This SAE Standard provides general, dimensional and performance specifications for the most common hoses used in hydraulic systems on mobile and stationary equipment. The general specifications contained in Sections 1 through 12 are applicable to all hydraulic hoses and supplement the detailed specifications for the 100R-series hoses contained in the later sections of this document. This document shall be utilized as a procurement document only to the extent as agreed upon by the manufacturer and user. The rated working pressure of a hose assembly comprising SAE J517 hose and hose fitting end connections per SAE J516, J518, J1453, etc., shall not exceed the lower of the respective SAE working pressure rated values. When using SAE J 517 hose for marine applications, see SAE J 1475, J 1942 and J 1942-1. The SAE J517 100R9, 100R10 and 100R11 hoses will be discontinued beginning with the year 2005, due to lack of demand. The SAEJ 517 100R1A, 100R2A, 100R2B and 100R 2BT will be discontinued beginning with the year 2005 due to lack of demand. For DOD orders after 2004 of National Stock Numbers 4720-00-922-5130 and 4720-01-291-4565 use 100R1AT and for National Stock Numbers 4720-01-328-1046 use 100R2AT. The SAE J517 100R2AT maximum working pressures will be replaced by the type S maximum working pressures beginning with the year 2006, eliminating the need to label 100R2 as type S. The SAE J517 100R16 maximum working pressures will be replaced by the type S maximum working pressures with the year 2008, eliminating the need to label 100R16 as type S.