EN ISO 15875-3

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003)

2003-12-00

Có hiệu lực

DIN EN ISO 15875-3 (2004-03), IDT * BS EN ISO 15875-3 (2004-06-14), IDT * NF T54-943-3 (2004-05-01), IDT * ISO 15875-3 (2003-12), IDT * SN EN ISO 15875-3 (2004-03), IDT * OENORM EN ISO 15875-3 (2004-06-01), IDT * PN-EN ISO 15875-3 (2005-11-08), IDT * SS-EN ISO 15875-3 (2004-01-09), IDT * UNE-EN ISO 15875-3 (2004-07-30), IDT * UNI EN ISO 15875-3:2007 (2007-03-28), IDT * STN EN ISO 15875-3 (2004-05-01), IDT * STN EN ISO 15875-3 (2005-01-01), IDT * CSN EN ISO 15875-3 (2004-12-01), IDT * DS/EN ISO 15875-3 (2004-05-12), IDT * NEN-EN-ISO 15875-3:2004 en (2004-05-01), IDT * SFS-EN ISO 15875-3:en (2004-05-07), IDT

EN ISO 228-1 (2003-02) * EN ISO 15875-1 (2003-12) * EN ISO 15875-2 (2003-12) * EN 578 (1993-07) * EN 579 (1993-07) * EN 681-1 (1996-04) * EN 681-2 (2000-07) * EN 921 (1994-11) * EN 1254-3 (1998-01) * EN 10088-1 (1995-04) * prEN 10226-1 (2003-10) * EN 12107 (1997-08) * EN ISO 3126 (2005-03) * EN ISO 9080 (2003-03) * EN ISO 15875-5 (2003-12) * ISO 12092 (2000-04)

prEN ISO 15875-3 (2002-11)

EN ISO 15875-3 (2003-12) * prEN ISO 15875-3 (2002-11) * prEN 12318-3 (1996-02)

Buildings * Cold * Cold water * Definitions * Drinking water lines * Drinking water supply * Fittings * Heating coil welding * House installations * Installations * Marking * Mechanical properties * PE * PE-X * Pipe couplings * Pipelines * Pipes * Piping system * Plastic pipelines * Plastic pipes * Plastics * Polyethylene * Potable water * Properties * Service installations in buildings * Service water * Specification (approval) * Testing * Tolerances (measurement) * Warm water * Water * Water pipes * Water practice * Water supply * Welded joints * Plastic tubes * Drinking water

23.040.45. Ðầu nối bằng chất dẻo
91.140.60. Hệ thống cung cấp nước

16