This European Standard applies to pipes and fittings made from polyester resin concrete (PRC), intended to be used within a drain or sewer system operating without pressure. It applies to products for use in buried installations to be installed by open-trench techniques or pipe jacking. The intended use of these products is for the conveyance of sewage, rainwater and surface water at temperatures up to 50 °C, without pressure or occasionally at a head of pressure up to 0,5 bar, and installed in areas subjected to vehicle and/or pedestrian traffic. It specifies definitions, requirements and characteristics of pipes, fittings, joints, materials, test methods and marking.
Số hiệu tiêu chuẩn
DIN EN 14636-1
Tên tiêu chuẩn
Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 1: Pipes and fittings with flexible joints; German version EN 14636-1:2009
Ngày phát hành
2010-04-00
Tiêu chuẩn tương đương
EN 14636-1 (2009-11), IDT
Thay thế cho
DIN EN 14636-1 (2003-05)
Từ khóa
Aggregates * Bending strength * Chemical resistance * Classification * Compressive strength * Consistency (mechanical property) * Constructional products * Cross sections * Definitions * Depressurized * Designations * Dimensions * Elastomers * Fatigue strength * Fitness for purpose * Fittings * Flexible * Materials * Mathematical calculations * Mechanical properties * Overall lengths * Peak value of compression strength * Pipelines * Pipes * Piping system * Plastic pipelines * Plastic pipes * Plastics * Polymers * Properties * Protective tubes * Resins * Ring bend tensile strength * Sewers * Strength class * Testing * Tightness * Tolerances (measurement) * Underground * Underground installations * Plastic tubes * Impermeability * Freedom from holes * Density
.jpg&w=145&h=165){kind=logo}
.png)
.jpg){kind=logo}
.jpg){kind=logo}
-_-logo.png){kind=logo}
