ISO 6402-1

Plastics - Impact-resistant acrylonitrile/styrene (ASA, AES, ACS) moulding and extrusion materials, excluding butadiene-modified materials - Part 1: Designation system and basis for specifications

1997-07-00

Hết hiệu lực

DIN 16777-1 (1987-09), IDT * DIN EN ISO 6402-1 (1999-10), IDT * DIN EN ISO 6402-1 (1998-11), IDT * BS EN ISO 6402-1 (1997-09-15), IDT * EN ISO 6402-1 (1999-05), IDT * prEN ISO 6402-1 (1998-09), IDT * NF T53-037-1 (1999-10-01), IDT * JIS K 6876-1 (1999-12-20), IDT * SN EN ISO 6402-1 (1999-10), IDT * OENORM EN ISO 6402-1 (1999-10-01), IDT * OENORM EN ISO 6402-1 (1998-11-01), IDT * SS-EN ISO 6402-1 (1999-05-21), IDT * UNE-EN ISO 6402-1 (2000-03-27), IDT * STN EN ISO 6402-1 (2001-01-01), NEQ * NEN-EN-ISO 6402-1:1999 en (1999-05-01), IDT * NEN-ISO 6402-1:1997 en (1997-07-01), IDT

ISO 1043-1 (1997-03) * ISO 1043-2 (1988-10) * ISO 1656 (1996-02) * ISO 6402-2 (1994-11)

ISO 6402-1 (1990-10)

ISO 6402-1 (2001-02)

ISO 6402-1 (2002-10) * ISO 6402-1 (2001-02) * ISO 6402-1 (1997-07) * ISO 6402-1 (1990-10) * ISO 19065-1 (2014-12) * ISO/DIS 6402-1 (1986-04)

Acrylic resins * Acrylonitrile * Acrylonitrile-styrene * ACS * AES * ASA * Basis * Classification * Classification systems * Copolymers * Definitions * Designation systems * Designations * Dienes * Encoding * Esters * Extruding * Identification methods * Impact resistant * Impact strength * Marking * Materials * Moulding materials * Mouldings (shaped section) * Plastics * Polystyrene * Properties * Specification * Styrene * Thermoplastic polymers * Codification * Atomic Emission Spectrometry

83.080.20. Vật liệu dẻo nhiệt

7