This European Standard specifies the requirements for factory made products of expanded cork, which are used for the thermal insulation of buildings. The products are made with granulated cork agglomerated without additional binders and are delivered as boards without facings or coatings. Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. This standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non-conflicting standards. Products with a declared thermal resistance lower than 0,25 m2K/W, or a declared thermal conductivity greater than 0,060 W/(mK), at 10 °C, are not covered by this European Standard.
Số hiệu tiêu chuẩn
prEN 13170
Tên tiêu chuẩn
Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
Ngày phát hành
2010-04-00
Tiêu chuẩn tương đương
DIN EN 13170 (2010-05), IDT * 10/30213983 DC (2010-04-22), IDT * P75-414PR, IDT * OENORM EN 13170 (2010-06-01), IDT
Từ khóa
Applications * Bending strength * Boards * Buildings * Bulk density * CE marking * Checks * Classification * Compatibility * Compression stresses * Conditions * Conformity * Construction * Construction materials * Controlled atmospheres * Cork * Creep behaviour * Definitions * Design * Dimensions * Drag * Energy conservations * Energy economics * Evaluations * Expansion * Fire hazards * Fire risks * Form of delivery * Immersion * Input * Inspection * Insulating boards * Insulating materials * Labelling * Limit deviations * Marking * Material properties * Moisture * Moisture contents * Packages * Plate plane * Plates * Preconditioning * Production control * Products * Properties * Quality assurance * Ratings * Roofs * Sampling methods * Shearing * Sound * Sound absorption * Specification * Specification (approval) * Stability of dimensions * Stiffness * Strength of materials * Surface spread of flame * Surveillance (approval) * Temperature * Tensile strength * Testing * Thermal conductivity * Thermal insulating materials * Thermal insulation * Thermal protection * Thermal resistance * Thermal stress * Water absorption * Water vapour permeability * Wheel works * Implementation * Planks * Sheets * Pretreatment * Requirements * Standard climates * Water vapour transmission * Panels * Tiles * Use
prEN 13170
.png)
.jpg){kind=logo}
.jpg){kind=logo}
-_-logo.png){kind=logo}
