In response to the R&TTE-CA query (document ERM 39 40 39 http://docbox.etsi.org/erm/erm/meeting39 40/ERM 39 40 39 LS RTTECA to ERM re EN 300 440-1 detector.zip), EN 300 440-2 will be slightly revised in order to clarify which is the appropriate detector to be used for measuring spurious emissions. The following parameters will also be modified: ·for carrier frequencies above 20 GHz, in measurements of unwanted emissions in the spurious domain and spurious emissions, the upper frequency of the measurements will be consistent with the market actual commonly available measuring receiver ·the upper limit of the calibration of the shielded RF anechoic chamber will be brought in line with the above bullet point's upper frequency measurement. Amendments to bring Part 2 in line with Part 1 will be done as relevant.