Loading data. Please wait

IEC 60510-1-5*CEI 60510-1-5

Methods of measurement for radio equipment used in satellite earth stations. Part 1: Measurements common to sub-systems and combinations of sub-systems. Section Five: Noise temperature measurements

Số trang: 33
Ngày phát hành: 1988-00-00

Liên hệ
Covers measuring methods to be used in order to evaluate the noise temperature and the noise figure of sub-systems, and/or combinations of sub-systems, under linear conditions where appropriate ports are available. The measurements covered are based on the Y-factor method, 3-dB loss method, automatic noise figure meter method and CW method.
Số hiệu tiêu chuẩn
IEC 60510-1-5*CEI 60510-1-5
Tên tiêu chuẩn
Methods of measurement for radio equipment used in satellite earth stations. Part 1: Measurements common to sub-systems and combinations of sub-systems. Section Five: Noise temperature measurements
Ngày phát hành
1988-00-00
Trạng thái
Có hiệu lực
Tiêu chuẩn tương đương
DIN IEC 60510-1-5 (1991-09), IDT * TS IEC 60510-1-5 (2012-02-21), IDT
Tiêu chuẩn liên quan
Thay thế cho
Thay thế bằng
Lịch sử ban hành
IEC 60510-1-5*CEI 60510-1-5 (1988)
Methods of measurement for radio equipment used in satellite earth stations. Part 1: Measurements common to sub-systems and combinations of sub-systems. Section Five: Noise temperature measurements
Số hiệu tiêu chuẩn IEC 60510-1-5*CEI 60510-1-5
Ngày phát hành 1988-00-00
Mục phân loại 33.060.30. Hệ thống thông tin tiếp âm vô tuyến và vệ tinh cố định
Trạng thái Có hiệu lực
Từ khóa
Earth stations * Electrical engineering * Measurement * Measuring techniques * Microwave links * Noise (spurious signals) * Noise temperature * Radio circuits * Radio equipment * Radiocommunication * Satellite communications * Satellite links * Signal transmission * Subsystems * Telecommunication * Telecommunication links * Temperature * Transmission
Số trang
33