957 - Standard Practice for Measuring Curl in Paint Brush Filling Material has been reapproved, available as D6957-12(2018) developed by Committee D01.61, ASTM BOS Volume 06.02.

ASTM D7377 - Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints using a Water Faucet has been reapproved, available as D7377-09(2018) developed by Committee D01.44, ASTM BOS Volume 06.02.

ASTM D7639 - Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence has been reapproved, available as D7639-10(2018) developed by Committee D01.53, ASTM BOS Volume 06.02.

ASTM D7688 - Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by Visual Observation has been revised to D7688-18 developed by Committee D02.E0, ASTM BOS Volume 05.04.

ASTM D7858 - Standard Test Method for Determination of Bisphenol A in Soil, Sludge, and Biosolids by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry has been reapproved, available as D7858-13(2018) developed by Committee D34.01.06, ASTM BOS Volume 11.04.

ASTM D7989 - Standard Practice for Demonstrating Equivalent In-Plane Lateral Seismic Performance to Wood-Frame Shear Walls Sheathed with Wood Structural Panels has been revised to D7989-18 developed by Committee D07.05, ASTM BOS Volume 04.10.

ASTM D822/D822M - Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings has been reapproved, available as D822/D822M-13(2018) developed by Committee D01.27, ASTM BOS Volume 06.01.

ASTM D850 - Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials has been editorially changed, available as D850-18e1 developed by Committee D16.04, ASTM BOS Volume 06.04.

ASTM E1946 - Standard Practice for Measuring Cost Risk of Buildings and Building Systems and Other Constructed Projects has been revised to E1946-18 developed by Committee E06.81, ASTM BOS Volume 04.11.

ASTM E2248 - Standard Test Method for Impact Testing of Miniaturized Charpy V-notch Specimens has been revised to E2248-18 developed by Committee E28.07, ASTM BOS Volume 03.01.

ASTM E2273 - Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies has been revised to E2273-18 developed by Committee E06.58, ASTM BOS Volume 04.12.

ASTM E308 - Standard Practice for Computing the Colors of Objects by Using the CIE System has been revised to E308-18 developed by Committee E12.04, ASTM BOS Volume 06.01.

ASTM F2010/F2010M - Standard Test Method for Evaluation of Glove Effects on Wearer Finger Dexterity Using a Modified Pegboard Test has been revised (with title change) to F2010/F2010M-18 developed by Committee F23.60, ASTM BOS Volume 11.03.

ASTM F2580 - Standard Practice for Evaluation of Modular Connection of Proximally Fixed Femoral Hip Prosthesishas been revised to F2580-18 developed by Committee F04.22, ASTM BOS Volume 13.02.

ASTM F2933 - Standard Consumer Safety Specification for Crib Mattresses has been revised to F2933-18 developed by Committee F15.66, ASTM BOS Volume 15.11.

ASTM A703/A703M - Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts has been revised to A703/A703M-18a developed by Committee A01.18, ASTM BOS Volume 01.02.

ASTM A781/A781M - Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use has been revised to A781/A781M-18c developed by Committee A01.18, ASTM BOS Volume 01.02.

ASTM A957/A957M - Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use has been revised to A957/A957M-18a developed by Committee A01.18, ASTM BOS Volume 01.02.

ASTM A985/A985M - Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts has been revised to A985/A985M-18a developed by Committee A01.18, ASTM BOS Volume 01.02.

ASTM C856 - Standard Practice for Petrographic Examination of Hardened Concrete has been revised to C856-18a developed by Committee C09.65, ASTM BOS Volume 04.02.

ASTM C936/C936M - Standard Specification for Solid Concrete Interlocking Paving Units has been revised to C936/C936M-18 developed by Committee C15.03, ASTM BOS Volume 04.05.

ASTM D4787 - Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrateshas been reapproved, available as D4787-13(2018) developed by Committee D01.46, ASTM BOS Volume 06.02.

ASTM D6145 - Standard Guide for Monitoring Sediment in Watersheds has been reapproved, available as D6145-97(2018) developed by Committee D19.02, ASTM BOS Volume 11.01.

