Tra cứu tất cả các loại tiêu chuẩn.

ASTM D1160 - Standard Test Method for Distillation of Petroleum Products at Reduced Pressure has been revised to D1160-18 developed by Committee D0.08, ASTM BOS Volume 05.01.

ASTM D123 - Standard Terminology Relating to Textiles has been editorially changed, available as D123-17e1 developed by Committee D13.92, ASTM BOS Volume 07.01.

ASTM D2564 - Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systemshas been reapproved, available as D2564-12(2018) developed by Committee F17.20, ASTM BOS Volume 08.04.

ASTM D4510 - Standard Test Method for Counting Partial Cleavages in Wool and Other Animal Fibers has been reinstated as D4510-18 developed by Committee D13.13, ASTM BOS Volume 07.02.

ASTM D4553 - Standard Test Method for Determining In Situ Creep Characteristics of Rock has been reinstated as D4553-18 developed by Committee D18.12, ASTM BOS Volume 04.08.

ASTM D4631 - Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique has been reinstated as D4631-18 developed by Committee D18.21, ASTM BOS Volume 04.08.

ASTM D5477 - Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR) has been revised to D5477-18 developed by Committee D20.70, ASTM BOS Volume 08.03.

ASTM D5989 - Standard Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA) has been revised to D5989-18 developed by Committee D20.15, ASTM BOS Volume 08.03.

ASTM D7016/D7016M - Standard Test Method to Evaluate Edge Binding Components Used in Mattresses After Exposure to An Open Flame has been revised to D7016/D7016M-18 developed by Committee D13.52, ASTM BOS Volume 07.02.

ASTM D7292 - Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI) has been revised to D7292-18 developed by Committee D20.15, ASTM BOS Volume 08.03.

ASTM D7453 - Standard Practice for Sampling of Petroleum Products for Analysis by Process Stream Analyzers and for Process Stream Analyzer System Validationhas been revised to D7453-18 developed by Committee D02.25, ASTM BOS Volume 05.04.

ASTM D7571 - Standard Specification for Retained Sewn Seam Strength After Exposures to Hot Air and Open Flame has been revised to D7571-18 developed by Committee D13.52, ASTM BOS Volume 07.02.

ASTM D7608 - Standard Test Method for Torsional Ring Shear Test to Measure Drained Fully Softened Shear Strength and Stress Dependent Strength Envelope of Fine-Grained Soils has been revised (with title change) to D7608-18 developed by Committee D18.05, ASTM BOS Volume 04.09.

ASTM D7808 - Standard Practice for Determining the Site Precision of a Process Stream Analyzer on Process Stream Material has been revised to D7808-18 developed by Committee D02.25, ASTM BOS Volume 05.05.

ASTM E2215 - Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels has been revised to E2215-18 developed by Committee E10.02, ASTM BOS Volume 12.02.

ASTM E2395 - Standard Specification for Voluntary Security Performance of Window and Door Assemblies with Glazing Impact has been revised (with title change) to E2395-18 developed by Committee E06.51, ASTM BOS Volume 04.12.

ASTM F17 - Standard Terminology Relating to Primary Barrier Packaging has been revised to F17-18 developed by Committee F02.50, ASTM BOS Volume 15.10.

ASTM F2063 - Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants has been revised to F2063-18 developed by Committee F04.12, ASTM BOS Volume 13.01.

ASTM F2261 - Standard Test Method for Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 and 80 Socket-Type. has been reapproved, available as F2261-06(2018) developed by Committee F17.40, ASTM BOS Volume 08.04.

ASTM F2657 - Standard Test Method for Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubinghas been reapproved, available as F2657-07(2018) developed by Committee F17.40, ASTM BOS Volume 08.04.

ASTM F3010 - Standard Practice for Two-Component Resin Based Membrane-Forming Moisture Mitigation Systems for Use Under Resilient Floor Coverings has been revised to F3010-18 developed by Committee F06.40, ASTM BOS Volume 15.04.

ASTM F3320 - Standard Guide for Coating Characterization of Drug Coated Balloons is a new standard, now available. F3320-18 developed by Committee F04.30, ASTM BOS Volume 13.02.

ASTM F725 - Standard Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards has been reapproved, available as F725-03(2018) developed by Committee F17.40, ASTM BOS Volume 08.04.

ASTM F838 - Standard Test Method for Determining Bacterial Retention of Membrane Filters Utilized for Liquid Filtration has been editorially changed, available as F838-15ae1 developed by Committee E55.03, ASTM BOS Volume 14.05. 

Tra cứu tất cả các loại tiêu chuẩn.