Ấn phẩm này do Ban kỹ thuật tiêu chuẩn D11 của ASTM về Cao su và Vật liệu từ Cao su tài trợ, đánh giá 9 lĩnh vực sản phẩm cao su khác nhau. Quy trình sản xuất được rà soát cho từng nhóm sản phẩm cao su. Nhấn mạnh vào việc thảo luận các khía cạnh quan trọng trong việc sản xuất từng loại sản phẩm cao su này. Ngoài ra, mỗi chương còn có phần tổng quan về các tiêu chuẩn thử nghiệm sản phẩm và các quy định kỹ thuật hiện có. Cuối cùng, mỗi chương có thể bao gồm quan điểm và định hướng tương lai của các ngành này đang được xem xét.

Ngành cao su bao gồm nhiều sản phẩm khác nhau từ lốp và dây curoa ô tô đến ống mềm và vòng đệm cho đến vật liệu y tế và sản phẩm tiêu dùng. Hiện tại, có hơn một trăm tiêu chuẩn kỹ thuật sản phẩm và các tiêu chuẩn về phương pháp thử của ASTM được sử dụng thường xuyên hàng ngày để xác định chất lượng của một sản phẩm cao su nhất định.

Cuốn sách này được xây dựng nhằm mục đích hướng dẫn thực hành trong việc xem xét các phương pháp và quy định kỹ thuật thích hợp để sử dụng trong thương mại.

Người đọc cần có được sự hiểu biết hợp lý về điều gì là quan trọng và cốt yếu đối với từng nhóm sản phẩm cao su cần được xem xét.

Mục lục của Cuốn sách

Chương 1 | Giới thiệu

John S. Dick

Chương 2 | Lốp xe

Nina Veas

Chương 3 | Vòi nước

Luis Moreiras

Chương 4 | Cao su và các sản phẩm tương tự cao su dành cho ứng dụng lợp mái có độ dốc thấp

Ana H. Delgado, Randy Ober, Ralph M. Paroli

Chương 5 | Cách ly đàn hồi để bảo vệ địa chấn cho các tòa nhà và cầu

James M. Kelly

Chương 6 | Tổng quan về các thử nghiệm, quy định kỹ thuật, thực hành và hướng dẫn cho các sản phẩm cao su y tế và tiêu dùng

Katrina Cornish

Chương 7 | Băng tải

Doug Gilg, Jeff Steigelman, Robin Steven

Liên hệ mua với Techdoc.vn

Tra cứu toàn bộ danh mục Tiêu chuẩn ASTM

Danh mục các tiêu chuẩn ASTM về cao su và sản phẩm cao su

Natural Rubber

• ASTM D1076-23 Standard Specification for Rubber—Concentrated, Ammonia Stabilized, Creamed, and Centrifuged Natural Latex
• ASTM D1278-91a(2020) Standard Test Methods for Rubber from Natural Sources—Chemical Analysis
• ASTM D1485-07(2020) Standard Practice for Rubber from Natural Sources—Sampling and Sample Preparation
• ASTM D2227-96(2020) Standard Specification for Natural Rubber (NR) Technical Grades
• ASTM D2449-88(2020) Standard Specification for Rubber Bales From Natural Sources—Limit on Coating
• ASTM D3157-05(2020) Standard Test Method for Rubber from Natural Sources—Color
• ASTM D3184-11(2022) Standard Practice for Rubber—Evaluation of NR (Natural Rubber)
• ASTM D3194-17(2022) Standard Test Method for Rubber From Natural Sources—Plasticity Retention Index (PRI)
• ASTM D7050-04(2019) Standard Practice for Rubber from Natural Sources—Sampling and Sorting Bales Based on Predicted Processing Properties

