1.1 This specification covers a group of common requirements that shall apply to carbon, alloy, stainless steel, and nickel alloy bolting under any of the following ASTM Specifications (or under any other ASTM Specifications that invoke this specification or portions thereof): Title of Specifications ASTM Designation Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service A193/A193M Carbon and Alloy Steel Nuts for Bolts for High Pressure and High-Temperature Service A194/A194M Alloy Steel Bolting Materials for Low-Temperature Service A320/A320M Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service A437/A437M High-Temperature Bolting Materials With Expansion Coefficients Comparable to Austenitic Stainless Steels A453/A453M Alloy-Steel Bolting Materials for Special Applications A540/A540M Precipitation-Hardening Bolting Material (UNS N07718) for High Temperature Service A1014/A1014M 1.2 In case of conflict the requirements of the individual product specification shall prevail over those of this specification. 1.3 Additional requirements may be specified by mutual agreement between the purchaser and supplier. 1.4 Supplementary requirements are provided for use at the option of the purchaser. The supplementary requirements only apply when specified individually by the purchaser in the purchase order or contract. 1.5 This specification is expressed in both inch-pound units and in SI units; however, unless the purchase order or contract specifies the applicable "M" specification designation (SI units) the inch-pound units shall apply. The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.