ASTM D6146 - Standard Guide for Monitoring Aqueous Nutrients in Watersheds has been reapproved, available as D6146-97(2018) developed by Committee D19.02, ASTM BOS Volume 11.01.

ASTM D6568 - Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples has been reapproved, available as D6568-00(2018) developed by Committee D19.02, ASTM BOS Volume 11.01.

ASTM D7538 - Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device has been reapproved, available as D7538-09(2018) developed by Committee D01.44, ASTM BOS Volume 06.02.

ASTM D7826 - Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives has been revised to D7826-18a developed by Committee D02.J0.02, ASTM BOS Volume 05.05.

ASTM E1190 - Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Membershas been reapproved, available as E1190-11(2018) developed by Committee E06.13, ASTM BOS Volume 04.11.

ASTM E1337 - Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire has been reapproved, available as E1337-90(2018) developed by Committee E17.21, ASTM BOS Volume 04.03.

ASTM E1578 - Standard Guide for Laboratory Informatics has been revised to E1578-18 developed by Committee E13.15, ASTM BOS Volume 03.06.

ASTM E1957 - Standard Practice for Installing and Using Pneumatic Tubes With Roadway Traffic Counters and Classifiers has been reapproved, available as E1957-04(2018) developed by Committee E17.52, ASTM BOS Volume 04.03.

ASTM E2098/E2098M - Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution has been reapproved, available as E2098/E2098M-13(2018) developed by Committee E06.58, ASTM BOS Volume 04.11.

ASTM E2134/E2134M - Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS) has been reapproved, available as E2134/E2134M-14(2018) developed by Committee E06.58, ASTM BOS Volume 04.11.

ASTM E2213 - Standard Specification for Telecommunications and Information Exchange Between Roadside and Vehicle Systems — 5-GHz Band Dedicated Short-Range Communications (DSRC), Medium Access Control (MAC), and Physical Layer (PHY) Specifications has been reapproved, available as E2213-03(2018) developed by Committee E17.51, ASTM BOS Volume 04.03.

ASTM E2259 - Standard Guide for Archiving and Retrieving Intelligent Transportation Systems-Generated Data has been reapproved, available as E2259-03a(2018) developed by Committee E17.52, ASTM BOS Volume 04.03.

ASTM E2359/E2359M - Standard Test Method for Field Pull Testing of an In-Place Exterior Insulation and Finish System Clad Wall Assembly has been reapproved, available as E2359/E2359M-13(2018) developed by Committee E06.58, ASTM BOS Volume 04.12.

ASTM E2415 - Standard Practice for Installing Piezoelectric Highway Traffic Sensors has been reapproved, available as E2415-05(2018) developed by Committee E17.52, ASTM BOS Volume 04.03.

ASTM E2430/E2430M - Standard Specification for Expanded Polystyrene (“EPS”) Thermal Insulation Boards for Use in Exterior Insulation and Finish Systems (“EIFS”) has been reapproved, available as E2430/E2430M-13(2018) developed by Committee E06.58, ASTM BOS Volume 04.12.

ASTM E2485/E2485M - Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings has been reapproved, available as E2485/E2485M-13(2018) developed by Committee E06.58, ASTM BOS Volume 04.12.

ASTM E2486/E2486M - Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS) has been reapproved, available as E2486/E2486M-13(2018) developed by Committee E06.58, ASTM BOS Volume 04.12.

ASTM E2692 - Standard Test Method for Structural Performance of Thermal Barriers in Fenestration Products has been reapproved, available as E2692-10(2018) developed by Committee E06.51, ASTM BOS Volume 04.12.

ASTM E2717 - Standard Practice for Estimating the Environmental Load of Residential Wastewater has been revised to E2717-18 developed by Committee E60.07, ASTM BOS Volume 04.12.

ASTM E405 - Standard Test Methods for Wear Testing Rotary Operators for Windows has been reapproved, available as E405-04(2018) developed by Committee E06.51, ASTM BOS Volume 04.11.

Tra cứu tất cả các loại tiêu chuẩn.