Applies to traction transformers on single-phase a.c. powered vehicles and to the various types of reactors inserted in the main or auxiliary circuits of electric vehicles. Can also be applied, after agreement between user and manufacturer, to the traction transformers of three-phase vehicles and to the transformers inserted in the single-phase or polyphase auxiliary circuits of the vehicles. Deals with service conditions, definitions, cooling, limits of temperature rise, rating plates and tests.
Số hiệu tiêu chuẩn
IEC 60310*CEI 60310
Tên tiêu chuẩn
Rules for transformers and chokes used on traction vehicles (electrically powered vehicles)
Ngày phát hành
1969-00-00
Tiêu chuẩn tương đương
DIN 57535-2 (1982-04), IDT * DIN 57535-2 (1980-11), IDT * BS 173 (1980-07-31), MOD * SEV-ASE 3171 (1972-02), IDT * SEN 810100 (1974-11-15), MOD * AMD 4729 (1984), MOD * NBN C 52-002 (1978), IDT * NEN 10310 (1970), IDT * NEN 10310:1970 en;fr (1970-11-01), IDT
Từ khóa
Acceptance inspection * Air-cooled systems * Chokes * Chokes (electric) * Cooling * Definitions * Direct current * Electrical engineering * Idle mode * Impedance voltage * Impulse voltages * Impulse-voltage tests * Inductance * Inspection specification * Marking * Measurement * Railway applications * Railway vehicles * Railways * Rated power * Rated voltage * Road vehicles * Safety engineering * Tappings (electrical) * Temperature-rise limit * Tolerances (measurement) * Traction vehicles * Transformers * Translations * Vehicles * Windings * Withstand voltage * Dielectric strength * Power frequency withstand voltage * Ambient temperature * Symbols * Resistance * Impact loading * Shock stress * Voltage * Smoothing * Rated withstand voltage * Checks * Testing * Alternating current * Qualification tests * Rated impulse withstand voltage * Temperature * Operating conditions * Transmission * No-load loss * Inductors * Heating measurements * Alternating-current reactors * Pulsating d.c. current * No-load current * Total loss * Scope * Insulating materials * Reference temperatures * Short-circuit strength * Short circuit losses * Losses * Heating * Routine check tests * Interference elimination * Stress * Traction motors * Frequencies * Interference protection * Electromobiles * Transition reactors * Classes * Electrical resistance * Testing voltages * Adjustments * Rating plates * Resistors * Sheets * Tramway systems * Main tapping * Dynamic stress
IEC 60310*CEI 60310
.png)
.jpg){kind=logo}
.jpg){kind=logo}
-_-logo.png){kind=logo}
