This standard specifies the equations to be used in a simulation method for calculating the non steady transfer of heat and moisture through building structures. It also provides a benchmark example intended to be used for validating a simulation method claiming conformity with this standard, together with the allowed tolerances. The equations in this standard take account of the following storage and one-dimensional transport phenomena: heat storage in dry building materials and absorbed water; heat transport by moisture-dependent thermal conduction; latent heat transfer by vapour diffusion; moisture storage by vapour sorption and capillary forces; moisture transport by vapour diffusion; moisture transport by liquid transport (surface diffusion and capillary flow). The equations described in this standard account for the following climatic variables; internal and external temperature; internal and external humidity; solar and longwave radiation; precipitation (normal and driving rain); wind speed and direction. The hygrothermal equations described in this standard shall not be applied in cases where; convection takes place through holes and cracks; two-dimensional effects play an important part (e. g. rising damp, conditions around thermal bridges, effect of gravitational forces); hydraulic, osmotic, electrophoretic forces are present; daily mean temperatures in the component exceed 50 °C.