Synthetic Rubbers

• ASTM D1417-16(2021) Standard Test Methods for Rubber Latices—Synthetic
• ASTM D3185-06(2021) Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil
• ASTM D3186-07(2021) Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil
• ASTM D3187-06(2021) Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Rubber)
• ASTM D3188-06(2021) Standard Test Methods for Rubber—Evaluation of IIR (Isobutene-Isoprene Rubber)
• ASTM D3189-06(2021) Standard Test Methods for Rubber—Evaluation of Solution BR (Polybutadiene Rubber)
• ASTM D3190-06(2021) Standard Test Method for Rubber—Evaluation of Chloroprene Rubber (CR)
• ASTM D3403-07(2021) Standard Test Methods for Rubber—Evaluation of IR (Isoprene Rubber)
• ASTM D3484-06(2022) Standard Test Methods for Rubber—Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber)
• ASTM ASTM D3568-03(2022) Standard Test Methods for Rubber—Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil
• ASTM D3848-03(2022) Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Copolymers) Mixed With Carbon Black
• ASTM D3896-07(2021) Standard Practice for Rubber From Synthetic Sources—Sampling
• ASTM D3958-23 Standard Test Methods for Rubber—Evaluation of BIIR and CIIR (Halogenated Isobutene—Isoprene Rubber)
• ASTM D5605-94(2021) Standard Practice for Styrene-Butadiene Rubber (SBR)—Establishing Raw Mooney Viscosity Target Values

Rubber Adhesive Systems

• ASTM D413-98(2017) Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate
• ASTM D429-14(2023) Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates
• ASTM D816-06(2023) Standard Test Methods for Rubber Cements

Rubber Sustainability

• ASTM D5603-23 Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Rubber
• ASTM D5644-23 Standard Test Method for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
• ASTM D6814-02(2023) Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density
• ASTM D8268-19(2023) Standard Practice for Rubber Compounding Materials—Evaluation of Recycled Vulcanizate Particulate Rubber

Classification of Rubber Compounds

• ASTM D2000-18 Standard Classification System for Rubber Products in Automotive Applications
• ASTM D7999-15(2019) Standard Classification for Rubber Products in Natural Gas Pipeline Applications

Rubber Hose and Belting

• ASTM D378-10(2016) Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type
• ASTM D380-94(2020) Standard Test Methods for Rubber Hose
• ASTM D622-99(2020) Standard Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System
• ASTM D3902-90(2020) Standard Test Method for Rubber Hose for Gas Diffusion of Liquefied Petroleum Gas

Coated Fabrics, Rubber Threads and Seals

• ASTM D751-19 Standard Test Methods for Coated Fabrics
• ASTM D1330-04(2022) Standard Specification for Rubber Sheet Gaskets
• ASTM D1414-22 Standard Test Methods for Rubber O-Rings
• ASTM D1869-15(2022) Standard Specification for Rubber Rings for Fiber-Reinforced Cement Pipe
• ASTM D2136-19e1 Standard Test Method for Coated Fabrics—Low-Temperature Bend Test
• ASTM D2137-11(2018) Standard Test Methods for Rubber Property—Brittleness Point of Flexible Polymers and Coated Fabrics
• ASTM D2527-83(2022) Standard Specification for Rubber Seals—Splice Strength
• ASTM D3393-91(2022) Standard Specification for Coated Fabrics—Waterproofness
• ASTM D3667-16(2022) Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors
• ASTM D3738-16(2022) Standard Specification for Rubber-Coated Cloth Hospital Sheeting
• ASTM D3771-15(2022) Standard Specification for Rubber Seals Used in Concentrating Solar Collectors
• ASTM D3832-79(2022) Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems
• ASTM D3903-15(2022) Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems
• ASTM D4005-92(2022) Standard Test Method for Plastic-Coated Fabrics—Completeness of Fusion of PVC Dispersion Coatings
• ASTM D5193/D5193M-93(2022) Standard Test Method for Coated Fabrics—Air Retention
• ASTM D6515-00(2023)e1 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
• ASTM D6909-10(2023) Standard Specification for High Temperature and Acid-Resistant Fluorocarbon Terpolymer Elastomer

