EN ISO 15875-2/A1

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes - Amendment 1 (ISO 15875-2:2003/Amd 1:2007)

2007-06-00

Có hiệu lực

DIN EN ISO 15875-2/A1 (2007-09), IDT * BS EN ISO 15875-2 (2004-06-14), NEQ * NF T54-943-2/A1 (2007-09-01), IDT * ISO 15875-2 AMD 1 (2007-06), IDT * SN EN ISO 15875-2/A1 (2007-09), IDT * OENORM EN ISO 15875-2 (2008-03-01), IDT * PN-EN ISO 15875-2/A1 (2007-08-28), IDT * PN-EN ISO 15875-2/A1 (2008-11-07), IDT * SS-EN ISO 15875-2/A1 (2007-06-25), IDT * UNE-EN ISO 15875-2/A1 (2007-11-14), IDT * UNI EN ISO 15875-2:2008 (2008-01-24), IDT * CSN EN ISO 15875-2 (2004-12-01), IDT * DS/EN ISO 15875-2/A1 (2007-11-05), IDT * NEN-EN-ISO 15875-2:2004/A1:2007 en (2007-11-01), IDT * SFS-EN ISO 15875-2/A1:en (2007-11-23), IDT

EN ISO 15875-2 (2003-12)

EN ISO 15875-2/prA1 (2007-03)

EN ISO 15875-2/A1 (2007-06) * EN ISO 15875-2/prA1 (2007-03) * EN ISO 15875-2/prA1 (2006-01)

Buildings * Chemical properties * Cold * Cold water * Creep test load * Cross-linked * Cross-linked materials * Dimensions * Drinking water lines * Drinking water supply * House installations * Installations * Marking * Mechanical properties * Operating conditions * PE * PE-X * Physical properties * Pipe couplings * Pipelines * Pipes * Piping system * Plastic pipelines * Plastic pipes * Plastics * Polyethylene * Potable water * Properties * Service installations in buildings * Service water * Specification (approval) * Testing * Tolerances (measurement) * Warm water * Water * Water pipes * Water practice * Water supply * Welded joints * Plastic tubes * Drinking water

23.040.20. Ống bằng chất dẻo
91.140.60. Hệ thống cung cấp nước

4