Applies to optical fibre amplifiers (OFAs) using active fibres, containing rare-earth dopants, currently commercially available. The uniform requirements for accurate and reliable measurements of the signal-spontaneous noise figure as defined in 3.1.18 of IEC 61291-1 are established. The test method independently detects amplified signal power and amplified spontaneous emission (ASE)power by launching optical pulses into the OFA under test and synchronously detecting "on" and "off" levels of the output pulses by using an optical sampling switch and an optical spectrum analyzer (OSA).
Số hiệu tiêu chuẩn
IEC 61290-10-1*CEI 61290-10-1
Tên tiêu chuẩn
Optical amplifiers - Test methods - Part 10-1: Multichannel parameters; Pulse method using an optical switch and optical spectrum analyzer
Ngày phát hành
2003-05-00
Tiêu chuẩn tương đương
NF C93-805-10-1*NF EN 61290-10-1 (2003-11-01), IDT * DIN EN 61290-10-1 (2004-02), IDT * BS EN 61290-10-1 (2003-08-26), IDT * EN 61290-10-1 (2003-07), IDT * JIS C 6122-10-1 (2007-03-20), IDT * OEVE/OENORM EN 61290-10-1 (2004-03-01), IDT * PN-EN 61290-10-1 (2004-08-15), IDT * SS-EN 61290-10-1 (2004-06-28), IDT * STN EN 61290-10-1 (2004-01-01), IDT * CSN EN 61290-10-1 (2003-12-01), IDT * NEN-EN-IEC 61290-10-1:2003 en (2003-08-01), IDT
Từ khóa
Amplifiers * Analyzers * Applications * Basic specification * Electrical engineering * Fibre optics * Mathematical calculations * Measurement * Measuring techniques * Multi-channel recording * Multichannels * Noise figure * Optical fibres * Optical instruments * Optical waveguides * Optics * Parameters * Properties * Rare earth metals * Ratings * Specification * Spectral analysis * Spectroscopic instruments * Switches * Testing * Use * Implementation
IEC 61290-10-1*CEI 61290-10-1
.png)
.jpg){kind=logo}
.jpg){kind=logo}
-_-logo.png){kind=logo}
