The standard provides specifications, recommendations and guidance for the agreements to be made between the client, the galvanizer / sherardizer, the chemical suppliers and the applicators of the pretreatment and the powder organic coating systems (if they are not one and the same). This standard applies to the application of hot dip galvanized, sherardized and powder organic coatings by controlled industrial processes to articles consisting of or manufactured from steel. The standard applies to hot dip galvanized products, galvanized in accordance with EN ISO 1461 and EN 10240 or products sherardized in accordance with EN 13811, as well as parts of these products manufactured from continuously galvanized sheet and strip galvanized in accordance with EN 10326 or EN 10327, which, after the galvanizing and/or assembly, or sherardizing, will have a powder organic coating system applied. This standard also applies to products which have been hot dip galvanized or sherardized according to specific product standards to which powder organic systems are applied. This standard also contains additional recommendations and guidance on quality requirements for the galvanized or sherardized articles to which the powder organic coating systems are to be applied and for the pre-treatment and powder organic coating systems intended for application to the galvanized or sherardized articles. This standard may also be useful when supplying other organic coating systems (excluding wet paint systems).