Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar

EN 88-2

Số trang: 42
Ngày phát hành: 2007-11-00

Liên hệ

Tóm tắt
Chi tiết

This European Standard specifies the safety, construction and performance requirements for pressure regulators (hereafter referred to as regulators) intended for use with gas burners and gas-burning appliances using fuel gases of the 1 st , 2 nd and 3 rd families. This European Standard covers type testing only. It also provides additional information for the purchaser and user. This European Standard is applicable to regulators that may be tested independently of gas burners and gas-burning appliances, which have a declared working pressure from above 500 mbar up to and including 5 bar. This European Standard is also applicable to regulators incorporating safety devices. NOTE 1 For safety accessories and pressure accessories, the requirements of EN 13611:2007, Annex F also apply. NOTE 2 Regulators conforming to EN 88-2 fulfil also the requirements of EN 88-1. Regulators intended to be used on pipe work installations for third family gases are also covered by EN 13785 and EN 13786. This European Standard is not applicable to: a) pressure regulators that are connected directly to mains pipe-work or to a container that maintains a standard distribution pressure; b) pressure regulators which use electrical auxiliary energy.

Số hiệu tiêu chuẩn

EN 88-2

Tên tiêu chuẩn

Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar

Ngày phát hành

2007-11-00

Trạng thái

Có hiệu lực

Tiêu chuẩn tương đương

DIN EN 88-2 (2008-03), IDT * BS EN 88-2 (2007-12-31), IDT * NF D36-302-2 (2008-01-01), IDT * SN EN 88-2 (2008-02), IDT * OENORM EN 88-2 (2008-02-01), IDT * PN-EN 88-2 (2007-12-04), IDT * SS-EN 88-2 (2007-11-26), IDT * UNE-EN 88-2 (2008-07-23), IDT * TS 10624 (2009-05-28), IDT * TS EN 88-2 (2008-04-24), IDT * UNI EN 88-2:2008 (2008-03-13), IDT * STN EN 88-2 (2008-05-01), IDT * CSN EN 88-2 (2008-06-01), IDT * DS/EN 88-2 (2008-02-22), IDT * JS 10068-2 (2011-02-01), IDT * NEN-EN 88-2:2007 en (2007-11-01), IDT * SFS-EN 88-2:en (2008-06-13), IDT

Tiêu chuẩn liên quan

EN 60534-1 (2005-02) * EN ISO 228-1 (2003-02) * ISO 7-1 (1994-05) * EN 88-1 (2007-11) * EN 549 (1994-11) * EN 682 (2002-02) * EN 13611 (2007-11) * EN 13787 (2001-10) * EN 60534-2-3 (1998-02) * EN ISO 6708 (1995-07) * ISO 3419 (1981-07)

Thay thế cho

prEN 88-2 (2007-02)

Thay thế bằng

Lịch sử ban hành

EN 88-2 (2007-11) * prEN 88-2 (2007-02) * prEN 88-2 (2006-03) * prEN 88-2 (2004-03)

Từ khóa

Ambient temperature * Assembly instructions * Bending * Bodies * Checking equipment * Chemical hazards * Classes * Classification * Compression fittings * Conditions * Connecting dimensions * Connections * Construction requirements * Control performance * Controllers * Corrosion * Definitions * Density * Design * Deviations * Dimensions * Durability * Elastomers * Enclosures * Exits * Explosion hazard * Fire risks * Gas appliances * Gas burners * Gas families * Gas permeability * Gas pressure * Gas pressure governors * Gas technology * Gas tightness * Gaskets * Gas-powered devices * Graphic * Impregnation * Inlet pressure * Leak rate * Maintenance * Marking * Materials * Mechanical testing * Moisture * Moisture test * Mounting dimensions * Noise during operation * Nominal widths * Operating instructions * Performance requirements * Pipes * Pressure drops * Pressure instruments * Pressure measurement (fluids) * Pressure regulators * Put out of action * Safety components * Safety engineering * Safety requirements * Safety shut-off devices * Seals * Solderless * Specification (approval) * Stability * Status * Test equipment * Testing * Thermal environment systems * Thread-connections * Threads * Tightness * Tolerances (measurement) * Transportable * User information * Warning notices * Wobbe index * Zinc alloys * Endurance tests * Freedom from holes * Impermeability * Requirements * Storage quality * Variations * Testing devices * Lines

Mục phân loại

23.060.40. Bộ điều chỉnh áp suất

Số trang

Industrial-process control valves - Part 1: Control valve terminology and general considerations (IEC 60534-1:2005)
Số hiệu tiêu chuẩn	EN 60534-1
Ngày phát hành	2005-02-00
Mục phân loại	01.040.23. Hệ thống và kết cấu truyền dẫn chất lỏng công dụng chung (Từ vựng) 23.040.60. Mặt bích, chỗ nối và các nối ống khác
Trạng thái	Có hiệu lực

Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
Số hiệu tiêu chuẩn	EN ISO 228-1
Ngày phát hành	2003-02-00
Mục phân loại	21.040.30. Ren đặc biệt
Trạng thái	Có hiệu lực

Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation
Số hiệu tiêu chuẩn	ISO 7-1
Ngày phát hành	1994-05-00
Mục phân loại	21.040.20. Ren whitworth 21.040.30. Ren đặc biệt
Trạng thái	Có hiệu lực

Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
Số hiệu tiêu chuẩn	prEN 88-2
Ngày phát hành	2007-02-00
Mục phân loại	23.060.40. Bộ điều chỉnh áp suất
Trạng thái	Có hiệu lực

Pressure governors and associated safety devices for gas appliances for inlet pressures between 0.5 bar and 5 bar
Số hiệu tiêu chuẩn	prEN 88-2
Ngày phát hành	2004-03-00
Mục phân loại	23.060.40. Bộ điều chỉnh áp suất
Trạng thái	Có hiệu lực

EN 88-2

LOẠI TIÊU CHUẨN PHỔ BIẾN | TẤT CẢ LOẠI TIÊU CHUẨN