Consumer Rubber Products

• ASTM D3492-16 Standard Specification for Rubber Contraceptives (Male Condoms)
• ASTM D3577-19(2023) Standard Specification for Rubber Surgical Gloves
• ASTM D3578-19(2023) Standard Specification for Rubber Examination Gloves
• ASTM D3579-77(2023) Standard Specification for Rubber Surgical Drainage Tubes, Penrose-Type
• ASTM D3772-15(2021) Standard Specification for Industrial Rubber Finger Cots
• ASTM D4316-95(2016) Standard Specification for Elastomeric Water Bottles
• ASTM D4679-21 Standard Specification for Rubber General Purpose, Household or Beautician Gloves
• ASTM D5151-19(2023) Standard Test Method for Detection of Holes in Medical Gloves
• ASTM D5250-19(2023) Standard Specification for Poly(vinyl chloride) Gloves for Medical Application
• ASTM D5712-15(2020) Standard Test Method for Analysis of Aqueous Extractable Protein in Latex, Natural Rubber, and Elastomeric Products Using the Modified Lowry Method
• ASTM D6124-06(2022) Standard Test Method for Residual Powder on Medical Gloves
• ASTM D6284-17(2023) Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine
• ASTM D6319-19(2023) Standard Specification for Nitrile Examination Gloves for Medical Application
• ASTM D6324-11(2023) Standard Specification for Male Condoms Made from Polyurethane
• ASTM D6355-07(2022) Standard Test Method for Human Repeat Insult Patch Testing of Medical Gloves
• ASTM D6499-18(2023) Standard Test Method for Immunological Measurement of Antigenic Protein in Hevea Natural Rubber (HNR) and its Products
• ASTM D6976-13(2018) Standard Specification for Rubber Contraceptives—Vaginal Diaphragms
• ASTM D6977-19(2023) Standard Specification for Polychloroprene Examination Gloves for Medical Application
• ASTM D6978-05(2023) Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs
• ASTM D7102-17(2022) Standard Guide for Determination of Endotoxin on Sterile Medical Gloves
• ASTM D7103-19(2023) Standard Guide for Assessment of Medical Gloves
• ASTM D7160-16(2023) Standard Practice for Determination of Expiration Dating for Medical Gloves
• ASTM D7161-16(2023) Standard Practice for Determination of Real Time Expiration Dating of Mature Medical Gloves Stored Under Typical Warehouse Conditions
• ASTM D7198-05(2023) Standard Specification for Disposable Embalming Gloves for Single-Use Applications
• ASTM D7246-06(2021) Standard Test Method for Detection of Holes in Polyethylene Food Service Gloves
• ASTM D7329-07(2018) Standard Specification for Food Preparation and Food Handling (Food Service) Gloves
• ASTM D7558-09(2019) Standard Test Method for Colorimetric/Spectrophotometric Procedure to Quantify Extractable Chemical Dialkyldithiocarbamate, Thiuram, and Mercaptobenzothiazole Accelerators in Natural Rubber Latex and Nitrile Gloves
• ASTM D7661-23 Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms
• ASTM D7850-19 Standard Specification for Biological Properties of Industry Reference Materials (IRM)
• ASTM D7866-23 Standard Specification for Radiation Attenuating Protective Gloves
• ASTM D7907-14(2019) Standard Test Methods for Determination of Bactericidal Efficacy on the Surface of Medical Examination Gloves
• ASTM D8238-18(2023) Standard Test Method for Immunological Assay to Quantify Extractable Guayule Natural Rubber (GNR) Proteins
• ASTM D8389-21 Standard Performance Specification for Urinary Intermittent Catheters
• ASTM D8419-21 Standard Specification for Anesthesia Reservoir Bags
• ASTM F623-19 Standard Performance Specification for Foley Catheter