Basic environmental testing procedures. Part 2 : Tests. Test U: Robustness of terminations and integral mounting devices

IEC 60068-2-21*CEI 60068-2-21

Số trang: 36
Ngày phát hành: 1983-00-00

Liên hệ

Tóm tắt
Chi tiết

Is applicable to all electrical and electronic components of which the terminations or integral mounting devices are liable to be submitted to stresses during normal assembly or handling operations. Specifies test Ua1: Tensile, test Ua2: Thrust, test Ub: Bending, test Uc: Torsion and test Ud: Torque. Determines that the terminations and attachment of the terminations to the body of the component will withstand such axial stresses, thrusts, bendings, torsions and torques as are likely to be applied during normal assembly or handling operations.

Số hiệu tiêu chuẩn

IEC 60068-2-21*CEI 60068-2-21

Tên tiêu chuẩn

Basic environmental testing procedures. Part 2 : Tests. Test U: Robustness of terminations and integral mounting devices

Ngày phát hành

1983-00-00

Trạng thái

Hết hiệu lực

Tiêu chuẩn tương đương

DIN EN 60068-2-21 (1997-09), IDT * DIN EN 60068-2-21, IDT * DIN IEC 60068-2-21 (1982-01), IDT * BS 2011 Part 2.1U (1977-08-31), IDT * BS 2011-2.1U (1984-01-31), IDT * BS EN 60068-2-21 (1997-06-15), IDT * EN 60068-2-21 (1997-01), IDT * NF C20-712 (1985-12-01), IDT * NF C20-721 (1987-12-01), IDT * NF C20-721 (1998-01-01), IDT * HD 323.2.21 S3 (1988), IDT * JIS C 0051 (1994-04-01), IDT * JIS C 8938 (1995-11-01), MOD * SEV-ASE 3302-2-21 (1985), IDT * OEVE EN 60068-2-21 (1998-02-23), IDT * OEVE HD 323.2.21 S3 (1990-05-22), IDT * UNE 20501-2-21 (1985-12-15), IDT * UNE 20501-2-21 (1994-06-09), IDT * UNE-EN 60068-2-21 (1997-10-17), IDT * GOST 28212 (1989), IDT * DS/IEC 68-2-21, IDT * NEN 10068-2-21, IDT * NP 2827-22 (1987), IDT * STN IEC 60068-2-21 (1992-10-01), IDT * NEN 10068-2-21:1986 en;fr (1986-03-01), IDT * NEN 10068-2-21:1997 en;fr (1997-04-01), IDT

Tiêu chuẩn liên quan

Thay thế cho

Thay thế bằng

IEC 60068-2-21*CEI 60068-2-21 (1999-01)

Lịch sử ban hành

IEC 60068-2-21*CEI 60068-2-21 (2006-06) * IEC 60068-2-21*CEI 60068-2-21 (1999-01) * IEC 60068-2-21*CEI 60068-2-21 (1983)

Từ khóa

Cable junctions * Climatic tests * Connections * Electric appliances * Electric connection * Electric connectors * Electric terminals * Electrical components * Electrical engineering * Electrical equipment * Environment * Environmental testing * Fasteners * Locking and locating devices * Materials testing * Mechanical properties * Mechanical testing * Mounting devices * Resistance * Strength of materials * Stress * Test categories * Testing * Testing conditions * Bolt connections * Torsional strength * Tractive force * Torque * Angle of bend * Degree of sharpness * Screw terminal * Diameter * Cross sections * Shear force * Round wires * Bending force * Wire leads * Bend testing * Final measurements * Tensile strain * Tensile force * Dimensions * Torsion tests * Shear stress * Initial measurements * Lines

Mục phân loại

19.040. Thử môi trường

Số trang

Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
Số hiệu tiêu chuẩn	IEC 60068-2-21*CEI 60068-2-21
Ngày phát hành	1999-01-00
Mục phân loại	19.040. Thử môi trường
Trạng thái	Có hiệu lực

Basic environmental testing procedures. Part 2 : Tests. Test U: Robustness of terminations and integral mounting devices
Số hiệu tiêu chuẩn	IEC 60068-2-21*CEI 60068-2-21
Ngày phát hành	1983-00-00
Mục phân loại	19.040. Thử môi trường
Trạng thái	Có hiệu lực

IEC 60068-2-21*CEI 60068-2-21

LOẠI TIÊU CHUẨN PHỔ BIẾN | TẤT CẢ LOẠI TIÊU CHUẨN